CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    826 Landfill Compactor
    View Product
    CB15 Tandem Vibratory Roller
    View Product Remove
    CB4.4 Utility Compactor
    View Product Remove
    CC2.7 Utility Compactor
    View Product Remove
    CB16 Tandem Vibratory Roller
    View Product Remove
    CB13 Tandem Vibratory Roller
    View Product Remove
    CB2.9 Utility Compactor
    View Product Remove

    Engine
    Gross Power - SAE J1995:2014 435 hp - - - - - -
    Net Power - SAE J1349:2011 405 hp - - - - - -
    Net Power - ISO 9249:2007 405 hp - - - - - -
    Engine Power - ISO 14396:2002 426 hp - - - - - -
    Engine Model C15 Cat® Cat_C4.4 C1.7T C1.7T Cat C4.4 Cat C4.4 C1.7T
    Emissions U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA - - - - - -
    Rated Speed 1800 - - - - - -
    Torque Rise 33% - - - - - -
    Bore 5.4 in - - - - - -
    Stroke 6.7 in - - - - - -
    Displacement 927.6 in³ - - - - - -
    High Idle Speed 2300 r/min - - - - - -
    Low Idle Speed 800 r/min - - - - - -
    Maximum Altitude – Without Derating (Tier 4 Final/Stage V) 9298 ft - - - - - -
    Maximum Altitude - Without Derating (Tier 3/Stage IIIA) 9098 ft - - - - - -
    Note Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - - - - - -
    Gross Power - 142 hp - 48.2 hp 142 hp 142 hp -
    Engine Power (1) - - 48.2 hp 48.2 hp - - 48.2 hp

    Operating Specifications
    Operating Weight (Tier 4 Final/Stage V) 90207 lb - - - - - -
    Operating Weight (Tier 3/Stage IIIA equivalent) 89186 lb - - - - - -
    Maximum Operating Weight (Tier 4 Final/Stage V) 92568 lb - - - - - -
    Maximum Operating Weight (Tier 3/Stage IIIA equivalent) 91549 lb - - - - - -
    Standard Compaction Width - 84 in 51.2 in - 84 in 79 in -
    Drum Offset - 6 in 2 in 2 in 6 in 6 in 2 in
    Curb Clearance - 28 in 19.6 in 17.8 in 28 in 28 in 17.8 in
    Ground Clearance - 11.5 in 11.2 in 11.2 in 11.5 in 11.5 in 11.2 in
    Travel Speed - Maximum - - 7.5 mile/h 6.8 mile/h - - 7.5 mile/h
    Turning Radius - Inside Drum Edge - - 115.2 in 100 in - - 98 in
    Turning Radius - Outside Drum Edge - - 166.4 in 147.2 in - - 149.2 in
    Static Linear Load - - 59.8 lb/in 66.2 lb/in - - 59.8 lb/in
    Number of Wheels - - - 4 - - -
    Speed Range - - - - - - 12 km/hr 7.5 mph

    Transmission
    Transmission Type Planetary - Powershift - ECPC - - - - - -
    Direct Drive - Forward 1 4.2 mile/h - - - - - -
    Direct Drive - Forward 2 7.5 mile/h - - - - - -
    Direct Drive - Reverse 1 4.3 mile/h - - - - - -
    Direct Drive - Reverse 2 8.6 mile/h - - - - - -

    Hydraulic System
    Pump Flow at 1800 rpm 30.9 gpm - - - - - -
    Main Relief Pressure 3771 psi - - - - - -
    Maximum Supply Pressure 3495 psi - - - - - -
    Lift System Double Acting Cylinder - - - - - -
    Bore 4.7 in - - - - - -
    Stroke 42.1 in - - - - - -

    Service Refill Capacities
    Cooling System 30.6 gal (US) - - - - - -
    Engine Crankcase 9 gal (US) - - - - - -
    Transmission 17.4 gal (US) - - - - - -
    Fuel Tank 206.6 gal (US) - - - - - -
    Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V) 8.5 gal (US) - - - - - -
    Differential - Final Drives - Front 26.4 gal (US) - - - - - -
    Differential - Final Drives - Rear 29.1 gal (US) - - - - - -
    Hydraulic Tank Only 35.4 gal (US) - - - - - -
    Note Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H - - - - - -
    Fuel Tank Capacity - 66 gal (US) 21.43 gal (US) 14.37 Gal 66 gal (US) 66 gal (US) 14.37 gal (US)
    Water Spray Tank Capacity - 264 gal (US) 61 gal (US) 42.24 gal (US) 264 gal (US) 264 gal (US) 52.8 gal (US)
    Tire Spray Tank Capacity - - 9.2 gal (US) - - - -

    Axles
    Front Planetary - Fixed - - - - - -
    Rear Planetary - Oscillating - - - - - -
    Oscillation Angle ±5° - - - - - -

    Braking System
    Service Brakes Multi Disc Wet (Enclosed) 2 WHL - - - - - -
    Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released - - - - - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - - - - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - - - - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - - - - -
    Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - - - - - -
    Note (1) * Sound suppression equipped - - - - - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - - - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - - - - -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - - - - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - - - - -
    Machine Sound Power Level (ISO 6395:2008)* 110 dB(A) - - - - - -
    Note (1) * Sound suppression equipped - - - - - -
    Note (2) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - - -
    Note (3) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - - - - - -
    Note (4) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot operated, load sensing - - - - - -
    Bore 4.5 in - - - - - -
    Stroke 22.7 in - - - - - -
    Steering System - Pump Piston - Variable Displacement - - - - - -
    Maximum System Flow 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) - - - - - -
    Steering Pressure Limited 3481 psi - - - - - -
    Vehicle Articulation Angle 86 ° - - - - - -

    Dimensions (Approximate)
    Height to Top of Air Conditioning Condenser 14.99 ft - - - - - -
    Height - Cab Roof 13.75 ft - - - - - -
    Height - Top of Beacon 15.63 ft - - - - - -
    Height - Top of Exhaust Pipe 14.56 ft - - - - - -
    Height - Top of Hood 10.87 ft - - - - - -
    Ground Clearance - Bumper 3.15 ft - - - - - -
    Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard 9.38 ft - - - - - -
    Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard 10.16 ft - - - - - -
    Hitch to Centerline of Front Axle 6.07 ft - - - - - -
    Wheel Base 12.14 ft - - - - - -
    Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard 28.59 ft - - - - - -
    Ground Clearance 2.11 ft - - - - - -
    Width - Over Wheels 12.47 ft - - - - - -
    Turning Radius - Inside of Wheels 9.18 ft - - - - - -

    Straight Blade
    Width – Moldboard Length 14.16 ft - - - - - -
    Width - Over End Bits 14.75 ft - - - - - -
    Height with Cutting Edge and Screen 6.23 ft - - - - - -
    Maximum Depth of Cut 1.5 ft - - - - - -
    Maximum Lift above Ground 4.19 ft - - - - - -
    Capacity, Rated 16.1 yd³ - - - - - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 28.59 ft - - - - - -

    Semi U-Blade
    Width – Moldboard Length 14.66 ft - - - - - -
    Width - Over End Bits 14.83 ft - - - - - -
    Height with Cutting Edge and Screen 6.63 ft - - - - - -
    Maximum Depth of Cut 2.03 ft - - - - - -
    Maximum Lift above Ground 3.825 ft - - - - - -
    Capacity, Rated 20.9 yd³ - - - - - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 29.54 ft - - - - - -

    U-Blade
    Width – Moldboard Length 14.25 ft - - - - - -
    Width - Over End Bits 14.41 ft - - - - - -
    Height with Cutting Edge and Screen 6.62 ft - - - - - -
    Maximum Depth of Cut 2.03 mm - - - - - -
    Maximum Lift above Ground 3.79 ft - - - - - -
    Capacity, Rated 22.9 yd³ - - - - - -
    Overall Machine Length (includes rear radiator guard, measured to cutting edge) 30.7 ft - - - - - -

    Wheels
    Combination Tips (Weight Group) 21125 lb - - - - - -
    Plus Tips - Weight (Group) 22002 lb - - - - - -
    Paddle Tips - Weight (Group) 20540 lb - - - - - -
    Diamond Tips Weight (Group) 23997 lb - - - - - -
    Outside Diameter 77.6 in - - - - - -
    Outside Diameter - Diamond 78.1 in - - - - - -
    Drum Diameter 63.4 in - - - - - -
    Drum Width 47.2 in - - - - - -
    Feet Per Row 6 - - - - - -
    Feet Per Wheel 30 - - - - - -
    Replaceable Weld On - - - - - -
    Width Over Drums 3800 mm - - - - - -
    Tip Height 179 mm - - - - - -
    Tip Height - Diamond 7.25 in - - - - - -

    Weights
    Standard - Operating Weight - 28958 lb - - 31941 lb 27557 lb -
    Static Linear Load - 186 lb/in 76.6 lb/in 61 lb/in 204 lb/in 189 lb/in 59.8 lb/in
    Maximum Operating Weight - 30391 lb - 6114 lb 34255 lb 28991 lb -
    Standard Operating Weight with ROPS - - 7889 lb 5718 lb - - 6415 lb
    Maximum Weight at Front Drum - - 3918 lb - - - 3060 lb
    Maximum Weight at Rear Drum - - 3971 lb - - - 3355 lb
    Maximum Operating Weight with ROPS - - 3936 lb - - - 6415 lb
    Maximum Operating Weight with Cab - - - - - - 6415 lb

    Travel Speeds
    High - 8 mile/h - - 8 mile/h 8 mile/h -
    Low - 4 mile/h - - 4.5 mile/h 4 mile/h -

    Dimensions
    Overall Length - 15.5 ft 112.3 in 99.2 in 15.5 ft 15.5 ft 99.2 kg/cm
    Wheel Base - 11.25 ft 80.7 in 70.9 in 11.25 ft 11.25 ft 70.9 in
    Height - With ROPS/FOPS - 10 ft - - 10 ft 10 ft -
    Overall Width - 92 in 55.1 in 51.7 in 92 in 92 in 55.6 in
    Compaction Width - - 51.2 in 47.2 in - - 51.2 in
    Drum Width - - 51.2 in 47.2 in - - 51.2 in
    Drum Diameter - - 31.5 in 28.3 in - - 28.3 in
    Height - ROPS - - 104.7 in 109.7 in - - 70.8 in

    Vibratory System
    Centrifugal Force per Drum - Maximum - 31069 lb - 7929 lb/ft 31069 lb 24728 lb -
    Centrifugal Force per Drum - Minimum - 12409 lb - - 12409 lb 7800 lb -
    Maximum Amplitude - 0.041 in - - 0.041 in 0.038 in -
    Minimum Amplitude - 0.01 in - - 0.01 in 0.012 in -
    Maximum Frequency - 2520 VPM - 3840 VPM 3800 VPM 3800 VPM -
    Minimum Frequency - 2520 VPM - 3180 VPM 2520 VPM 2520 VPM -
    Vibration Selection - Independent per drum, front only, rear only, both - - Independent per drum, front only, rear only, both - -
    Frequency - - 3300 VPM - - - 3840 VPM
    Nominal Amplitude - High - - 0.02 in 0.02 in - - 0.02 in
    Centrifugal Force - Maximum - - 7524 lb/ft - - - 8109 lb/ft
    Add a Similar Product:
    • CP56B Vibratory Soil Compactor Add
    • CP11 GC Vibratory Soil Compactor Add
    • CS11 GC Vibratory Soil Compactor Add
    • CS10 GC Vibratory Soil Compactor Add
    • CB4.0 Utility Compactor Add
    • CB4.4 Utility Compactor Add
    • CC2.7 GC Utility Compactor Add
    • CB2.7 GC Utility Compactor Add
    • CB2.5 GC Utility Compactor Add
    • CB2.7 Utility Compactor Add