Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	950 GC Wheel Loader \| Front Loader View Product Remove	986 Wheel Loader View Product Remove	992 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	449 hp	-
Engine Model	Cat® C18	Cat C7.1	Cat® C15	Cat® C32B
Rated Speed	1700/rpm	-	2000	1750 rpm
Peak Power Speed	1500/rpm	-	1600	-
Gross Power - SAE J1995:2014	588 hp	-	456 hp	-
Net Power - SAE J1349:2011	538 hp	-	373 hp	-
Bore	5.7 in	4.13 in	5.4 in	5.7 in
Stroke	7.2 in	5.31 in	6.75 in	6.4 in
Displacement	1105 in³	428 in³	927 in²	1963.5 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	-
Torque Rise	58 %	-	16%	-
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-
Net Power - ISO 9249	-	225 hp	-	-
Emissions	-	Tier 4/Stage V	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Note	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	-	-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	228 hp	-	-
Maximum Power - 1,700 rpm - ISO 14396	-	240 hp	-	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	243 hp	-	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	811 ft·lbf	-	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	805 ft·lbf	-	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	225 hp	-	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	225 hp	-	-
Maximum Power - 1,700 rpm - SAE J1995	-	241 hp	-	-
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	373 hp	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	373 hp	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	1778 lb/ft	-
Net Power	-	-	-	814 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	-	900 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	937 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	-	907 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	944 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	884 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	921 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	893 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	931 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	823 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	823 hp
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	-	3514 ft·lbf
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	-	3555 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	-	3537 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	-	3570 ft·lbf
Operating Specifications
Operating Weight	112574 lb	-	-	233430 lb
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	5.0-10.3 m³ (6.5-13.5 yd³)	11.5-24.5 m³ (15-32 yd³)
Rated Payload - Quarry Face	12.5 t	-	-	-
Rated Payload - Loose Material	16 t	-	-	-
Cat Truck Match - Standard	770 - 772	-	770/735/740/745	775/777
Cat Truck Match - High Lift	773 - 775	-	772/773	785
Operating Weight - Standard	-	-	97785 lb	-
Operating Weight - High Lift	-	-	104005 lb	-
Rated Payload - Standard (Quarry Face)	-	-	11 ton (US)	-
Rated Payload - Loose Material (Standard)	-	-	14 ton (US)	-
Rated Payload - High Lift (Quarry Face)	-	-	11 ton (US)	-
Rated Payload - Loose Material (High Lift)	-	-	12.1 ton (US)	-
Rated Payload - Standard	-	-	-	25.5 ton (US)
Rated Payload - Standard (Material Handler)	-	-	-	30 ton (US)
Rated Payload - High Lift	-	-	-	22.5 ton (US)
Rated Payload - High Lift (Material Handler)	-	-	-	27 ton (US)
Transmission
Transmission Type	Cat planetary powershift	-	Cat planetary power shift	Cat Planetary Powershift
Forward - 1	4 mile/h	4.5 mile/h	5 mile/h	4.3 mile/h
Forward - 2	7.2 mile/h	8 mile/h	8 mile/h	7.4 mile/h
Forward - 3	12.7 mile/h	14.2 mile/h	-	12.7 mile/h
Forward - 4	21.6 mile/h	22.4 mile/h	-	-
Reverse - 1	4.7 mile/h	4.5 mile/h	5 mile/h	4.7 mile/h
Reverse - 2	8.3 mile/h	8 mile/h	8 mile/h	8.1 mile/h
Reverse - 3	14.4 mile/h	14.2 mile/h	-	13.9 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	Disabled
Direct Drive - Forward 2	7.8 mile/h	-	8 mile/h	8 mile/h
Direct Drive - Forward 3	13.9 mile/h	-	14 mile/h	14 mile/h
Direct Drive - Forward 4	24.4 mile/h	-	24 mile/h	-
Direct Drive - Reverse 1	5 mile/h	-	-	5 mile/h
Direct Drive - Reverse 2	8.9 mile/h	-	9 mile/h	8.8 mile/h
Direct Drive - Reverse 3	15.8 mile/h	-	16 mile/h	15.3 mile/h
Note	-	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	-	-
Direct Drive - Reverse 4	-	-	25.4 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	Load Sense	Positive Flow Control
Lift/Tilt System - Pump	Variable displacement piston	-	2 × 110 cc variable displacement	Variable Displacement Piston
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	4050 psi	5000 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	-
Pilot System	Variable displacement piston	-	-	-
Relief Valve Setting - Main	551 psi	-	-	-
Maximum Flow at 2,165 rpm	-	-	123 gpm	250 gpm
Lift Cylinder - Bore	-	-	7.5 in	9.3 in
Lift Cylinder - Stroke	-	-	45 in	63.5 in
Tilt Cylinder - Bore	-	-	6.7 in	11.5 in
Tilt Cylinder - Stroke	-	-	28.4 in	41.5 in
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-
Raise	8 s	-	-	-
Dump	2.2 s	-	-	-
Lower Float Down	3.5 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Load Sense	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	-	Piston, variable displacement	Piston, Variable Displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-
Relief Valve Setting - Steering	4351 psi	-	-	-
Total Steering Angle	86 °	-	70°	80°
Steering Cycle Times - High Idle	3.4 s	-	-	3.1 s
Steering Cycle Times - Low Idle	5.6 s	-	-	4.9 s
Maximum Flow at 1,400 rpm	-	-	52 gpm	-
Steering Cut Off Pressure	-	-	4000 psi	4500 psi
Maximum Flow at 1,400-1,850 rpm	-	-	-	70 gpm
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-
Axles
Front	Fixed	-	Fixed	Fixed
Rear	Trunnion	-	Trunnion	Trunnion
Oscillation Angle	13 °	-	±12.5°	±9°
Oscillation Angle - Chain Arrangement	-	-	±8.5°	-
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	110 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	74 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	113 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	73 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Service Refill Capacities
Fuel Tank	188 gal (US)	-	141 gal (US)	385.7 gal (US)
Cooling System	31.7 gal (US)	13.2 gal (US)	-	-
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-
Crankcase	15.9 gal (US)	4.8 gal (US)	9 gal (US)	31.7 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-
Transmission	24.3 gal (US)	11.9 gal (US)	20 gal (US)	51.5 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	10.6 gal (US)	-	96.4 gal (US)
Differential - Final Drives - Rear	49.1 gal (US)	10 gal (US)	-	96.4 gal (US)
Hydraulic System Factory Fill	125.5 gal (US)	-	87 gal (US)	-
Hydraulic System - Tank Only	63.4 gal (US)	-	34 gal (US)	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	-	-
DEF Tank	-	4.2 gal (US)	-	-
Fuel Tank Size	-	76.6 gal (US)	-	-
Hydraulic Tank	-	29.6 gal (US)	-	-
Fuel Tank - Short Lift	-	-	127 gal (US)	-
Cooling Systems	-	-	26 gal (US)	59.4 gal (US)
Diesel Exhaust Fluid Tank	-	-	6 gal (US)	-
Axle Oil - Differentials and Final Drives - Front	-	-	49 gal (US)	-
Axle Oil - Differentials and Final Drives - Rear	-	-	45 gal (US)	-
Hydraulic System Factory Fill (Implement)	-	-	-	104.1 gal (US)
Hydraulic Tank - Implement	-	-	-	60.2 gal (US)
Hydraulic Factory Fill (Steering)	-	-	-	32.5 gal (US)
Hydraulic Tank (Steering Tank Only)	-	-	-	26.3 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	13.5 ft	-
Ground to Top of Exhaust Stacks	14.8 ft	-	13.3 ft	-
Ground to Top of Hood	10.9 ft	-	10.7 ft	-
Rear Axle - Centerline to Bumper	10.5 ft	-	10.3 ft	-
Front Axle Centerline to Bucket Tip	14 ft	-	13.8 ft	-
Wheel Base	14.9 ft	-	12.5 ft	-
Maximum Overall Length	39.3 ft	-	36.6 ft	-
Ground to Lower Hitch Clearance	1.9 ft	-	1.5 ft	-
Clearance at Maximum Lift	11.9 ft	-	10.1 ft	-
B-Pin Height - Maximum Lift	18 ft	-	16.1 ft	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	22.4 ft	-
Reach - Maximum Lift	6.5 ft	-	7.1 ft	-
Ground to Center of Front Axle	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-
Note	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	13.5 ft	-
Ground to Top of Exhaust Stacks	14.8 ft	-	13.3 ft	-
Ground to Top of Hood	10.9 ft	-	10.7 ft	-
Rear Axle - Centerline to Bumper	10.5 ft	-	10.3 ft	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	15.3 ft	-
Wheel Base	14.9 ft	-	12.5 ft	-
Maximum Overall Length	40.7 ft	-	38 ft	-
Ground to Lower Hitch Clearance	1.9 ft	-	1.5 ft	-
Clearance at Maximum Lift	13.3 ft	-	11.6 ft	-
B-Pin Height - Maximum Lift	19.3 ft	-	17.6 ft	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	23.9 ft	-
Reach - Maximum Lift	6.8 ft	-	7.4 ft	-
Ground to Center of Front Axle	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-
Note	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Weights
Operating Weight	-	41554 lb	-	-
Buckets
Bucket Capacities	-	2.9-4.4 m³ (3.75-5.75 yd³)	-	11.5-24.5 m³ (15-32 yd³)
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	76 dB(A)*	-	-
Note (1)	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	73 dB(A)	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	For machines in European Union countries and in countries that adopt the EU Directives	-	-
With Cooling Fan Speed at Maximum Value - Note	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	107 LWA***	-	-
Note (3)	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-
Note (2)	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	73 dB(A)	-	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	109 dB(A)	-	-
Dimensions
Rack Back - Ground	-	40 degrees	-	-
Height - Top of Exhaust Pipe	-	11.17 ft	-	-
Centerline of Rear Axle to Hitch	-	5.42 ft	-	-
Lift Arm Clearance	-	12 ft	-	-
B-Pin Height	-	13.75 ft	-	-
Centerline of Rear Axle to Edge of Counterweight	-	6.75 ft	-	-
Ground Clearance	-	1.5 ft	-	-
Rack Back - Maximum Lift	-	60 degrees	-	-
Height - Top of Hood	-	8.75 ft	-	-
Wheel Base	-	10.83 ft	-	-
Height - Top of ROPS	-	11.33 ft	-	-
Rack Back - Carry	-	45 degrees	-	-
Note	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-	-
Weights and Operating Specifications
Note (2)	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-
Tipping Load - Full Turn - Rigid Tires**	-	25875 lb	-	-
Breakout Force	-	34638 lbf	-	-
Tipping Load - Full Turn - ISO 14397-1*	-	24264 lb	-	-
Note (3)	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-	-
Operating Weight	-	41554 lb	-	-
Note (1)	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-	-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	9.4 s	-	-
Steering System - Pump Type	-	Piston	-	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	4047 psi	-	-
Implement System - Maximum Pump Output at 2,390 rpm	-	68 gpm	-	-
Engine - Tier 4 Final/Stage IV
Emissions	-	Tier 4/Stage IV	-	-
Hydraulic Cycle Times
Rack Back	-	-	4.5 s	2.3 s
Raise	-	-	9 s	9 s
Dump	-	-	3.5 s	2.6 s
Lower	-	-	5.2 s	-
Lower Float Down	-	-	4.3 s	-
Total Hydraulic Cycle Time	-	-	21.3 s	17.1 s
Rack Back - High Lift	-	-	-	2.3 s
Raise - High Lift	-	-	-	9 s
Dump - High Lift	-	-	-	2.6 s
Float Down	-	-	-	3.2 s
Float Down - High Lift	-	-	-	3.2 s
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-
Ground to Top of Hood	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-
Reach at Maximum Lift	-	-	8 ft	-
Clearance at Maximum Lift	-	-	10.7 ft	-
B-Pin Height at Maximum Lift	-	-	15 ft	-
Maximum Overall Height, Bucket Raised	-	-	20.9 ft	-
Rear Axle Center Line to Bumper	-	-	10.3 ft	-
Wheel Base	-	-	12.5 ft	-
Maximum Overall Length	-	-	35 ft	-
Front Axle Centerline to Bucket Tip	-	-	12.2 ft	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-
Ground to Top of Hood	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-
B-Pin Height at Maximum Lift	-	-	15 ft	-
Rear Axle Center Line to Bumper	-	-	10.3 ft	-
Wheel Base	-	-	12.5 ft	-
Maximum Overall Length	-	-	35.4 ft	-
Front Axle Centerline to Bucket Tip	-	-	12.6 ft	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	-	109.4 °F
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	-	131 °F
Sound Performance - Standard
Note	-	-	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Sound Performance - Suppression
Note	-	-	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	-	-	17 ft
Ground to Top of ROPS	-	-	-	18.3 ft
Ground to Top of Hood	-	-	-	13.1 ft
Ground to Center of Front Axle	-	-	-	4.3 ft
Ground to Bumper Clearance	-	-	-	3.8 ft
Ground to Lower Hitch Clearance	-	-	-	2.2 ft
Reach - Maximum Lift	-	-	-	8.2 ft
Clearance at Maximum Lift	-	-	-	15.2 ft
B-Pin Height - Maximum Lift	-	-	-	22.8 ft
Maximum Overall Height - Bucket Raised	-	-	-	30.8 ft
Rear Axle - Centerline to Bumper	-	-	-	13.5 ft
Tread Width	-	-	-	10.83 ft
Rack Back Angle - Maximum Lift	-	-	-	56.9 degrees
Dump Angle at Maximum Lift	-	-	-	-49.5 degrees
Rack Back Angle - Ground Level	-	-	-	40.2 degrees
Width - Over Tires - With Bulge	-	-	-	14.74 ft
Rack Back Angle - Carry	-	-	-	48.9 degrees
Wheel Base	-	-	-	19.3 ft
Maximum Overall Length	-	-	-	50.8 ft
Front Axle Centerline to Bucket Tip	-	-	-	18 ft
Dimensions - High Lift - Approximate
Tread Width	-	-	-	10.83 ft
Rack Back Angle - Ground Level	-	-	-	42.5 degrees
Dump Angle at Maximum Lift	-	-	-	-48.1 degrees
Rack Back Angle - Maximum Lift	-	-	-	56.2 degrees
Width - Over Tires - With Bulge	-	-	-	14.75 ft
Rack Back Angle - Carry	-	-	-	51.6 degrees
Ground to Top of Exhaust Stacks	-	-	-	17 ft
Ground to Top of ROPS	-	-	-	18.3 ft
Ground to Top of Hood	-	-	-	13.1 ft
Ground to Center of Front Axle	-	-	-	4.3 ft
Ground to Bumper Clearance	-	-	-	3.8 ft
Ground to Lower Hitch Clearance	-	-	-	2.2 ft
Reach - Maximum Lift	-	-	-	7.6 ft
Clearance at Maximum Lift	-	-	-	17.2 ft
B-Pin Height - Maximum Lift	-	-	-	24.5 ft
Maximum Overall Height - Bucket Raised	-	-	-	32 ft
Rear Axle - Centerline to Bumper	-	-	-	13.5 ft
Wheel Base	-	-	-	19.3 ft
Maximum Overall Length	-	-	-	51.6 ft
Front Axle Centerline to Bucket Tip	-	-	-	18.8 ft

Compare Equipment Go Back

988 Wheel Loader

950 GC Wheel Loader | Front Loader

986 Wheel Loader

992 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV

Hydraulic Cycle Times

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us