Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	950 GC Wheel Loader \| Front Loader View Product Remove	988 XE Wheel Loader View Product Remove	990 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	580 hp	752 hp
Engine Model	Cat® C18	Cat C7.1	Cat® C18	Cat® C27
Rated Speed	1700/rpm	-	1,700 rpm	1800 r/min
Peak Power Speed	1500/rpm	-	1,500 rpm	-
Gross Power - SAE J1995:2014	588 hp	-	588 hp	766 hp
Net Power - SAE J1349:2011	538 hp	-	538 hp	-
Bore	5.7 in	4.13 in	5.7 in	5.4 in
Stroke	7.2 in	5.31 in	7.2 in	6 in
Displacement	1105 in³	428 in³	1105 in³	1649.5 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	2230 lbf·ft	2624 lb/ft
Torque Rise	58 %	-	58%	18 %
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-
Net Power - ISO 9249	-	225 hp	-	-
Emissions	-	Tier 4/Stage V	-	Option 2 - Emits equivalent to U.S. EPA Tier 2
Note	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	228 hp	-	-
Maximum Power - 1,700 rpm - ISO 14396	-	240 hp	-	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	243 hp	-	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	811 ft·lbf	-	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	805 ft·lbf	-	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	225 hp	-	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	225 hp	-	-
Maximum Power - 1,700 rpm - SAE J1995	-	241 hp	-	-
Net Power - SAE J1349:2011 - Standard Ambient	-	-	-	699 hp
Net Power - SAE J1349:2011 - High Ambient	-	-	-	648 hp
Operating Specifications
Operating Weight	112574 lb	-	116362 lb	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	4.7-13 m3 (6.2-17 yd3)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Rated Payload - Quarry Face	12.5 t	-	12.5 t	-
Rated Payload - Loose Material	16 t	-	16 t	-
Cat Truck Match - Standard	770 - 772	-	-	773-775
Cat Truck Match - High Lift	773 - 775	-	-	775-777
Operating Weight - Standard	-	-	-	178517 lb
Rated Payload - Standard	-	-	-	17.5 ton (US)
Rated Payload - High Lift	-	-	-	17.5 ton (US)
Transmission
Transmission Type	Cat planetary powershift	-	Cat switched reluctance electric drive	Cat planetary power shift
Forward - 1	4 mile/h	4.5 mile/h	-	4.6 mile/h
Forward - 2	7.2 mile/h	8 mile/h	-	8.2 mile/h
Forward - 3	12.7 mile/h	14.2 mile/h	-	14.5 mile/h
Forward - 4	21.6 mile/h	22.4 mile/h	-	-
Reverse - 1	4.7 mile/h	4.5 mile/h	-	5.1 mile/h
Reverse - 2	8.3 mile/h	8 mile/h	-	9.1 mile/h
Reverse - 3	14.4 mile/h	14.2 mile/h	-	16 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	Lock-up disabled
Direct Drive - Forward 2	7.8 mile/h	-	-	8.2 mile/h
Direct Drive - Forward 3	13.9 mile/h	-	-	14.5 mile/h
Direct Drive - Forward 4	24.4 mile/h	-	-	-
Direct Drive - Reverse 1	5 mile/h	-	-	5.1 mile/h
Direct Drive - Reverse 2	8.9 mile/h	-	-	9.1 mile/h
Direct Drive - Reverse 3	15.8 mile/h	-	-	16 mile/h
Note	-	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Forward 1 (virtual)	-	-	4.3 mile/h	-
Forward 2 (virtual)	-	-	7 mile/h	-
Forward 3 (virtual)	-	-	13.8 mile/h	-
Forward 4 (virtual)	-	-	20 mile/h	-
Reverse 1 (virtual)	-	-	4.3 mile/h	-
Reverse 2 (virtual)	-	-	7 mile/h	-
Reverse 3 (virtual)	-	-	17.5 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	EH-Positive Flow Control, Flow Sharing	Positive flow control
Lift/Tilt System - Pump	Variable displacement piston	-	Variable displacement piston	-
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	4757 psi	4786 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System	Variable displacement piston	-	-	Open loop and pressure reducing
Relief Valve Setting - Main	551 psi	-	-	-
Maximum Flow at 1,400-1,600 rpm	-	-	153 gpm	-
Lift Cylinder - Bore	-	-	8.7 in	-
Lift Cylinder - Stroke	-	-	41.3 in	-
Tilt Cylinder - Bore	-	-	8.7 in	-
Tilt Cylinder - Stroke	-	-	27 in	-
Lift/Tilt System	-	-	-	Variable displacement piston
Maximum Flow at 1,800 rpm	-	-	-	240 gpm
Pilot Relief Setting	-	-	-	507 psi
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-
Raise	8 s	-	-	-
Dump	2.2 s	-	-	-
Lower Float Down	3.5 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, load sensing	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	-	Piston, variable displacement	Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	71.3 gpm	-
Relief Valve Setting - Steering	4351 psi	-	-	5004 psi
Total Steering Angle	86 °	-	86°	70°
Steering Cycle Times - High Idle	3.4 s	-	3.4 s	-
Steering Cycle Times - Low Idle	5.6 s	-	5.6 s	-
Steering Cut Off Pressure	-	-	4351 psi	-
Maximum Flow at 1,400 rpm	-	-	-	96.2 gpm
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
Axles
Front	Fixed	-	Fixed	Fixed
Rear	Trunnion	-	Trunnion	Trunnion
Oscillation Angle	13 °	-	13°	8.5°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450: 2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	72 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	109 dB(A)	116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	109 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	*Sound suppression equipped
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	110 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Service Refill Capacities
Fuel Tank	188 gal (US)	-	147 gal (US)	281 gal (US)
Cooling System	31.7 gal (US)	13.2 gal (US)	-	54.9 gal (US)
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-
Crankcase	15.9 gal (US)	4.8 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-
Transmission	24.3 gal (US)	11.9 gal (US)	16 gal (US)	29.1 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	10.6 gal (US)	49 gal (US)	71.6 gal (US)
Differential - Final Drives - Rear	49.1 gal (US)	10 gal (US)	49 gal (US)	68.9 gal (US)
Hydraulic System Factory Fill	125.5 gal (US)	-	-	210 gal (US)
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
DEF Tank	-	4.2 gal (US)	-	-
Fuel Tank Size	-	76.6 gal (US)	-	-
Hydraulic Tank	-	29.6 gal (US)	-	-
Cooling System - Jacket Water	-	-	30 gal (US)	-
Cooling Systems - Power Train	-	-	8 gal (US)	-
Engine Crankcase	-	-	16 gal (US)	20 gal (US)
Diesel Exhaust Fluid Tank	-	-	8.7 gal (US)	-
Hydraulic System - Implement/Steering	-	-	126 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	68.9 gal (US)
Hydraulic Tank - Steering and Braking	-	-	-	34.9 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	17.2 ft
Ground to Top of Exhaust Stacks	14.8 ft	-	-	16.6 ft
Ground to Top of Hood	10.9 ft	-	-	12.7 ft
Rear Axle - Centerline to Bumper	10.5 ft	-	-	12.5 ft
Front Axle Centerline to Bucket Tip	14 ft	-	-	15.4 ft
Wheel Base	14.9 ft	-	-	15.1 ft
Maximum Overall Length	39.3 ft	-	-	42.9 ft
Ground to Lower Hitch Clearance	1.9 ft	-	-	2 ft
Clearance at Maximum Lift	11.9 ft	-	-	7.2 ft
B-Pin Height - Maximum Lift	18 ft	-	-	19.7 ft
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	27.2 ft
Reach - Maximum Lift	6.5 ft	-	-	7.2 ft
Ground to Bumper Clearance	-	-	-	3.5 ft
Ground to Center of Front Axle	-	-	-	4.2 ft
Rack Back Angle at Ground Level	-	-	-	40.4°
Rack Back Angle at Carry	-	-	-	48.8°
Rack Angle at Maximum Lift	-	-	-	63.7°
Dump Angle at Maximum Lift	-	-	-	45°
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	17.2 ft
Ground to Top of Exhaust Stacks	14.8 ft	-	-	16.6 ft
Ground to Top of Hood	10.9 ft	-	-	12.7 ft
Rear Axle - Centerline to Bumper	10.5 ft	-	-	12.5 ft
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	17.8 ft
Wheel Base	14.9 ft	-	-	15.1 ft
Maximum Overall Length	40.7 ft	-	-	45.3 ft
Ground to Lower Hitch Clearance	1.9 ft	-	-	2 ft
Clearance at Maximum Lift	13.3 ft	-	-	14.8 ft
B-Pin Height - Maximum Lift	19.3 ft	-	-	21.2 ft
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	28.7 ft
Reach - Maximum Lift	6.8 ft	-	-	8.5 ft
Ground to Bumper Clearance	-	-	-	3.5 ft
Ground to Center of Front Axle	-	-	-	4.2 ft
Rack Back Angle at Ground Level	-	-	-	39.9°
Rack Back Angle at Carry	-	-	-	49.3°
Rack Angle at Maximum Lift	-	-	-	60.6°
Dump Angle at Maximum Lift	-	-	-	51°
Note	-	-	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Weights
Operating Weight	-	41554 lb	-	-
Buckets
Bucket Capacities	-	2.9-4.4 m³ (3.75-5.75 yd³)	-	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	76 dB(A)*	-	-
Note (1)	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	73 dB(A)	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	For machines in European Union countries and in countries that adopt the EU Directives	-	-
With Cooling Fan Speed at Maximum Value - Note	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	107 LWA***	-	-
Note (3)	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-
Note (2)	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	73 dB(A)	-	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	109 dB(A)	-	-
Dimensions
Rack Back - Ground	-	40 degrees	-	-
Height - Top of Exhaust Pipe	-	11.17 ft	-	-
Centerline of Rear Axle to Hitch	-	5.42 ft	-	-
Lift Arm Clearance	-	12 ft	-	-
B-Pin Height	-	13.75 ft	-	-
Centerline of Rear Axle to Edge of Counterweight	-	6.75 ft	-	-
Ground Clearance	-	1.5 ft	-	-
Rack Back - Maximum Lift	-	60 degrees	-	-
Height - Top of Hood	-	8.75 ft	-	-
Wheel Base	-	10.83 ft	-	-
Height - Top of ROPS	-	11.33 ft	-	-
Rack Back - Carry	-	45 degrees	-	-
Note	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-	-
Weights and Operating Specifications
Note (2)	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-
Tipping Load - Full Turn - Rigid Tires**	-	25875 lb	-	-
Breakout Force	-	34638 lbf	-	-
Tipping Load - Full Turn - ISO 14397-1*	-	24264 lb	-	-
Note (3)	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-	-
Operating Weight	-	41554 lb	-	-
Note (1)	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-	-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	9.4 s	-	-
Steering System - Pump Type	-	Piston	-	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	4047 psi	-	-
Implement System - Maximum Pump Output at 2,390 rpm	-	68 gpm	-	-
Engine - Tier 4 Final/Stage IV
Emissions	-	Tier 4/Stage IV	-	-
Hydraulic Cycle Times
Rack Back	-	-	4.5 s	4.3 s
Raise	-	-	8 s	8.6 s
Dump	-	-	2.2 s	2.9 s
Lower Float Down	-	-	3.5 s	3.7 s
Total Hydraulic Cycle Time	-	-	18.2 s	-
Lower	-	-	-	3.7 s
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	13.8 s
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	13.8 ft	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	-
Ground to Top of Hood	-	-	10.9 ft	-
Ground to Bumper Clearance	-	-	3.1 ft	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-
Front Axle Centerline to Bucket Tip	-	-	14 ft	-
Wheel Base	-	-	14.9 ft	-
Maximum Overall Length	-	-	39.3 ft	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-
Ground to Center of Axles	-	-	3.2 ft	-
Clearance at Maximum Lift	-	-	11.9 ft	-
B-Pin Height - Maximum Lift	-	-	18 ft	-
Maximum Overall Height - Bucket Raised	-	-	24.5 ft	-
Reach - Maximum Lift	-	-	6.5 ft	-
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	13.8 ft	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	-
Ground to Top of Hood	-	-	10.9 ft	-
Ground to Bumper Clearance	-	-	3.1 ft	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-
Front Axle Centerline to Bucket Tip	-	-	15.3 ft	-
Wheel Base	-	-	14.9 ft	-
Maximum Overall Length	-	-	40.7 ft	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-
Ground to Center of Axles	-	-	3.2 ft	-
Clearance at Maximum Lift	-	-	13.3 ft	-
B-Pin Height - Maximum Lift	-	-	19.3 ft	-
Maximum Overall Height - Bucket Raised	-	-	25.8 ft	-
Reach - Maximum Lift	-	-	6.8 ft	-
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	13.8 ft	-
Ground to Top of Exhaust Stacks	-	-	13.8 ft	-
Ground to Top of Hood	-	-	10.9 ft	-
Ground to Bumper Clearance	-	-	3.1 ft	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-
Front Axle Centerline to Fork Tip	-	-	16.5 ft	-
Wheel Base	-	-	14.9 ft	-
Maximum Overall Length	-	-	41.9 ft	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-
Ground to Center of Front Axle	-	-	3.2 ft	-
Fork Height with Level Arms	-	-	8.1 ft	-
Fork Top Clamp Opening	-	-	13.1 ft	-
Fork Height at Maximum Lift	-	-	17.2 ft	-
Hinge Pin Height at Maximum Lift	-	-	16.1 ft	-
Dump Angle at Maximum Lift	-	-	-39.4 °	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	114 dB(A)
Note (1)	-	-	-	*Sound suppression equipped
Note (2)	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Compare Equipment Go Back

988 Wheel Loader

950 GC Wheel Loader | Front Loader

988 XE Wheel Loader

990 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV

Hydraulic Cycle Times

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Sound Performance - Tier 2

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us