Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	914 Compact Wheel Loader View Product Remove	910 Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove	990 Wheel Loader View Product Remove	950 GC Wheel Loader \| Front Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	449 hp	752 hp	-
Engine Model	Cat® C18	Cat C3.6	Cat C3.6	Cat® C15	Cat® C27	Cat C7.1
Rated Speed	1700/rpm	-	-	2000	1800 r/min	-
Peak Power Speed	1500/rpm	-	-	1600	-	-
Gross Power - SAE J1995:2014	588 hp	-	-	456 hp	766 hp	-
Net Power - SAE J1349:2011	538 hp	-	-	373 hp	-	-
Bore	5.7 in	3.85 in	3.85 in	5.4 in	5.4 in	4.13 in
Stroke	7.2 in	4.72 in	4.72 in	6.75 in	6 in	5.31 in
Displacement	1105 in³	220 in³	220 in³	927 in²	1649.5 in³	428 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	-	2624 lb/ft	-
Torque Rise	58 %	-	-	16%	18 %	-
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-
Maximum Gross Power	-	110 hp	110 hp	-	-	-
Rated Net Power - Rated Engine Speed	-	2200 r/min	2200 r/min	-	-	-
Maximum Gross Power - Rated Engine Speed	-	1800 r/min	1800 r/min	-	-	-
Rated Net Power - SAE J1349	-	99 hp	99 hp	-	-	-
Maximum Gross Power - ISO 14396 (metric)	-	112 hp	112 hp	-	-	-
Rated Net Power - ISO 9249	-	98 hp	98 hp	-	-	-
Maximum Gross Torque - SAE J1995	-	335 ft·lbf	335 ft·lbf	-	-	-
Maximum Gross Torque - ISO 14396	-	332 ft·lbf	332 ft·lbf	-	-	-
Maximum Net Torque - SAE J1349	-	329 ft·lbf	329 ft·lbf	-	-	-
Maximum Net Torque - ISO 9249	-	327 ft·lbf	327 ft·lbf	-	-	-
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	Engine meets Tier 4 Final/Stage V emission standards.	-	Option 2 - Emits equivalent to U.S. EPA Tier 2	Tier 4/Stage V
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
Maximum Gross Power - ISO 14396	-	110 hp	110 hp	-	-	-
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	373 hp	-	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	373 hp	-	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	1778 lb/ft	-	-
Net Power - SAE J1349:2011 - Standard Ambient	-	-	-	-	699 hp	-
Net Power - SAE J1349:2011 - High Ambient	-	-	-	-	648 hp	-
Net Power - ISO 9249	-	-	-	-	-	225 hp
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	-	-	-	-	228 hp
Maximum Power - 1,700 rpm - ISO 14396	-	-	-	-	-	240 hp
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	-	-	-	-	243 hp
Peak Gross Torque - 1,400 rpm - SAE J1995	-	-	-	-	-	811 ft·lbf
Peak Gross Torque - 1,400 rpm - ISO 14396	-	-	-	-	-	805 ft·lbf
Maximum Net Power - 1,700 rpm - ISO 9249	-	-	-	-	-	225 hp
Maximum Net Power - 1,700 rpm - SAE J1349	-	-	-	-	-	225 hp
Maximum Power - 1,700 rpm - SAE J1995	-	-	-	-	-	241 hp
Operating Specifications
Operating Weight	112574 lb	-	-	-	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	-	5.0-10.3 m³ (6.5-13.5 yd³)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	-
Rated Payload - Quarry Face	12.5 t	-	-	-	-	-
Rated Payload - Loose Material	16 t	-	-	-	-	-
Cat Truck Match - Standard	770 - 772	-	-	770/735/740/745	773-775	-
Cat Truck Match - High Lift	773 - 775	-	-	772/773	775-777	-
Operating Weight - Standard	-	-	-	97785 lb	178517 lb	-
Operating Weight - High Lift	-	-	-	104005 lb	-	-
Rated Payload - Standard (Quarry Face)	-	-	-	11 ton (US)	-	-
Rated Payload - Loose Material (Standard)	-	-	-	14 ton (US)	-	-
Rated Payload - High Lift (Quarry Face)	-	-	-	11 ton (US)	-	-
Rated Payload - Loose Material (High Lift)	-	-	-	12.1 ton (US)	-	-
Rated Payload - Standard	-	-	-	-	17.5 ton (US)	-
Rated Payload - High Lift	-	-	-	-	17.5 ton (US)	-
Transmission
Transmission Type	Cat planetary powershift	-	-	Cat planetary power shift	Cat planetary power shift	-
Forward - 1	4 mile/h	-	-	5 mile/h	4.6 mile/h	4.5 mile/h
Forward - 2	7.2 mile/h	-	-	8 mile/h	8.2 mile/h	8 mile/h
Forward - 3	12.7 mile/h	-	-	-	14.5 mile/h	14.2 mile/h
Forward - 4	21.6 mile/h	-	-	-	-	22.4 mile/h
Reverse - 1	4.7 mile/h	-	-	5 mile/h	5.1 mile/h	4.5 mile/h
Reverse - 2	8.3 mile/h	-	-	8 mile/h	9.1 mile/h	8 mile/h
Reverse - 3	14.4 mile/h	-	-	-	16 mile/h	14.2 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	-	Lock-up disabled	-
Direct Drive - Forward 2	7.8 mile/h	-	-	8 mile/h	8.2 mile/h	-
Direct Drive - Forward 3	13.9 mile/h	-	-	14 mile/h	14.5 mile/h	-
Direct Drive - Forward 4	24.4 mile/h	-	-	24 mile/h	-	-
Direct Drive - Reverse 1	5 mile/h	-	-	-	5.1 mile/h	-
Direct Drive - Reverse 2	8.9 mile/h	-	-	9 mile/h	9.1 mile/h	-
Direct Drive - Reverse 3	15.8 mile/h	-	-	16 mile/h	16 mile/h	-
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
Forward and Reverse - Speed Range 3	-	25 mile/h	25 mile/h	-	-	-
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	6.3 mile/h	-	-	-
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	12.5 mile/h	-	-	-
Direct Drive - Reverse 4	-	-	-	25.4 mile/h	-	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	-	Load Sense	Positive flow control	-
Lift/Tilt System - Pump	Variable displacement piston	-	-	2 × 110 cc variable displacement	-	-
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	-	4050 psi	4786 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)	-
Pilot System	Variable displacement piston	-	-	-	Open loop and pressure reducing	-
Relief Valve Setting - Main	551 psi	-	-	-	-	-
Maximum Flow at 2,165 rpm	-	-	-	123 gpm	-	-
Lift Cylinder - Bore	-	-	-	7.5 in	-	-
Lift Cylinder - Stroke	-	-	-	45 in	-	-
Tilt Cylinder - Bore	-	-	-	6.7 in	-	-
Tilt Cylinder - Stroke	-	-	-	28.4 in	-	-
Lift/Tilt System	-	-	-	-	Variable displacement piston	-
Maximum Flow at 1,800 rpm	-	-	-	-	240 gpm	-
Pilot Relief Setting	-	-	-	-	507 psi	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-	-	-
Raise	8 s	-	-	-	-	-
Dump	2.2 s	-	-	-	-	-
Lower Float Down	3.5 s	-	-	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	-	Load Sense	Pilot, load sensing	-
Steering System - Pump	Piston, variable displacement	-	-	Piston, variable displacement	Piston, variable displacement	-
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-	-	-
Relief Valve Setting - Steering	4351 psi	-	-	-	5004 psi	-
Total Steering Angle	86 °	-	-	70°	70°	-
Steering Cycle Times - High Idle	3.4 s	-	-	-	-	-
Steering Cycle Times - Low Idle	5.6 s	-	-	-	-	-
Maximum Flow at 1,400 rpm	-	-	-	52 gpm	96.2 gpm	-
Steering Cut Off Pressure	-	-	-	4000 psi	-	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-
Axles
Front	Fixed	Fixed; Locking differential (standard)	Fixed; Locking differential (standard)	Fixed	Fixed	-
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion	Trunnion	-
Oscillation Angle	13 °	-	-	±12.5°	8.5°	-
Oscillation Angle - Chain Arrangement	-	-	-	±8.5°	-	-
Brakes
Brakes	ISO 3450:2011	-	-	ISO 3450:2011	ISO 3450: 2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	73 dB(A)	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	-	113 dB(A)	116 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	*Sound suppression equipped	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	-	114 dB(A)	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	74 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	-	113 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	188 gal (US)	43.6 gal (US)	43.6 gal (US)	141 gal (US)	281 gal (US)	-
Cooling System	31.7 gal (US)	5.7 gal (US)	5.7 gal (US)	-	54.9 gal (US)	13.2 gal (US)
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-	-	-
Crankcase	15.9 gal (US)	-	-	9 gal (US)	-	4.8 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-	-	-
Transmission	24.3 gal (US)	0.8 gal (US)	0.8 gal (US)	20 gal (US)	29.1 gal (US)	11.9 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	-	-	-	71.6 gal (US)	10.6 gal (US)
Differential - Final Drives - Rear	49.1 gal (US)	-	-	-	68.9 gal (US)	10 gal (US)
Hydraulic System Factory Fill	125.5 gal (US)	-	-	87 gal (US)	210 gal (US)	-
Hydraulic System - Tank Only	63.4 gal (US)	-	-	34 gal (US)	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	-
Axles - Rear Center Differential	-	2 gal (US)	2 gal (US)	-	-	-
Hydraulic System - Including Tank	-	25.9 gal (US)	25.9 gal (US)	-	-	-
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	4.8 gal (US)	-	-	-
Engine Crankcase	-	2.6 gal (US)	2.6 gal (US)	-	20 gal (US)	-
Hydraulic Tank	-	14.5 gal (US)	14.5 gal (US)	-	-	29.6 gal (US)
Axles - Front Center Differential	-	2 gal (US)	2 gal (US)	-	-	-
Fuel Tank - Short Lift	-	-	-	127 gal (US)	-	-
Cooling Systems	-	-	-	26 gal (US)	-	-
Diesel Exhaust Fluid Tank	-	-	-	6 gal (US)	-	-
Axle Oil - Differentials and Final Drives - Front	-	-	-	49 gal (US)	-	-
Axle Oil - Differentials and Final Drives - Rear	-	-	-	45 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	-	68.9 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	-	-	34.9 gal (US)	-
DEF Tank	-	-	-	-	-	4.2 gal (US)
Fuel Tank Size	-	-	-	-	-	76.6 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	13.5 ft	17.2 ft	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	13.3 ft	16.6 ft	-
Ground to Top of Hood	10.9 ft	-	-	10.7 ft	12.7 ft	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	10.3 ft	12.5 ft	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	13.8 ft	15.4 ft	-
Wheel Base	14.9 ft	-	-	12.5 ft	15.1 ft	-
Maximum Overall Length	39.3 ft	-	-	36.6 ft	42.9 ft	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	1.5 ft	2 ft	-
Clearance at Maximum Lift	11.9 ft	-	-	10.1 ft	7.2 ft	-
B-Pin Height - Maximum Lift	18 ft	-	-	16.1 ft	19.7 ft	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	22.4 ft	27.2 ft	-
Reach - Maximum Lift	6.5 ft	-	-	7.1 ft	7.2 ft	-
Ground to Center of Front Axle	-	-	-	3.2 ft	4.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-	-
Note	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-
Ground to Bumper Clearance	-	-	-	-	3.5 ft	-
Rack Back Angle at Ground Level	-	-	-	-	40.4°	-
Rack Back Angle at Carry	-	-	-	-	48.8°	-
Rack Angle at Maximum Lift	-	-	-	-	63.7°	-
Dump Angle at Maximum Lift	-	-	-	-	45°	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	13.5 ft	17.2 ft	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	13.3 ft	16.6 ft	-
Ground to Top of Hood	10.9 ft	-	-	10.7 ft	12.7 ft	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	10.3 ft	12.5 ft	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	15.3 ft	17.8 ft	-
Wheel Base	14.9 ft	-	-	12.5 ft	15.1 ft	-
Maximum Overall Length	40.7 ft	-	-	38 ft	45.3 ft	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	1.5 ft	2 ft	-
Clearance at Maximum Lift	13.3 ft	-	-	11.6 ft	14.8 ft	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	17.6 ft	21.2 ft	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	23.9 ft	28.7 ft	-
Reach - Maximum Lift	6.8 ft	-	-	7.4 ft	8.5 ft	-
Ground to Center of Front Axle	-	-	-	3.2 ft	4.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-	-
Note	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-
Ground to Bumper Clearance	-	-	-	-	3.5 ft	-
Rack Back Angle at Ground Level	-	-	-	-	39.9°	-
Rack Back Angle at Carry	-	-	-	-	49.3°	-
Rack Angle at Maximum Lift	-	-	-	-	60.6°	-
Dump Angle at Maximum Lift	-	-	-	-	51°	-
Weights
Operating Weight	-	19103 lb	18102 lb	-	-	41554 lb
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	1.3-3.5 m3 (1.7-4.6 yd3)	-	-	2.9-4.4 m³ (3.75-5.75 yd³)
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	1.3-1.9 m³ (1.7-2.5 yd³)	-	-	-
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	2.5-3.5 m³ (3.3-4.6 yd³)	-	-	-
Sustainability
Recyclability	-	95%	95%	-	-	-
Cab
ROPS	-	ISO 3471:2008	ISO 3471:2008	-	-	-
FOPS	-	ISO 3449:2005	ISO 3449:2005	-	-	-
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	*The measurements were conducted with the cab doors and windows closed.	-	-	-
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-	-
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-	-
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-	-
Steering
Maximum Flow - Steering Pump	-	22 gpm	17 gpm	-	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.75 turns	3.75 turns	-	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	2.8 s	3.2 s	-	-	-
Maximum Working Pressure - Steering Pump	-	3263 psi	2683 psi	-	-	-
Steering Articulation Angle - Each Direction	-	40 °	40 °	-	-	-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	3046 psi	3046 psi	-	-	-
Maximum Flow - Implement Pump	-	39 gpm	32 gpm	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	24 gpm	-	-	-	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	3046 psi	3046 psi	-	-	-
Hydraulic Cycle Time - Total Cycle Time	-	12.5 s	12.5 s	-	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	5.2 s	5.2 s	-	-	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	24 gpm	24 gpm	-	-	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.4 s	1.4 s	-	-	-
Relief Pressure - Tilt Cylinder	-	4931 psi	4931 psi	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	32 gpm	-	-	-	-
Maximum Working Pressure - Implement Pump	-	4061 psi	3408 psi	-	-	-
Hydraulic Cycle Time - Rackback	-	2.2 s	2.2 s	-	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	3.7 s	3.7 s	-	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	-	-	24 gpm	-	-	-
Tires
Other Choices Include	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow	-	-	-
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	Other tire choices are available. Contact your Cat dealer for details.	-	-	-
Standard Size	-	17.5 R25 L2 XTLA	15.5 R25 L2 XTLA	-	-	-
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-	-
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-	-
Hydraulic Cycle Times
Rack Back	-	-	-	4.5 s	4.3 s	-
Raise	-	-	-	9 s	8.6 s	-
Dump	-	-	-	3.5 s	2.9 s	-
Lower	-	-	-	5.2 s	3.7 s	-
Lower Float Down	-	-	-	4.3 s	3.7 s	-
Total Hydraulic Cycle Time	-	-	-	21.3 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	-	13.8 s	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	13.5 ft	-	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-	-
Ground to Top of Hood	-	-	-	10.7 ft	-	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-	-
Reach at Maximum Lift	-	-	-	8 ft	-	-
Clearance at Maximum Lift	-	-	-	10.7 ft	-	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-	-
Maximum Overall Height, Bucket Raised	-	-	-	20.9 ft	-	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-	-
Wheel Base	-	-	-	12.5 ft	-	-
Maximum Overall Length	-	-	-	35 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	-	12.2 ft	-	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	13.5 ft	-	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-	-
Ground to Top of Hood	-	-	-	10.7 ft	-	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-	-
Wheel Base	-	-	-	12.5 ft	-	-
Maximum Overall Length	-	-	-	35.4 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	-	12.6 ft	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)	-	-	-	-	116 dB(A)	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	-	72 dB(A)	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	-	114 dB(A)	-
Note (1)	-	-	-	-	*Sound suppression equipped	-
Note (2)	-	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (3)	-	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (4)	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	-	-	-	-	76 dB(A)*
Note (1)	-	-	-	-	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	-	-	-	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	-	-	-	-	73 dB(A)
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	-	-	-	-	For machines in European Union countries and in countries that adopt the EU Directives
With Cooling Fan Speed at Maximum Value - Note	-	-	-	-	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	-	-	-	-	107 LWA***
Note (3)	-	-	-	-	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Note (2)	-	-	-	-	-	**For machines in European Union countries and in countries that adopt the "EU Directives."
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	-	-	73 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	-	-	-	-	109 dB(A)
Dimensions
Rack Back - Ground	-	-	-	-	-	40 degrees
Height - Top of Exhaust Pipe	-	-	-	-	-	11.17 ft
Centerline of Rear Axle to Hitch	-	-	-	-	-	5.42 ft
Lift Arm Clearance	-	-	-	-	-	12 ft
B-Pin Height	-	-	-	-	-	13.75 ft
Centerline of Rear Axle to Edge of Counterweight	-	-	-	-	-	6.75 ft
Ground Clearance	-	-	-	-	-	1.5 ft
Rack Back - Maximum Lift	-	-	-	-	-	60 degrees
Height - Top of Hood	-	-	-	-	-	8.75 ft
Wheel Base	-	-	-	-	-	10.83 ft
Height - Top of ROPS	-	-	-	-	-	11.33 ft
Rack Back - Carry	-	-	-	-	-	45 degrees
Note	-	-	-	-	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
Weights and Operating Specifications
Note (2)	-	-	-	-	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Tipping Load - Full Turn - Rigid Tires**	-	-	-	-	-	25875 lb
Breakout Force	-	-	-	-	-	34638 lbf
Tipping Load - Full Turn - ISO 14397-1*	-	-	-	-	-	24264 lb
Note (3)	-	-	-	-	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Operating Weight	-	-	-	-	-	41554 lb
Note (1)	-	-	-	-	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	-	-	-	-	9.4 s
Steering System - Pump Type	-	-	-	-	-	Piston
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	-	-	-	-	4047 psi
Implement System - Maximum Pump Output at 2,390 rpm	-	-	-	-	-	68 gpm
Engine - Tier 4 Final/Stage IV
Emissions	-	-	-	-	-	Tier 4/Stage IV

Compare Equipment Go Back

988 Wheel Loader

914 Compact Wheel Loader

910 Compact Wheel Loader

986 Wheel Loader

990 Wheel Loader

950 GC Wheel Loader | Front Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Hydraulic Cycle Times

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Sound Performance - Tier 2

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV