CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 Wheel Loader
    View Product
    914 Compact Wheel Loader
    View Product Remove
    903D Compact Wheel Loader
    View Product Remove
    990 Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove
    950 GC Wheel Loader | Front Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 580 hp - - 752 hp - -
    Engine Model Cat® C18 Cat C3.6 Cat C2.4* Cat® C27 Cat® C15 Cat C7.1
    Rated Speed 1700/rpm - - 1800 r/min 2000 rpm -
    Peak Power Speed 1500/rpm - - - 1600 rpm -
    Gross Power - SAE J1995:2014 588 hp - - 766 hp 456 hp -
    Net Power - SAE J1349:2011 538 hp - - - 448 hp -
    Bore 5.7 in 3.85 in 3.4 in 5.4 in 5.4 in 4.13 in
    Stroke 7.2 in 4.72 in 4 in 6 in 6.75 in 5.31 in
    Displacement 1105 in³ 220 in³ 147 in² 1649.5 in³ 927 in³ 428 in³
    Peak Torque - 1,200 rpm 2104 lbf·ft - - 2624 lb/ft - -
    Torque Rise 58 % - - 18 % 16% -
    Note (1) Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio - - - Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. -
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. - - - Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. -
    Maximum Gross Power - 110 hp 42 hp - - -
    Rated Net Power - Rated Engine Speed - 2200 r/min - - - -
    Maximum Gross Power - Rated Engine Speed - 1800 r/min - - - -
    Rated Net Power - SAE J1349 - 99 hp - - - -
    Maximum Gross Power - ISO 14396 (metric) - 112 hp - - - -
    Rated Net Power - ISO 9249 - 98 hp - - - -
    Maximum Gross Torque - SAE J1995 - 335 ft·lbf - - - -
    Maximum Gross Torque - ISO 14396 - 332 ft·lbf - - - -
    Maximum Net Torque - SAE J1349 - 329 ft·lbf - - - -
    Maximum Net Torque - ISO 9249 - 327 ft·lbf - - - -
    Emissions - Engine meets Tier 4 Final/Stage V emission standards. - Option 2 - Emits equivalent to U.S. EPA Tier 2 - Tier 4/Stage V
    Note - Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. *Engine meets U.S. EPA Tier 4 Final emission standards. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
    Maximum Gross Power - ISO 14396 - 110 hp - - - -
    Gross Power - - 42 hp - - -
    Net Power - 2,200 rpm - SAE J1349 R-ing - - 40 hp - - -
    Net Power - 2,200 rpm - ISO 9249 R-ing - - 40 hp - - -
    Net Power - SAE J1349:2011 - Standard Ambient - - - 699 hp - -
    Net Power - SAE J1349:2011 - High Ambient - - - 648 hp - -
    Peak Torque (1,200 rpm) - SAE J1995:2014 - - - - 1778 lbf·ft -
    Note (3) - - - - Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions. -
    Net Power - ISO 9249 - - - - - 225 hp
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric - - - - - 228 hp
    Maximum Power - 1,700 rpm - ISO 14396 - - - - - 240 hp
    Maximum Power - 1,700 rpm - ISO 14396 - Metric - - - - - 243 hp
    Peak Gross Torque - 1,400 rpm - SAE J1995 - - - - - 811 ft·lbf
    Peak Gross Torque - 1,400 rpm - ISO 14396 - - - - - 805 ft·lbf
    Maximum Net Power - 1,700 rpm - ISO 9249 - - - - - 225 hp
    Maximum Net Power - 1,700 rpm - SAE J1349 - - - - - 225 hp
    Maximum Power - 1,700 rpm - SAE J1995 - - - - - 241 hp

    Operating Specifications
    Operating Weight 112574 lb - - - 112426 lb -
    Bucket Capacity Range 4.7-13 m3 (6.2-17 yd3) - - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 6.4-7.6 m3 (8.3-10 yd3) -
    Rated Payload - Quarry Face 12.5 t - - - 12.5 ton (US) -
    Rated Payload - Loose Material 16 t - - - - -
    Cat Truck Match - Standard 770 - 772 - - 773-775 - -
    Cat Truck Match - High Lift 773 - 775 - - 775-777 772/773/775 -
    Operating Weight - Standard - - - 178517 lb - -
    Rated Payload - Standard - - - 17.5 ton (US) - -
    Rated Payload - High Lift - - - 17.5 ton (US) - -

    Transmission
    Transmission Type Cat planetary powershift - - Cat planetary power shift Cat planetary power shift -
    Forward - 1 4 mile/h - - 4.6 mile/h 5 mile/h 4.5 mile/h
    Forward - 2 7.2 mile/h - - 8.2 mile/h 8 mile/h 8 mile/h
    Forward - 3 12.7 mile/h - - 14.5 mile/h - 14.2 mile/h
    Forward - 4 21.6 mile/h - - - - 22.4 mile/h
    Reverse - 1 4.7 mile/h - - 5.1 mile/h 5 mile/h 4.5 mile/h
    Reverse - 2 8.3 mile/h - - 9.1 mile/h 8 mile/h 8 mile/h
    Reverse - 3 14.4 mile/h - - 16 mile/h - 14.2 mile/h
    Direct Drive - Forward 1 Lock-up disabled - - Lock-up disabled Lock-up disabled -
    Direct Drive - Forward 2 7.8 mile/h - - 8.2 mile/h 8 mile/h -
    Direct Drive - Forward 3 13.9 mile/h - - 14.5 mile/h 14 mile/h -
    Direct Drive - Forward 4 24.4 mile/h - - - 24 mile/h -
    Direct Drive - Reverse 1 5 mile/h - - 5.1 mile/h Lock-up disabled -
    Direct Drive - Reverse 2 8.9 mile/h - - 9.1 mile/h 9 mile/h -
    Direct Drive - Reverse 3 15.8 mile/h - - 16 mile/h 16 mile/h -
    Note - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. Travel speeds based on 35/65-R33 tires. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
    Forward and Reverse - Speed Range 3 - 25 mile/h - - - -
    Forward and Reverse - Speed Range 1* - 6.3 mile/h - - - -
    Forward and Reverse - Speed Range 2* - 12.5 mile/h - - - -
    Travel Speed - - 12.4 mile/h - - -
    Direct Drive - Reverse 4 - - - - 25.4 mile/h -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH- Positive Flow Control, Flow Sharing - - Positive flow control EH - Load Sense -
    Lift/Tilt System - Pump Variable displacement piston - - - Variable displacement piston -
    Maximum Flow at 1,400-1,860 rpm 153 gpm - - - - -
    Relief Valve Setting - Lift/Tilt 4757 psi - - 4786 psi 4598 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 210 mm × 1050 mm (8.7 in × 41.3 in) - - 235 mm × 1287 mm (9.3 in × 50.7 in) 190 mm x 1216 mm (7.5 in x 48 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke 266 mm × 685 mm (8.7 in × 27 in) - - 292.1 mm × 820 mm (11.5 in × 32.3 in) 170 mm x 722 mm (6.7 in x 28.4 in) -
    Pilot System Variable displacement piston - - Open loop and pressure reducing Variable displacement piston -
    Relief Valve Setting - Main 551 psi - - - - -
    Lift/Tilt System - - - Variable displacement piston - -
    Maximum Flow at 1,800 rpm - - - 240 gpm - -
    Pilot Relief Setting - - - 507 psi - -
    Maximum Flow at 2,165 rpm - - - - 159 gal/min -
    Relief Valve Setting - - - - 500 psi -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back 4.5 s - - - - -
    Raise 8 s - - - - -
    Dump 2.2 s - - - - -
    Lower Float Down 3.5 s - - - - -
    Total Hydraulic Cycle Time - Empty Bucket 18.2 s - - - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - - Pilot, load sensing Pilot, load sensing -
    Steering System - Pump Piston, variable displacement - - Piston, variable displacement Piston, variable displacement -
    Maximum Flow at 1,400-1,600 rpm 71.3 gpm - - - - -
    Relief Valve Setting - Steering 4351 psi - - 5004 psi 4000 psi -
    Total Steering Angle 86 ° - - 70° 70° -
    Steering Cycle Times - High Idle 3.4 s - - - 3 s -
    Steering Cycle Times - Low Idle 5.6 s - - - 5.2 s -
    Maximum Flow at 1,400 rpm - - - 96.2 gpm - -
    Maximum Flow at 2,165 rpm - - - - 52 gal/min -

    Air Conditioning System
    Air Conditioning • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system - - • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co -

    Axles
    Front Fixed Fixed; Locking differential (standard) - Fixed Fixed -
    Rear Trunnion Oscillating ±11 degrees; Locking differential (Standard) - Trunnion Trunnion -
    Oscillation Angle 13 ° - - 8.5° +/-12.5° -

    Brakes
    Brakes ISO 3450:2011 - - ISO 3450: 2011 ISO 3450:2011 -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - - - Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - 72 dB(A) 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) 111 dB(A) - - 116 dB(A) 113 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - 72 dB(A) 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - - - 110 dB(A) -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - *Sound suppression equipped * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Machine Sound Power Level (ISO 6395:2008)* - - - 114 dB(A) - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - - 74 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) 112 dB(A) - - - 113 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - - - 110 dB(A) -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - - - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - - - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Service Refill Capacities
    Fuel Tank 188 gal (US) 43.6 gal (US) 11.4 gal (US) 281 gal (US) 141 gal (US) -
    Cooling System 31.7 gal (US) 5.7 gal (US) 3 gal (US) 54.9 gal (US) 27 gal (US) 13.2 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) 33 gal (US) - - - - -
    Crankcase 15.9 gal (US) - - - - 4.8 gal (US)
    Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) 8.7 gal (US) - - - - -
    Transmission 24.3 gal (US) 0.8 gal (US) - 29.1 gal (US) 20 gal (US) 11.9 gal (US)
    Transmission - Validated by Test Cell Fill Quantities 29 gal (US) - - - - -
    Differential - Final Drives - Front 49.1 gal (US) - - 71.6 gal (US) 49 gal (US) 10.6 gal (US)
    Differential - Final Drives - Rear 49.1 gal (US) - - 68.9 gal (US) 45 gal (US) 10 gal (US)
    Hydraulic System Factory Fill 125.5 gal (US) - - 210 gal (US) 94 gal (US) -
    Hydraulic System - Tank Only 63.4 gal (US) - - - - -
    Note • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: - 20% biodiesel FAME (fatty acid methyl ester) *** - 10 -
    Axles - Rear Center Differential - 2 gal (US) - - - -
    Hydraulic System - Including Tank - 25.9 gal (US) - - - -
    Diesel Exhaust Fluid (DEF) Tank - 4.8 gal (US) - - - -
    Engine Crankcase - 2.6 gal (US) - 20 gal (US) 9 gal (US) -
    Hydraulic Tank - 14.5 gal (US) - - - 29.6 gal (US)
    Axles - Front Center Differential - 2 gal (US) - - - -
    Hydraulic System - - 6.3 gal (US) - - -
    Engine Oil - - 2.4 gal (US) - - -
    Hydraulic Tank - Implement and Hydraulic Fan - - - 68.9 gal (US) - -
    Hydraulic Tank - Steering and Braking - - - 34.9 gal (US) - -
    Diesel Exhaust Fluid Tank - - - - 5.5 gal (US) -
    DEF Tank - - - - - 4.2 gal (US)
    Fuel Tank Size - - - - - 76.6 gal (US)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS 13.8 ft - - 17.2 ft - -
    Ground to Top of Exhaust Stacks 14.8 ft - - 16.6 ft - -
    Ground to Top of Hood 10.9 ft - - 12.7 ft - -
    Rear Axle - Centerline to Bumper 10.5 ft - - 12.5 ft - -
    Front Axle Centerline to Bucket Tip 14 ft - - 15.4 ft - -
    Wheel Base 14.9 ft - - 15.1 ft - -
    Maximum Overall Length 39.3 ft - - 42.9 ft - -
    Ground to Lower Hitch Clearance 1.9 ft - - 2 ft - -
    Clearance at Maximum Lift 11.9 ft - - 7.2 ft - -
    B-Pin Height - Maximum Lift 18 ft - - 19.7 ft - -
    Maximum Overall Height - Bucket Raised 24.5 ft - - 27.2 ft - -
    Reach - Maximum Lift 6.5 ft - - 7.2 ft - -
    Ground to Bumper Clearance - - - 3.5 ft - -
    Ground to Center of Front Axle - - - 4.2 ft - -
    Rack Back Angle at Ground Level - - - 40.4° - -
    Rack Back Angle at Carry - - - 48.8° - -
    Rack Angle at Maximum Lift - - - 63.7° - -
    Dump Angle at Maximum Lift - - - 45° - -
    Note - - - Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. - -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS 13.8 ft - - 17.2 ft - -
    Ground to Top of Exhaust Stacks 14.8 ft - - 16.6 ft - -
    Ground to Top of Hood 10.9 ft - - 12.7 ft - -
    Rear Axle - Centerline to Bumper 10.5 ft - - 12.5 ft - -
    Front Axle Centerline to Bucket Tip 15.3 ft - - 17.8 ft - -
    Wheel Base 14.9 ft - - 15.1 ft - -
    Maximum Overall Length 40.7 ft - - 45.3 ft - -
    Ground to Lower Hitch Clearance 1.9 ft - - 2 ft - -
    Clearance at Maximum Lift 13.3 ft - - 14.8 ft - -
    B-Pin Height - Maximum Lift 19.3 ft - - 21.2 ft - -
    Maximum Overall Height - Bucket Raised 25.8 ft - - 28.7 ft - -
    Reach - Maximum Lift 6.8 ft - - 8.5 ft - -
    Ground to Bumper Clearance - - - 3.5 ft - -
    Ground to Center of Front Axle - - - 4.2 ft - -
    Rack Back Angle at Ground Level - - - 39.9° - -
    Rack Back Angle at Carry - - - 49.3° - -
    Rack Angle at Maximum Lift - - - 60.6° - -
    Dump Angle at Maximum Lift - - - 51° - -
    Note - - - Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires. - -

    Weights
    Operating Weight - 19103 lb 9414 lb - - 41554 lb

    Buckets
    Bucket Capacities - 1.3-3.5 m3 (1.7-4.6 yd3) 0.6-1.0 m3 (0.8-1.3 yd3) - - 2.9-4.4 m³ (3.75-5.75 yd³)
    Bucket Capacities - General Purpose - 1.3-1.9 m³ (1.7-2.5 yd³) 0.6 m3 (0.8 yd3) - - -
    Bucket Capacities - Light Material - 2.5-3.5 m³ (3.3-4.6 yd³) 1.0 m3 (1.3 yd3) - - -

    Sustainability
    Recyclability - 95% 97% - - -

    Cab
    ROPS - ISO 3471:2008 ISO 3471:2008 - - -
    FOPS - ISO 3449:2005 ISO 3449:2005 Level I - - -
    Note (4) - *The measurements were conducted with the cab doors and windows closed. - - - -
    Note (2) - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - - - -
    Note (3) - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - - - -
    Note (1) - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - - - -

    Steering
    Maximum Flow - Steering Pump - 22 gpm - - - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.75 turns - - - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - 2.8 s - - - -
    Maximum Working Pressure - Steering Pump - 3263 psi - - - -
    Steering Articulation Angle - Each Direction - 40 ° - - - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure - 3046 psi - - - -
    Maximum Flow - Implement Pump - 39 gpm - - - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard - 24 gpm - - - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure - 3046 psi - - - -
    Hydraulic Cycle Time - Total Cycle Time - 12.5 s - - - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - 5.2 s - - - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow - 24 gpm - - - -
    Hydraulic Cycle Time - Dump, at Maximum Reach - 1.4 s - - - -
    Relief Pressure - Tilt Cylinder - 4931 psi - - - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High - 32 gpm - - - -
    Maximum Working Pressure - Implement Pump - 4061 psi - - - -
    Hydraulic Cycle Time - Rackback - 2.2 s - - - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - 3.7 s - - - -
    Hydraulic Cycle Time - Lift - - 4.4 s - - -
    Hydraulic Cycle Time - Dump - - 0.7 s - - -

    Tires
    Other Choices Include - 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - - - -
    Note (1) - Other tire choices are available. Contact your Cat dealer for details. - - - -
    Standard Size - 17.5 R25 L2 XTLA - - - -
    Note (3) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - - - -
    Note (2) - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - - - -

    Hydraulic System
    Main Relief - - 3481 psi - - -
    3rd Auxiliary Flow - - 14 gpm - - -
    Hydraulic Cycle Time - Lower, Float - - 2.4 s - - -
    Hydraulic Cycle Time - Total Cycle Time - - - - - 9.4 s
    Steering System - Pump Type - - - - - Piston
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) - - - - - 4047 psi
    Implement System - Maximum Pump Output at 2,390 rpm - - - - - 68 gpm

    Dimensions (Approximate) - Standard Lift
    Cab Height - - 8.25 ft - - -
    Ground Clearance - - 10 in - - -
    Wheel Base - - 6.42 ft - - -
    Overall Length - With Bucket* - - 15.75 ft - - -
    Reach at Maximum Dump Height* - - 2.33 ft - - -
    Dig Depth - - 6 in - - -
    Maximum Dump Height* - - 7.5 ft - - -
    Load Over Height - - 9.17 ft - - -
    Hinge Pin at Maximum Height - - 10.08 ft - - -
    Departure Angle - Degrees - - 30° - - -
    Overall Length - With Forks - - 17.08 ft - - -
    Reach - Ground Level - - 2.67 ft - - -
    Maximum Reach - - 4.5 ft - - -
    Fork Depth Above Ground - - 2 in - - -
    Fork Height at Maximum Reach - - 4.67 ft - - -
    Maximum Fork Height - - 9.83 ft - - -
    Fork Reach at Maximum Height - - 2 ft - - -
    Turning Radius - Over Bucket* - - 13.17 ft - - -
    Turning Radius - Inside Tire** - - 5.92 ft - - -
    Width - Over Bucket* - - 5.83 ft - - -
    Tire Gauge - - 4.33 ft - - -
    Machine Width** - - 5.58 ft - - -
    Articulation Angle - - 40° - - -
    Steering Angle - - 80° - - -
    Dump Angle at Maximum Height - - 40° - - -
    Note (1) - - *Vary with bucket size. - - -
    Note (2) - - **Vary with tire size. - - -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - - -

    Dimensions (Approximate) - High Lift
    Cab Height - - 8.25 ft - - -
    Ground Clearance - - 10 in - - -
    Wheel Base - - 6.42 ft - 12.5 ft -
    Overall Length - With Bucket* - - 16.17 ft - - -
    Reach at Maximum Dump Height* - - 2.42 ft - - -
    Dig Depth - - 8 in - - -
    Maximum Dump Height* - - 8 ft - - -
    Load Over Height - - 9.67 ft - - -
    Hinge Pin at Maximum Height - - 10.58 ft - - -
    Departure Angle - Degrees - - 30° - - -
    Overall Length - With Forks - - 17.58 ft - - -
    Reach - Ground Level - - 3.25 ft - - -
    Maximum Reach - - 4.92 ft - - -
    Fork Depth Above Ground - - 2 in - - -
    Fork Height at Maximum Reach - - 4.67 ft - - -
    Maximum Fork Height - - 10.33 ft - - -
    Fork Reach at Maximum Height - - 2 ft - - -
    Turning Radius - Over Bucket* - - 13.42 ft - - -
    Turning Radius - Inside Tire** - - 5.92 ft - - -
    Width - Over Bucket* - - 5.83 ft - - -
    Tire Gauge - - 4.33 ft - - -
    Machine Width** - - 5.58 ft - - -
    Articulation Angle - - 40° - - -
    Steering Angle - - 80° - - -
    Dump Angle at Maximum Height - - 40° - - -
    Note (1) - - *Vary with bucket size. - - -
    Note (2) - - **Vary with tire size. - - -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - - -
    Ground to Top of ROPS - - - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - - - 13.3 ft -
    Ground to Top of Hood - - - - 10.7 ft -
    Ground to Fuel Tank Clearance - - - - 2.2 ft -
    Rear Axle - Centerline to Bumper - - - - 10.3 ft -
    Front Axle Centerline to Bucket Tip - - - - 16.7 ft -
    Maximum Overall Length - - - - 39.5 ft -
    Ground to Lower Hitch Clearance - - - - 1.5 ft -
    Ground to Center of Front Axle - - - - 3.2 ft -
    Clearance at Maximum Lift (45° Dump) - - - - 12 ft -
    B-Pin Height - Maximum Lift - - - - 18.7 ft -
    Maximum Overall Height - Bucket Raised - - - - 25 ft -
    Reach at Maximum Lift (45° Dump) - - - - 7.7 ft -
    Note - - - - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. -

    Operating Specifications - Standard Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR - - -
    Rated Bucket Capacity - - 0.8 yd³ - - -
    Breakout Force - - 6160 lbf - - -
    Operating Weight - - 9414 lb - - -
    Rated Operating Load at Full Turn - Bucket*** - - 2701 lb - - -
    Straight Tipping Load - Bucket*** - - 6415 lb - - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5401 lb - - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5512 lb - - -
    Rack Back - Transport Position - - 51° - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3366 lb - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2524 lb - - -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - - -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - - -
    Note (3) - - ***Manual quick coupler, precleaner hood. - - -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - - -

    Operating Specifications - High Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR - - -
    Rated Bucket Capacity - - 0.8 yd³ - - -
    Breakout Force - - 6204 lbf - - -
    Operating Weight - - 9462 lb - - -
    Rated Operating Load at Full Turn - Bucket*** - - 2502 lb - - -
    Straight Tipping Load - Bucket*** - - 5975 lb - - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5004 lb - - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5115 lb - - -
    Rack Back - Transport Position - - 51° - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3148 lb - - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2361 lb - - -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - - -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - - -
    Note (3) - - ***Manual quick coupler, precleaner hood. - - -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - - -

    Maximum Material Densities - General Purpose
    Bucket Type - - General Purpose - - -
    Rated Capacity - - 0.8 yd³ - - -
    Dump Height - - 90 in - - -
    Maximum Material Density - - 3169 lb/yd³ - - -
    Bucket Width - - 70 in - - -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - - -

    Maximum Material Densities - Light Material
    Bucket Type - - Light Material - - -
    Rated Capacity - - 1.3 yd³ - - -
    Dump Height - - 85 in - - -
    Maximum Material Density - - 1989 lb/yd³ - - -
    Bucket Width - - 74 in - - -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - - -

    Hydraulic Cycle Times
    Rack Back - - - 4.3 s 3.8 s -
    Raise - - - 8.6 s 7.5 s -
    Dump - - - 2.9 s 3 s -
    Lower - - - 3.7 s - -
    Lower Float Down - - - 3.7 s 4.6 s -
    Total Hydraulic Cycle Time - Empty Bucket - - - 13.8 s 18.9 s -

    Sound Performance - Tier 2
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008) - - - 116 dB(A) - -
    Operator Sound Pressure Level (ISO 6396:2008)* - - - 72 dB(A) - -
    Machine Sound Power Level (ISO 6395:2008)* - - - 114 dB(A) - -
    Note (1) - - - *Sound suppression equipped - -
    Note (2) - - - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (3) - - - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (4) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) - - - - - 76 dB(A)*
    Note (1) - - - - - *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) - - - - - European Union Directive "2000/14/EC" as amended by "2005/88/EC."
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** - - - - - 73 dB(A)
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) - - - - - For machines in European Union countries and in countries that adopt the EU Directives
    With Cooling Fan Speed at Maximum Value - Note - - - - - Distance of 15 m (49.2 ft), moving forward in second gear ratio.
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** - - - - - 107 LWA***
    Note (3) - - - - - ***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
    Note (2) - - - - - **For machines in European Union countries and in countries that adopt the "EU Directives."
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - - - - 73 dB(A)
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) - - - - - 109 dB(A)

    Dimensions
    Rack Back - Ground - - - - - 40 degrees
    Height - Top of Exhaust Pipe - - - - - 11.17 ft
    Centerline of Rear Axle to Hitch - - - - - 5.42 ft
    Lift Arm Clearance - - - - - 12 ft
    B-Pin Height - - - - - 13.75 ft
    Centerline of Rear Axle to Edge of Counterweight - - - - - 6.75 ft
    Ground Clearance - - - - - 1.5 ft
    Rack Back - Maximum Lift - - - - - 60 degrees
    Height - Top of Hood - - - - - 8.75 ft
    Wheel Base - - - - - 10.83 ft
    Height - Top of ROPS - - - - - 11.33 ft
    Rack Back - Carry - - - - - 45 degrees
    Note - - - - - All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.

    Weights and Operating Specifications
    Note (2) - - - - - *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Tipping Load - Full Turn - Rigid Tires** - - - - - 25875 lb
    Breakout Force - - - - - 34638 lbf
    Tipping Load - Full Turn - ISO 14397-1* - - - - - 24264 lb
    Note (3) - - - - - **Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
    Operating Weight - - - - - 41554 lb
    Note (1) - - - - - For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound

    Engine - Tier 4 Final/Stage IV
    Emissions - - - - - Tier 4/Stage IV
    Add a Similar Product: