Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	903D Compact Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove	950 GC Wheel Loader \| Front Loader View Product Remove	995 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	580 hp	-	-
Engine Model	Cat® C18	Cat C2.4*	Cat® C18	Cat C7.1	Cat® 3516E
Rated Speed	1700/rpm	-	1,700 rpm	-	-
Peak Power Speed	1500/rpm	-	1,500 rpm	-	-
Gross Power - SAE J1995:2014	588 hp	-	588 hp	-	1870 hp
Net Power - SAE J1349:2011	538 hp	-	538 hp	-	-
Bore	5.7 in	3.4 in	5.7 in	4.13 in	6.7 in
Stroke	7.2 in	4 in	7.2 in	5.31 in	8.5 in
Displacement	1105 in³	147 in²	1105 in³	428 in³	4766 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	2230 lbf·ft	-	-
Torque Rise	58 %	-	58%	-	39%
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	The power ratings apply when tested under the reference conditions for the specified standard.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Maximum Gross Power	-	42 hp	-	-	-
Gross Power	-	42 hp	-	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	40 hp	-	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	40 hp	-	-	-
Note	-	*Engine meets U.S. EPA Tier 4 Final emission standards.	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	-
Net Power - ISO 9249	-	-	-	225 hp	-
Emissions	-	-	-	Tier 4/Stage V	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	-	-	228 hp	-
Maximum Power - 1,700 rpm - ISO 14396	-	-	-	240 hp	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	-	-	243 hp	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	-	-	811 ft·lbf	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	-	-	805 ft·lbf	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	-	-	225 hp	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	-	-	225 hp	-
Maximum Power - 1,700 rpm - SAE J1995	-	-	-	241 hp	-
Engine Power - ISO 14396	-	-	-	-	1847 hp
Net Power - SAE J1349 - Standard Ambient	-	-	-	-	1739 hp
Net Power - SAE J1349 - High Ambient	-	-	-	-	1696 hp
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	-	8549 lb/ft
Note (3)	-	-	-	-	The gross power advertised is with the fan at maximum speed.
Operating Specifications
Operating Weight	112574 lb	-	116362 lb	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	4.7-13 m3 (6.2-17 yd3)	-	17.2-43.6 m3 (22.3-57 yd3)
Rated Payload - Quarry Face	12.5 t	-	12.5 t	-	-
Rated Payload - Loose Material	16 t	-	16 t	-	-
Cat Truck Match - Standard	770 - 772	-	-	-	785/789
Cat Truck Match - High Lift	773 - 775	-	-	-	789/793/794
Operating Weight - Standard	-	-	-	-	543772 lb
Operating Weight - High Lift	-	-	-	-	547675 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	-	-	60 ton (US)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	-	-	50 ton (US)
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	-	-	55 ton (US)
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	-	-	50 ton (US)
Note	-	-	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Transmission
Transmission Type	Cat planetary powershift	-	Cat switched reluctance electric drive	-	Cat Planetary Power Shift
Forward - 1	4 mile/h	-	-	4.5 mile/h	4.6 mile/h
Forward - 2	7.2 mile/h	-	-	8 mile/h	8 mile/h
Forward - 3	12.7 mile/h	-	-	14.2 mile/h	13.6 mile/h
Forward - 4	21.6 mile/h	-	-	22.4 mile/h	-
Reverse - 1	4.7 mile/h	-	-	4.5 mile/h	5 mile/h
Reverse - 2	8.3 mile/h	-	-	8 mile/h	8.8 mile/h
Reverse - 3	14.4 mile/h	-	-	14.2 mile/h	14.9 mile/h
Direct Drive - Forward 1	Lock-up disabled	-	-	-	Lock-up disables
Direct Drive - Forward 2	7.8 mile/h	-	-	-	8.7 mile/h
Direct Drive - Forward 3	13.9 mile/h	-	-	-	15.2 mile/h
Direct Drive - Forward 4	24.4 mile/h	-	-	-	-
Direct Drive - Reverse 1	5 mile/h	-	-	-	Lock-up disables
Direct Drive - Reverse 2	8.9 mile/h	-	-	-	9.6 mile/h
Direct Drive - Reverse 3	15.8 mile/h	-	-	-	16.8 mile/h
Travel Speed	-	12.4 mile/h	-	-	-
Forward 1 (virtual)	-	-	4.3 mile/h	-	-
Forward 2 (virtual)	-	-	7 mile/h	-	-
Forward 3 (virtual)	-	-	13.8 mile/h	-	-
Forward 4 (virtual)	-	-	20 mile/h	-	-
Reverse 1 (virtual)	-	-	4.3 mile/h	-	-
Reverse 2 (virtual)	-	-	7 mile/h	-	-
Reverse 3 (virtual)	-	-	17.5 mile/h	-	-
Note	-	-	-	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	Travel speeds based on 58/85-57 tires.
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	-	EH-Positive Flow Control, Flow Sharing	-	Positive Flow Control
Lift/Tilt System - Pump	Variable displacement piston	-	Variable displacement piston	-	Variable Displacement Piston
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	4757 psi	-	5004 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	-	-	-	370 × 1713 mm (14.6 × 67.4 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	-	-	-	310 × 1086 mm (12.2 × 42.8 in)
Pilot System	Variable displacement piston	-	-	-	Open Loop and Pressure Reducing
Relief Valve Setting - Main	551 psi	-	-	-	-
Maximum Flow at 1,400-1,600 rpm	-	-	153 gpm	-	-
Lift Cylinder - Bore	-	-	8.7 in	-	-
Lift Cylinder - Stroke	-	-	41.3 in	-	-
Tilt Cylinder - Bore	-	-	8.7 in	-	-
Tilt Cylinder - Stroke	-	-	27 in	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	-	-	541 gpm
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-	-
Raise	8 s	-	-	-	-
Dump	2.2 s	-	-	-	-
Lower Float Down	3.5 s	-	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, load sensing	-	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	-	Piston, variable displacement	-	Piston, Variable Displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	71.3 gpm	-	-
Relief Valve Setting - Steering	4351 psi	-	-	-	-
Total Steering Angle	86 °	-	86°	-	80 degrees
Steering Cycle Times - High Idle	3.4 s	-	3.4 s	-	4.3 s
Steering Cycle Times - Low Idle	5.6 s	-	5.6 s	-	7.6 s
Steering Cut Off Pressure	-	-	4351 psi	-	-
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-
Axles
Front	Fixed	-	Fixed	-	Fixed
Rear	Trunnion	-	Trunnion	-	Trunnion
Oscillation Angle	13 °	-	13°	-	9°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	109 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	109 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	110 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	188 gal (US)	11.4 gal (US)	147 gal (US)	-	-
Cooling System	31.7 gal (US)	3 gal (US)	-	13.2 gal (US)	-
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-	-
Crankcase	15.9 gal (US)	-	-	4.8 gal (US)	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-	-
Transmission	24.3 gal (US)	-	16 gal (US)	11.9 gal (US)	-
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	-	49 gal (US)	10.6 gal (US)	-
Differential - Final Drives - Rear	49.1 gal (US)	-	49 gal (US)	10 gal (US)	-
Hydraulic System Factory Fill	125.5 gal (US)	-	-	-	-
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	-	-
Hydraulic System	-	6.3 gal (US)	-	-	-
Engine Oil	-	2.4 gal (US)	-	-	-
Cooling System - Jacket Water	-	-	30 gal (US)	-	-
Cooling Systems - Power Train	-	-	8 gal (US)	-	-
Engine Crankcase	-	-	16 gal (US)	-	-
Diesel Exhaust Fluid Tank	-	-	8.7 gal (US)	-	-
Hydraulic System - Implement/Steering	-	-	126 gal (US)	-	-
DEF Tank	-	-	-	4.2 gal (US)	-
Fuel Tank Size	-	-	-	76.6 gal (US)	-
Hydraulic Tank	-	-	-	29.6 gal (US)	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	39.3 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-	-
Wheel Base	14.9 ft	-	-	-	-
Maximum Overall Length	40.7 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-	-
Weights
Operating Weight	-	9414 lb	-	41554 lb	-
Buckets
Bucket Capacities	-	0.6-1.0 m3 (0.8-1.3 yd3)	-	2.9-4.4 m³ (3.75-5.75 yd³)	-
Bucket Capacities - General Purpose	-	0.6 m3 (0.8 yd3)	-	-	-
Bucket Capacities - Light Material	-	1.0 m3 (1.3 yd3)	-	-	-
Hydraulic System
Main Relief	-	3481 psi	-	-	-
3rd Auxiliary Flow	-	14 gpm	-	-	-
Hydraulic Cycle Time - Lower, Float	-	2.4 s	-	-	-
Hydraulic Cycle Time - Total Cycle Time	-	-	-	9.4 s	-
Steering System - Pump Type	-	-	-	Piston	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	-	-	4047 psi	-
Implement System - Maximum Pump Output at 2,390 rpm	-	-	-	68 gpm	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	-	4.4 s	-	-	-
Hydraulic Cycle Time - Dump	-	0.7 s	-	-	-
Cab
ROPS	-	ISO 3471:2008	-	-	-
FOPS	-	ISO 3449:2005 Level I	-	-	-
Dimensions (Approximate) - Standard Lift
Cab Height	-	8.25 ft	-	-	-
Ground Clearance	-	10 in	-	-	-
Wheel Base	-	6.42 ft	14.9 ft	-	-
Overall Length - With Bucket*	-	15.75 ft	-	-	-
Reach at Maximum Dump Height*	-	2.33 ft	-	-	-
Dig Depth	-	6 in	-	-	-
Maximum Dump Height*	-	7.5 ft	-	-	-
Load Over Height	-	9.17 ft	-	-	-
Hinge Pin at Maximum Height	-	10.08 ft	-	-	-
Departure Angle - Degrees	-	30°	-	-	-
Overall Length - With Forks	-	17.08 ft	-	-	-
Reach - Ground Level	-	2.67 ft	-	-	-
Maximum Reach	-	4.5 ft	-	-	-
Fork Depth Above Ground	-	2 in	-	-	-
Fork Height at Maximum Reach	-	4.67 ft	-	-	-
Maximum Fork Height	-	9.83 ft	-	-	-
Fork Reach at Maximum Height	-	2 ft	-	-	-
Turning Radius - Over Bucket*	-	13.17 ft	-	-	-
Turning Radius - Inside Tire**	-	5.92 ft	-	-	-
Width - Over Bucket*	-	5.83 ft	-	-	-
Tire Gauge	-	4.33 ft	-	-	-
Machine Width**	-	5.58 ft	-	-	-
Articulation Angle	-	40°	-	-	-
Steering Angle	-	80°	-	-	-
Dump Angle at Maximum Height	-	40°	-	-	-
Note (1)	-	*Vary with bucket size.	-	-	-
Note (2)	-	**Vary with tire size.	-	-	-
Note (3)	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Ground to Top of ROPS	-	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	-	-
Ground to Top of Hood	-	-	10.9 ft	-	-
Ground to Bumper Clearance	-	-	3.1 ft	-	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	14 ft	-	-
Maximum Overall Length	-	-	39.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-	-
Ground to Center of Axles	-	-	3.2 ft	-	-
Clearance at Maximum Lift	-	-	11.9 ft	-	-
B-Pin Height - Maximum Lift	-	-	18 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	24.5 ft	-	-
Reach - Maximum Lift	-	-	6.5 ft	-	-
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-
Dimensions (Approximate) - High Lift
Cab Height	-	8.25 ft	-	-	-
Ground Clearance	-	10 in	-	-	-
Wheel Base	-	6.42 ft	14.9 ft	-	-
Overall Length - With Bucket*	-	16.17 ft	-	-	-
Reach at Maximum Dump Height*	-	2.42 ft	-	-	-
Dig Depth	-	8 in	-	-	-
Maximum Dump Height*	-	8 ft	-	-	-
Load Over Height	-	9.67 ft	-	-	-
Hinge Pin at Maximum Height	-	10.58 ft	-	-	-
Departure Angle - Degrees	-	30°	-	-	-
Overall Length - With Forks	-	17.58 ft	-	-	-
Reach - Ground Level	-	3.25 ft	-	-	-
Maximum Reach	-	4.92 ft	-	-	-
Fork Depth Above Ground	-	2 in	-	-	-
Fork Height at Maximum Reach	-	4.67 ft	-	-	-
Maximum Fork Height	-	10.33 ft	-	-	-
Fork Reach at Maximum Height	-	2 ft	-	-	-
Turning Radius - Over Bucket*	-	13.42 ft	-	-	-
Turning Radius - Inside Tire**	-	5.92 ft	-	-	-
Width - Over Bucket*	-	5.83 ft	-	-	-
Tire Gauge	-	4.33 ft	-	-	-
Machine Width**	-	5.58 ft	-	-	-
Articulation Angle	-	40°	-	-	-
Steering Angle	-	80°	-	-	-
Dump Angle at Maximum Height	-	40°	-	-	-
Note (1)	-	*Vary with bucket size.	-	-	-
Note (2)	-	**Vary with tire size.	-	-	-
Note (3)	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-	-
Ground to Top of ROPS	-	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	14.8 ft	-	-
Ground to Top of Hood	-	-	10.9 ft	-	-
Ground to Bumper Clearance	-	-	3.1 ft	-	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	15.3 ft	-	-
Maximum Overall Length	-	-	40.7 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-	-
Ground to Center of Axles	-	-	3.2 ft	-	-
Clearance at Maximum Lift	-	-	13.3 ft	-	-
B-Pin Height - Maximum Lift	-	-	19.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	-	25.8 ft	-	-
Reach - Maximum Lift	-	-	6.8 ft	-	-
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-
Operating Specifications - Standard Lift
Tire Size	-	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	-	0.8 yd³	-	-	-
Breakout Force	-	6160 lbf	-	-	-
Operating Weight	-	9414 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	-	2701 lb	-	-	-
Straight Tipping Load - Bucket***	-	6415 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	5401 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	5512 lb	-	-	-
Rack Back - Transport Position	-	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	3366 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	2524 lb	-	-	-
Note (1)	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	-	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Operating Specifications - High Lift
Tire Size	-	33 × 15.5-16.5, 12 PR	-	-	-
Rated Bucket Capacity	-	0.8 yd³	-	-	-
Breakout Force	-	6204 lbf	-	-	-
Operating Weight	-	9462 lb	-	-	-
Rated Operating Load at Full Turn - Bucket***	-	2502 lb	-	-	-
Straight Tipping Load - Bucket***	-	5975 lb	-	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	5004 lb	-	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	5115 lb	-	-	-
Rack Back - Transport Position	-	51°	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	3148 lb	-	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	2361 lb	-	-	-
Note (1)	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-	-
Note (2)	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-	-
Note (3)	-	***Manual quick coupler, precleaner hood.	-	-	-
Note (4)	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-	-
Maximum Material Densities - General Purpose
Bucket Type	-	General Purpose	-	-	-
Rated Capacity	-	0.8 yd³	-	-	-
Dump Height	-	90 in	-	-	-
Maximum Material Density	-	3169 lb/yd³	-	-	-
Bucket Width	-	70 in	-	-	-
Note	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Maximum Material Densities - Light Material
Bucket Type	-	Light Material	-	-	-
Rated Capacity	-	1.3 yd³	-	-	-
Dump Height	-	85 in	-	-	-
Maximum Material Density	-	1989 lb/yd³	-	-	-
Bucket Width	-	74 in	-	-	-
Note	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-	-
Sustainability
Recyclability	-	97%	-	-	-
Hydraulic Cycle Times
Rack Back	-	-	4.5 s	-	4.9 s
Raise	-	-	8 s	-	12.6 s
Dump	-	-	2.2 s	-	3.1 s
Lower Float Down	-	-	3.5 s	-	4.2 s
Total Hydraulic Cycle Time	-	-	18.2 s	-	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	-	13.8 ft	-	-
Ground to Top of Hood	-	-	10.9 ft	-	-
Ground to Bumper Clearance	-	-	3.1 ft	-	-
Rear Axle - Centerline to Bumper	-	-	10.5 ft	-	-
Front Axle Centerline to Fork Tip	-	-	16.5 ft	-	-
Wheel Base	-	-	14.9 ft	-	-
Maximum Overall Length	-	-	41.9 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.9 ft	-	-
Ground to Center of Front Axle	-	-	3.2 ft	-	-
Fork Height with Level Arms	-	-	8.1 ft	-	-
Fork Top Clamp Opening	-	-	13.1 ft	-	-
Fork Height at Maximum Lift	-	-	17.2 ft	-	-
Hinge Pin Height at Maximum Lift	-	-	16.1 ft	-	-
Dump Angle at Maximum Lift	-	-	-39.4 °	-	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	-	-	76 dB(A)*	-
Note (1)	-	-	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	-	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	-	-	73 dB(A)	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	-	-	For machines in European Union countries and in countries that adopt the EU Directives	-
With Cooling Fan Speed at Maximum Value - Note	-	-	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	-	-	107 LWA***	-
Note (3)	-	-	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
Note (2)	-	-	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	73 dB(A)	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	-	-	109 dB(A)	-
Dimensions
Rack Back - Ground	-	-	-	40 degrees	-
Height - Top of Exhaust Pipe	-	-	-	11.17 ft	-
Centerline of Rear Axle to Hitch	-	-	-	5.42 ft	-
Lift Arm Clearance	-	-	-	12 ft	-
B-Pin Height	-	-	-	13.75 ft	-
Centerline of Rear Axle to Edge of Counterweight	-	-	-	6.75 ft	-
Ground Clearance	-	-	-	1.5 ft	-
Rack Back - Maximum Lift	-	-	-	60 degrees	-
Height - Top of Hood	-	-	-	8.75 ft	-
Wheel Base	-	-	-	10.83 ft	-
Height - Top of ROPS	-	-	-	11.33 ft	-
Rack Back - Carry	-	-	-	45 degrees	-
Note	-	-	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-
Weights and Operating Specifications
Note (2)	-	-	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-
Tipping Load - Full Turn - Rigid Tires**	-	-	-	25875 lb	-
Breakout Force	-	-	-	34638 lbf	-
Tipping Load - Full Turn - ISO 14397-1*	-	-	-	24264 lb	-
Note (3)	-	-	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-
Operating Weight	-	-	-	41554 lb	-
Note (1)	-	-	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-
Engine - Tier 4 Final/Stage IV
Emissions	-	-	-	Tier 4/Stage IV	-
Complete System Fill
Fuel Tank - Standard	-	-	-	-	856 gal (US)
Fuel Tank - With 24 hr Attachment	-	-	-	-	1414 gal (US)
Cooling System	-	-	-	-	138 gal (US)
Engine Crankcase	-	-	-	-	76 gal (US)
Transmission	-	-	-	-	110 gal (US)
Differential - Final Drives - Front	-	-	-	-	220 gal (US)
Differential - Final Drives - Rear	-	-	-	-	200 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	-	270 gal (US)
Hydraulic Tank - Steering and Braking	-	-	-	-	100 gal (US)
Oil Renewal System (ORS)*	-	-	-	-	20 gal (US)
Note	-	-	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	-	-	109.4 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	-	-	131 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	-	-	127.4 °F
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	-	74 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	-	119 dB(A)
Note	-	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	-	73 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	-	117 dB(A)
Note	-	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	-	28.8 ft
Clearance at Maximum Lift	-	-	-	-	19.8 ft
Dump Angle at Maximum Lift	-	-	-	-	–50.0 degrees
Front Axle Centerline to Bucket Tip	-	-	-	-	21.9 ft
Ground to Bumper Clearance	-	-	-	-	4.4 ft
Ground to Center of Axles	-	-	-	-	6 ft
Ground to Lower Hitch Clearance	-	-	-	-	2.9 ft
Ground to Top of Exhaust Stacks	-	-	-	-	23.2 ft
Ground to Top of Hood	-	-	-	-	18.6 ft
Ground to Top of ROPS	-	-	-	-	23.4 ft
Maximum Overall Height - Bucket Raised	-	-	-	-	39.3 ft
Maximum Overall Length	-	-	-	-	64.6 ft
Note	-	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	-	59.5 degrees
Rack Back Angle - Carry	-	-	-	-	47.7 degrees
Rack Back Angle - Ground Level	-	-	-	-	39.7 degrees
Reach - Maximum Lift	-	-	-	-	9.6 ft
Rear Axle - Centerline to Bumper	-	-	-	-	20.4 ft
Tread Width	-	-	-	-	14.1 ft
Wheel Base	-	-	-	-	22.3 ft
Width - Over Tires - With Bulge	-	-	-	-	18.8 ft
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	-	31.6 ft
Clearance at Maximum Lift	-	-	-	-	22.6 ft
Dump Angle at Maximum Lift	-	-	-	-	–50.0 degrees
Front Axle Centerline to Bucket Tip	-	-	-	-	24.2 ft
Ground to Bumper Clearance	-	-	-	-	4.4 ft
Ground to Center of Axles	-	-	-	-	6 ft
Ground to Lower Hitch Clearance	-	-	-	-	2.9 ft
Ground to Top of Exhaust Stacks	-	-	-	-	23.2 ft
Ground to Top of Hood	-	-	-	-	18.6 ft
Ground to Top of ROPS	-	-	-	-	23.4 ft
Maximum Overall Height - Bucket Raised	-	-	-	-	42.1 ft
Maximum Overall Length	-	-	-	-	66.9 ft
Note	-	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	-	59.4 degrees
Rack Back Angle - Carry	-	-	-	-	53.5 degrees
Rack Back Angle - Ground Level	-	-	-	-	45 degrees
Reach - Maximum Lift	-	-	-	-	9.4 ft
Rear Axle - Centerline to Bumper	-	-	-	-	20.4 ft
Tread Width	-	-	-	-	14.1 ft
Wheel Base	-	-	-	-	22.3 ft
Width - Over Tires - With Bulge	-	-	-	-	18.8 ft

Compare Equipment Go Back

988 Wheel Loader

903D Compact Wheel Loader

988 XE Wheel Loader

950 GC Wheel Loader | Front Loader

995 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Weights

Buckets

Hydraulic System

Loader Hydraulic System

Cab

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Hydraulic Cycle Times

Dimensions - Millyard Linkage

Sound

Dimensions

Weights and Operating Specifications

Engine - Tier 4 Final/Stage IV

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate