Compare

Compare Equipment Go Back

Engine
	988 Wheel Loader View Product	995 Wheel Loader View Product Remove	914 Compact Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	580 hp
Engine Model	Cat® C18	Cat® 3516E	Cat C3.6	Cat® C18
Rated Speed	1700/rpm	-	-	1,700 rpm
Peak Power Speed	1500/rpm	-	-	1,500 rpm
Gross Power - SAE J1995:2014	588 hp	1870 hp	-	588 hp
Net Power - SAE J1349:2011	538 hp	-	-	538 hp
Bore	5.7 in	6.7 in	3.85 in	5.7 in
Stroke	7.2 in	8.5 in	4.72 in	7.2 in
Displacement	1105 in³	4766 in³	220 in³	1105 in³
Peak Torque - 1,200 rpm	2104 lbf·ft	-	-	2230 lbf·ft
Torque Rise	58 %	39%	-	58%
Note (1)	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	The power ratings apply when tested under the reference conditions for the specified standard.	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.	-
Engine Power - ISO 14396	-	1847 hp	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-
Note (3)	-	The gross power advertised is with the fan at maximum speed.	-	-
Maximum Gross Power	-	-	110 hp	-
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	1800 r/min	-
Rated Net Power - SAE J1349	-	-	99 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	112 hp	-
Rated Net Power - ISO 9249	-	-	98 hp	-
Maximum Gross Torque - SAE J1995	-	-	335 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	332 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	329 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	327 ft·lbf	-
Note	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Maximum Gross Power - ISO 14396	-	-	110 hp	-
Operating Specifications
Operating Weight	112574 lb	-	-	116362 lb
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	17.2-43.6 m3 (22.3-57 yd3)	-	4.7-13 m3 (6.2-17 yd3)
Rated Payload - Quarry Face	12.5 t	-	-	12.5 t
Rated Payload - Loose Material	16 t	-	-	16 t
Cat Truck Match - Standard	770 - 772	785/789	-	-
Cat Truck Match - High Lift	773 - 775	789/793/794	-	-
Operating Weight - Standard	-	543772 lb	-	-
Operating Weight - High Lift	-	547675 lb	-	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-
Transmission
Transmission Type	Cat planetary powershift	Cat Planetary Power Shift	-	Cat switched reluctance electric drive
Forward - 1	4 mile/h	4.6 mile/h	-	-
Forward - 2	7.2 mile/h	8 mile/h	-	-
Forward - 3	12.7 mile/h	13.6 mile/h	-	-
Forward - 4	21.6 mile/h	-	-	-
Reverse - 1	4.7 mile/h	5 mile/h	-	-
Reverse - 2	8.3 mile/h	8.8 mile/h	-	-
Reverse - 3	14.4 mile/h	14.9 mile/h	-	-
Direct Drive - Forward 1	Lock-up disabled	Lock-up disables	-	-
Direct Drive - Forward 2	7.8 mile/h	8.7 mile/h	-	-
Direct Drive - Forward 3	13.9 mile/h	15.2 mile/h	-	-
Direct Drive - Forward 4	24.4 mile/h	-	-	-
Direct Drive - Reverse 1	5 mile/h	Lock-up disables	-	-
Direct Drive - Reverse 2	8.9 mile/h	9.6 mile/h	-	-
Direct Drive - Reverse 3	15.8 mile/h	16.8 mile/h	-	-
Note	-	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-
Forward and Reverse - Speed Range 3	-	-	25 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	-
Forward 1 (virtual)	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	17.5 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH- Positive Flow Control, Flow Sharing	Positive Flow Control	-	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	-	Variable displacement piston
Maximum Flow at 1,400-1,860 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	5004 psi	-	4757 psi
Cylinders, Double Acting - Lift, Bore and Stroke	210 mm × 1050 mm (8.7 in × 41.3 in)	370 × 1713 mm (14.6 × 67.4 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	266 mm × 685 mm (8.7 in × 27 in)	310 × 1086 mm (12.2 × 42.8 in)	-	-
Pilot System	Variable displacement piston	Open Loop and Pressure Reducing	-	-
Relief Valve Setting - Main	551 psi	-	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	153 gpm
Lift Cylinder - Bore	-	-	-	8.7 in
Lift Cylinder - Stroke	-	-	-	41.3 in
Tilt Cylinder - Bore	-	-	-	8.7 in
Tilt Cylinder - Stroke	-	-	-	27 in
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	4.5 s	-	-	-
Raise	8 s	-	-	-
Dump	2.2 s	-	-	-
Lower Float Down	3.5 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.2 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	-	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-	Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	71.3 gpm
Relief Valve Setting - Steering	4351 psi	-	-	-
Total Steering Angle	86 °	80 degrees	-	86°
Steering Cycle Times - High Idle	3.4 s	4.3 s	-	3.4 s
Steering Cycle Times - Low Idle	5.6 s	7.6 s	-	5.6 s
Steering Cut Off Pressure	-	-	-	4351 psi
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion
Oscillation Angle	13 °	9°	-	13°
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	111 dB(A)	-	-	109 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	109 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	112 dB(A)	-	-	110 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities
Fuel Tank	188 gal (US)	-	43.6 gal (US)	147 gal (US)
Cooling System	31.7 gal (US)	-	5.7 gal (US)	-
Coolant (Validated by Test Cell Fill Quantities)	33 gal (US)	-	-	-
Crankcase	15.9 gal (US)	-	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	8.7 gal (US)	-	-	-
Transmission	24.3 gal (US)	-	0.8 gal (US)	16 gal (US)
Transmission - Validated by Test Cell Fill Quantities	29 gal (US)	-	-	-
Differential - Final Drives - Front	49.1 gal (US)	-	-	49 gal (US)
Differential - Final Drives - Rear	49.1 gal (US)	-	-	49 gal (US)
Hydraulic System Factory Fill	125.5 gal (US)	-	-	-
Hydraulic System - Tank Only	63.4 gal (US)	-	-	-
Note	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%
Axles - Rear Center Differential	-	-	2 gal (US)	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	-
Engine Crankcase	-	-	2.6 gal (US)	16 gal (US)
Hydraulic Tank	-	-	14.5 gal (US)	-
Axles - Front Center Differential	-	-	2 gal (US)	-
Cooling System - Jacket Water	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	8 gal (US)
Diesel Exhaust Fluid Tank	-	-	-	8.7 gal (US)
Hydraulic System - Implement/Steering	-	-	-	126 gal (US)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	40.7 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-
Cooling System	-	138 gal (US)	-	-
Engine Crankcase	-	76 gal (US)	-	-
Transmission	-	110 gal (US)	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	-	-
Clearance at Maximum Lift	-	19.8 ft	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-
Ground to Top of Hood	-	18.6 ft	-	-
Ground to Top of ROPS	-	23.4 ft	-	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	-	-
Maximum Overall Length	-	64.6 ft	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-
Rack Back Angle - Carry	-	47.7 degrees	-	-
Rack Back Angle - Ground Level	-	39.7 degrees	-	-
Reach - Maximum Lift	-	9.6 ft	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-
Tread Width	-	14.1 ft	-	-
Wheel Base	-	22.3 ft	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	-	-
Clearance at Maximum Lift	-	22.6 ft	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-
Ground to Top of Hood	-	18.6 ft	-	-
Ground to Top of ROPS	-	23.4 ft	-	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	-	-
Maximum Overall Length	-	66.9 ft	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-
Rack Back Angle - Carry	-	53.5 degrees	-	-
Rack Back Angle - Ground Level	-	45 degrees	-	-
Reach - Maximum Lift	-	9.4 ft	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-
Tread Width	-	14.1 ft	-	-
Wheel Base	-	22.3 ft	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-
Hydraulic Cycle Times
Rack Back	-	4.9 s	-	4.5 s
Raise	-	12.6 s	-	8 s
Dump	-	3.1 s	-	2.2 s
Lower Float Down	-	4.2 s	-	3.5 s
Total Hydraulic Cycle Time	-	-	-	18.2 s
Weights
Operating Weight	-	-	19103 lb	-
Buckets
Bucket Capacities	-	-	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Sustainability
Recyclability	-	-	95%	-
Cab
ROPS	-	-	ISO 3471:2008	-
FOPS	-	-	ISO 3449:2005	-
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Steering
Maximum Flow - Steering Pump	-	-	22 gpm	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.75 turns	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	2.8 s	-
Maximum Working Pressure - Steering Pump	-	-	3263 psi	-
Steering Articulation Angle - Each Direction	-	-	40 °	-
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	3046 psi	-
Maximum Flow - Implement Pump	-	-	39 gpm	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	24 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	3046 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	-	12.5 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	5.2 s	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	24 gpm	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.4 s	-
Relief Pressure - Tilt Cylinder	-	-	4931 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	32 gpm	-
Maximum Working Pressure - Implement Pump	-	-	4061 psi	-
Hydraulic Cycle Time - Rackback	-	-	2.2 s	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	3.7 s	-
Tires
Other Choices Include	-	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid	-
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Standard Size	-	-	17.5 R25 L2 XTLA	-
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	6.5 ft
Note	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	40.7 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	13.3 ft
B-Pin Height - Maximum Lift	-	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	-	25.8 ft
Reach - Maximum Lift	-	-	-	6.8 ft
Note	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	16.5 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-39.4 °

Compare Equipment Go Back

988 Wheel Loader

995 Wheel Loader

914 Compact Wheel Loader

988 XE Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Time (1,400-1,860 rpm)

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Hydraulic Cycle Times

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage