Compare

Compare Equipment Go Back

Engine
	986 Wheel Loader View Product	910 Compact Wheel Loader View Product Remove	950 GC Wheel Loader \| Front Loader View Product Remove	988 XE Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	449 hp	-	-	580 hp
Engine Model	Cat® C15	Cat C3.6	Cat C7.1	Cat® C18
Peak Power Speed	1600	-	-	1,500 rpm
Gross Power - SAE J1995:2014	456 hp	-	-	588 hp
Net Power - SAE J1349:2011	373 hp	-	-	538 hp
Rated Speed	2000	-	-	1,700 rpm
Rated Speed - 2,000 rpm - EEC 80/1269	373 hp	-	-	-
Rated Speed - 2,000 rpm - ISO 9249	373 hp	-	-	-
Bore	5.4 in	3.85 in	4.13 in	5.7 in
Stroke	6.75 in	4.72 in	5.31 in	7.2 in
Displacement	927 in²	220 in³	428 in³	1105 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lb/ft	-	-	-
Torque Rise	16%	-	-	58%
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Maximum Gross Power	-	110 hp	-	-
Rated Net Power - Rated Engine Speed	-	2200 r/min	-	-
Maximum Gross Power - Rated Engine Speed	-	1800 r/min	-	-
Rated Net Power - SAE J1349	-	99 hp	-	-
Maximum Gross Power - ISO 14396 (metric)	-	112 hp	-	-
Rated Net Power - ISO 9249	-	98 hp	-	-
Maximum Gross Torque - SAE J1995	-	335 ft·lbf	-	-
Maximum Gross Torque - ISO 14396	-	332 ft·lbf	-	-
Maximum Net Torque - SAE J1349	-	329 ft·lbf	-	-
Maximum Net Torque - ISO 9249	-	327 ft·lbf	-	-
Emissions	-	Engine meets Tier 4 Final/Stage V emission standards.	Tier 4/Stage V	-
Note	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	-
Maximum Gross Power - ISO 14396	-	110 hp	-	-
Net Power - ISO 9249	-	-	225 hp	-
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	-	228 hp	-
Maximum Power - 1,700 rpm - ISO 14396	-	-	240 hp	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	-	243 hp	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	-	811 ft·lbf	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	-	805 ft·lbf	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	-	225 hp	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	-	225 hp	-
Maximum Power - 1,700 rpm - SAE J1995	-	-	241 hp	-
Peak Torque - 1,200 rpm	-	-	-	2230 lbf·ft
Operating Specifications
Operating Weight - Standard	97785 lb	-	-	-
Bucket Capacity Range	5.0-10.3 m³ (6.5-13.5 yd³)	-	-	4.7-13 m3 (6.2-17 yd3)
Operating Weight - High Lift	104005 lb	-	-	-
Rated Payload - Standard (Quarry Face)	11 ton (US)	-	-	-
Rated Payload - Loose Material (Standard)	14 ton (US)	-	-	-
Rated Payload - High Lift (Quarry Face)	11 ton (US)	-	-	-
Rated Payload - Loose Material (High Lift)	12.1 ton (US)	-	-	-
Cat Truck Match - Standard	770/735/740/745	-	-	-
Cat Truck Match - High Lift	772/773	-	-	-
Operating Weight	-	-	-	116362 lb
Rated Payload - Quarry Face	-	-	-	12.5 t
Rated Payload - Loose Material	-	-	-	16 t
Transmission
Transmission Type	Cat planetary power shift	-	-	Cat switched reluctance electric drive
Forward - 1	5 mile/h	-	4.5 mile/h	-
Forward - 2	8 mile/h	-	8 mile/h	-
Direct Drive - Forward 2	8 mile/h	-	-	-
Direct Drive - Forward 3	14 mile/h	-	-	-
Direct Drive - Forward 4	24 mile/h	-	-	-
Reverse - 1	5 mile/h	-	4.5 mile/h	-
Reverse - 2	8 mile/h	-	8 mile/h	-
Direct Drive - Reverse 2	9 mile/h	-	-	-
Direct Drive - Reverse 3	16 mile/h	-	-	-
Direct Drive - Reverse 4	25.4 mile/h	-	-	-
Note	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	-
Forward and Reverse - Speed Range 3	-	25 mile/h	-	-
Forward and Reverse - Speed Range 2*	-	12.5 mile/h	-	-
Forward and Reverse - Speed Range 1*	-	6.3 mile/h	-	-
Reverse - 3	-	-	14.2 mile/h	-
Forward - 3	-	-	14.2 mile/h	-
Forward - 4	-	-	22.4 mile/h	-
Forward 1 (virtual)	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	17.5 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Load Sense	-	-	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	2 × 110 cc variable displacement	-	-	Variable displacement piston
Maximum Flow at 2,165 rpm	123 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4050 psi	-	-	4757 psi
Lift Cylinder - Bore	7.5 in	-	-	8.7 in
Lift Cylinder - Stroke	45 in	-	-	41.3 in
Tilt Cylinder - Bore	6.7 in	-	-	8.7 in
Tilt Cylinder - Stroke	28.4 in	-	-	27 in
Maximum Flow at 1,400-1,600 rpm	-	-	-	153 gpm
Hydraulic Cycle Times
Rack Back	4.5 s	-	-	4.5 s
Raise	9 s	-	-	8 s
Dump	3.5 s	-	-	2.2 s
Lower	5.2 s	-	-	-
Lower Float Down	4.3 s	-	-	3.5 s
Total Hydraulic Cycle Time	21.3 s	-	-	18.2 s
Hydraulic System - Steering
Steering System - Circuit	Load Sense	-	-	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	-	-	Piston, variable displacement
Maximum Flow at 1,400 rpm	52 gpm	-	-	-
Steering Cut Off Pressure	4000 psi	-	-	4351 psi
Total Steering Angle	70°	-	-	86°
Maximum Flow at 1,400-1,600 rpm	-	-	-	71.3 gpm
Steering Cycle Times - High Idle	-	-	-	3.4 s
Steering Cycle Times - Low Idle	-	-	-	5.6 s
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con
Axles
Front	Fixed	Fixed; Locking differential (standard)	-	Fixed
Rear	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	-	Trunnion
Oscillation Angle	±12.5°	-	-	13°
Oscillation Angle - Chain Arrangement	±8.5°	-	-	-
Brakes
Brakes	ISO 3450:2011	-	-	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Service Refill Capacities
Fuel Tank	141 gal (US)	43.6 gal (US)	-	147 gal (US)
Fuel Tank - Short Lift	127 gal (US)	-	-	-
Cooling Systems	26 gal (US)	-	-	-
Crankcase	9 gal (US)	-	4.8 gal (US)	-
Diesel Exhaust Fluid Tank	6 gal (US)	-	-	8.7 gal (US)
Transmission	20 gal (US)	0.8 gal (US)	11.9 gal (US)	16 gal (US)
Axle Oil - Differentials and Final Drives - Front	49 gal (US)	-	-	-
Axle Oil - Differentials and Final Drives - Rear	45 gal (US)	-	-	-
Hydraulic System Factory Fill	87 gal (US)	-	-	-
Hydraulic System - Tank Only	34 gal (US)	-	-	-
Cooling System	-	5.7 gal (US)	13.2 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	4.8 gal (US)	-	-
Hydraulic System - Including Tank	-	25.9 gal (US)	-	-
Engine Crankcase	-	2.6 gal (US)	-	16 gal (US)
Hydraulic Tank	-	14.5 gal (US)	29.6 gal (US)	-
Note	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%
Axles - Front Center Differential	-	2 gal (US)	-	-
Axles - Rear Center Differential	-	2 gal (US)	-	-
DEF Tank	-	-	4.2 gal (US)	-
Fuel Tank Size	-	-	76.6 gal (US)	-
Differential - Final Drives - Rear	-	-	10 gal (US)	49 gal (US)
Differential - Final Drives - Front	-	-	10.6 gal (US)	49 gal (US)
Cooling System - Jacket Water	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	8 gal (US)
Hydraulic System - Implement/Steering	-	-	-	126 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	109 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	109 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	110 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	13.5 ft	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-
Reach - Maximum Lift	7.1 ft	-	-	-
Clearance at Maximum Lift	10.1 ft	-	-	-
B-Pin Height - Maximum Lift	16.1 ft	-	-	-
Maximum Overall Height - Bucket Raised	22.4 ft	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-
Wheel Base	12.5 ft	-	-	-
Maximum Overall Length	36.6 ft	-	-	-
Front Axle Centerline to Bucket Tip	13.8 ft	-	-	-
Note	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	13.5 ft	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-
Reach - Maximum Lift	7.4 ft	-	-	-
Clearance at Maximum Lift	11.6 ft	-	-	-
B-Pin Height - Maximum Lift	17.6 ft	-	-	-
Maximum Overall Height - Bucket Raised	23.9 ft	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-
Wheel Base	12.5 ft	-	-	-
Maximum Overall Length	38 ft	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-
Note	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	-	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	13.5 ft	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-
Ground to Center of Rear Axle	3.2 ft	-	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-
Reach at Maximum Lift	8 ft	-	-	-
Clearance at Maximum Lift	10.7 ft	-	-	-
B-Pin Height at Maximum Lift	15 ft	-	-	-
Maximum Overall Height, Bucket Raised	20.9 ft	-	-	-
Rear Axle Center Line to Bumper	10.3 ft	-	-	-
Wheel Base	12.5 ft	-	-	-
Maximum Overall Length	35 ft	-	-	-
Front Axle Centerline to Bucket Tip	12.2 ft	-	-	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	13.5 ft	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-
Ground to Center of Rear Axle	3.2 ft	-	-	-
Ground to Fuel Tank Clearance	2.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-
B-Pin Height at Maximum Lift	15 ft	-	-	-
Rear Axle Center Line to Bumper	10.3 ft	-	-	-
Wheel Base	12.5 ft	-	-	-
Maximum Overall Length	35.4 ft	-	-	-
Front Axle Centerline to Bucket Tip	12.6 ft	-	-	-
Weights
Operating Weight	-	18102 lb	41554 lb	-
Buckets
Bucket Capacities	-	1.3-3.5 m3 (1.7-4.6 yd3)	2.9-4.4 m³ (3.75-5.75 yd³)	-
Bucket Capacities - General Purpose	-	1.3-1.9 m³ (1.7-2.5 yd³)	-	-
Bucket Capacities - Light Material	-	2.5-3.5 m³ (3.3-4.6 yd³)	-	-
Sustainability
Recyclability	-	95%	-	-
Cab
ROPS	-	ISO 3471:2008	-	-
FOPS	-	ISO 3449:2005	-	-
Note (2)	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-	-
Note (3)	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-	-
Note (1)	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-	-
Note (4)	-	*The measurements were conducted with the cab doors and windows closed.	-	-
Steering
Maximum Working Pressure - Steering Pump	-	2683 psi	-	-
Steering Articulation Angle - Each Direction	-	40 °	-	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	3.2 s	-	-
Maximum Flow - Steering Pump	-	17 gpm	-	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	3.75 turns	-	-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach	-	1.4 s	-	-
Hydraulic Cycle Time - Total Cycle Time	-	12.5 s	-	-
Maximum Working Pressure - Implement Pump	-	3408 psi	-	-
Relief Pressure - Tilt Cylinder	-	4931 psi	-	-
Hydraulic Cycle Time - Rackback	-	2.2 s	-	-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	3046 psi	-	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	5.2 s	-	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	3046 psi	-	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	24 gpm	-	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	-	24 gpm	-	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	3.7 s	-	-
Maximum Flow - Implement Pump	-	32 gpm	-	-
Tires
Note (2)	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-	-
Standard Size	-	15.5 R25 L2 XTLA	-	-
Other Choices Include	-	17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow	-	-
Note (3)	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-	-
Note (1)	-	Other tire choices are available. Contact your Cat dealer for details.	-	-
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	-	76 dB(A)*	-
Note (1)	-	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	-	73 dB(A)	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	-	For machines in European Union countries and in countries that adopt the EU Directives	-
With Cooling Fan Speed at Maximum Value - Note	-	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	-	107 LWA***	-
Note (3)	-	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
Note (2)	-	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	73 dB(A)	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	-	109 dB(A)	-
Dimensions
Rack Back - Ground	-	-	40 degrees	-
Height - Top of Exhaust Pipe	-	-	11.17 ft	-
Centerline of Rear Axle to Hitch	-	-	5.42 ft	-
Lift Arm Clearance	-	-	12 ft	-
B-Pin Height	-	-	13.75 ft	-
Centerline of Rear Axle to Edge of Counterweight	-	-	6.75 ft	-
Ground Clearance	-	-	1.5 ft	-
Rack Back - Maximum Lift	-	-	60 degrees	-
Height - Top of Hood	-	-	8.75 ft	-
Wheel Base	-	-	10.83 ft	-
Height - Top of ROPS	-	-	11.33 ft	-
Rack Back - Carry	-	-	45 degrees	-
Note	-	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-
Weights and Operating Specifications
Note (2)	-	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-
Tipping Load - Full Turn - Rigid Tires**	-	-	25875 lb	-
Breakout Force	-	-	34638 lbf	-
Tipping Load - Full Turn - ISO 14397-1*	-	-	24264 lb	-
Note (3)	-	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-
Operating Weight	-	-	41554 lb	-
Note (1)	-	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	-	9.4 s	-
Steering System - Pump Type	-	-	Piston	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	-	4047 psi	-
Implement System - Maximum Pump Output at 2,390 rpm	-	-	68 gpm	-
Engine - Tier 4 Final/Stage IV
Emissions	-	-	Tier 4/Stage IV	-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	6.5 ft
Note	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	40.7 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	13.3 ft
B-Pin Height - Maximum Lift	-	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	-	25.8 ft
Reach - Maximum Lift	-	-	-	6.8 ft
Note	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	16.5 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-39.4 °

Compare Equipment Go Back

986 Wheel Loader

910 Compact Wheel Loader

950 GC Wheel Loader | Front Loader

988 XE Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage