Compare Equipment Go Back
 772 (07) Off-Highway Truck |
 794 AC Mining Truck |
 793F Mining Truck |
|
Operating Specifications |
|||
|---|---|---|---|
| Nominal Payload Class (100%) | 51.6 ton (US) | - | - |
| Top Speed - Loaded | 49.2 mile/h | - | - |
| Maximum Payload Class (110%) | 56.7 ton (US) | - | - |
| Body Capacity - SAE 2:1 | 40.8 yd³ | - | - |
| Target Payload Capacity | 51.6 ton (US) | - | - |
| Not to Exceed Payload (120%) | 61.9 ton (US) | - | - |
| Body Capacity (SAE 2:1)** | 40.8 yd³ | - | - |
Engine |
|||
| Engine Model | Cat® C18 | Cat® C175-16 | Cat® C175-16 |
| Rated Engine Speed | 1700 r/min | - | - |
| Gross Power - SAE J1995:2014 | 605 hp | - | - |
| Net Power - SAE J1349:2011 | 550 hp | - | - |
| Net Power - ISO 9249 | 550 hp | - | - |
| Number of Cylinders | 6 | - | - |
| Bore | 5.7 in | 6.9 in | 6.9 in |
| Stroke | 7.2 in | 8.7 in | 8.7 in |
| Displacement | 1105 in³ | 5187 in³ | 5187 in³ |
| Net Torque - SAE J1349 | 2221 ft-lb | - | - |
| Engine Power - ISO 14396 | 598 hp | - | - |
| Gross Power - SAE J1995 | - | 3500 hp | 2650 hp |
| Standard Gross Power - SAE J1995 | - | 3500 hp | - |
| Optional Gross Power - SAE J1995 | - | 3100 hp | - |
| Optional Gross Power - SAE J1995 (Option 2) | - | 2750 hp | - |
| Rated Speed | - | 1800 r/min | 1750 r/min |
| Net Power - SAE J1349 | - | 3405 hp | 2478 hp |
| Emissions Rating | - | Fuel Optimized | - |
| Note (1) | - | Contact factory for high altitude configuration. | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
| Note (2) | - | Tier 4 / EU Stage V option available for regions that require these emissions standards. | EPA Tier 4 Final / EU Stage V available for applicable markets. |
| Note (3) | - | Tier 4 / EU Stage V engine option Net Power - SAE J1349: 3434 HP (2561 kW) | - |
| Emissions | - | - | Fuel Optimized |
Weights - Approximate |
|||
| Target Gross Machine Operating Weight | 181000 lb | - | - |
| Chassis Weight | 59223 lb | 426237 lb | 265639 lb |
| Body Weight | 17306 lb | 64346 lb | 67682 lb |
| Target Gross Machine Weight | 181000 lb | - | - |
| Nominal Rated Payload | - | 327 ton (US) | 256 ton (US) |
| Rated Gross Machine Weight | - | 1150000 lb | 851000 lb |
| Note (1) | - | Consult your tire manufacturer for maximum tire load. | Consult your tire manufacturer for maximum tire load |
| Note (2) | - | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires | Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires. |
| Note (3) | - | Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
| Note (4) | - | Tier 4 Final / Stage V chassis weight: 426312 lb (193372 kg) | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | 51.4 % | 49 % | 48 % |
| Front Axle - Loaded | 34.2 % | 33 % | 33 % |
| Rear Axle - Empty | 48.6 % | 51 % | 52 % |
| Rear Axle - Loaded | 65.8 % | 67 % | 67 % |
Transmission |
|||
| Forward - 1 | 8 mile/h | - | 8 mile/h |
| Forward - 2 | 10.9 mile/h | - | 10.8 mile/h |
| Forward - 3 | 14.8 mile/h | - | 14.8 mile/h |
| Forward - 4 | 19.8 mile/h | - | 19.9 mile/h |
| Forward - 5 | 26.9 mile/h | - | 27.1 mile/h |
| Forward - 6 | 36.2 mile/h | - | 37.3 mile/h |
| Forward - 7 | 49.2 mile/h | - | - |
| Reverse | 10.4 mile/h | - | 7.3 mile/h |
| Top Speed - Loaded | - | - | 37.3 mile/h |
Final Drives |
|||
| Differential Ratio | 2.74:1 | - | 1.8:1 |
| Planetary Ratio | 4.80:1 | - | 16:01 |
| Total Reduction Ratio | 13.14:1 | 35:01:00 | 26.8:1 |
Brakes |
|||
| Brake Surface - Front | 216 in² | - | 13921 in² |
| Brake Surface - Rear | 7794 in² | - | 20847 in² |
| Brake Standards | ISO 3450:2011 | - | - |
| Standards | - | - | J-ISO 3450 JAN88, ISO 3450:1996 |
Service Refill Capacities |
|||
| Fuel Tank | 140 gal (US) | 1300 gal (US) | 750 gal (US) |
| Cooling System | 33 gal (US) | 211 gal (US) | 284 gal (US) |
| Differential - Final Drives | 47 gal (US) | - | - |
| Steering Tank | 14.5 gal (US) | - | - |
| Steering System - Including Tank | 23 gal (US) | - | 77 gal (US) |
| Torque Converter - Transmission System | 17 gal (US) | - | - |
| Brake Hoist System | 60 gal (US) | - | - |
| DEF Tank | 6 gal (US) | - | - |
| Crankcase | 17 gal (US) | 82 gal (US) | 82 gal (US) |
| Brake/Hoist Hydraulic Tank | 38 gal (US) | - | - |
| Final Drive - Each | - | 67 gal (US) | - |
| Hydraulic Tank | - | 296 gal (US) | - |
| Hydraulic System - Including Tank | - | 385 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 100 gal (US) | 62 gal (US) |
| Note (1) | - | DEF Tank only available for EPA Tier 4 / EU Stage V engine option. | DEF Tank only available for EPA Tier 4 engine option. |
| Fuel Tank - Optional | - | - | 1300 gal (US) |
| Rear Axle - Housing | - | - | 260 gal (US) |
| Brake Hoist System - Includes Tank | - | - | 347 gal (US) |
| Torque Converter - Transmission Sump | - | - | 27 gal (US) |
| Torque Converter/Transmission System - Including Sump | - | - | 55 gal (US) |
Body Hoists |
|||
| Pump Flow - High Idle | 112 gal/min | - | 224 gal/min |
| Relief Valve Setting - Raise | 2750 psi | 3029 psi | 2955 psi |
| Relief Valve Setting - Lower | 500 psi | - | - |
| Body Raise Time - High Idle | 8 s | 24 s | 19 s |
| Body Lower Time - Float | 10 s | - | 20 s |
| Body Power Down - High Idle | 10 s | - | 17.5 s |
| Pump Flow - High Idle (HAA at 1,800 rpm) | - | 221 gal/min | - |
| Pump Flow - High Idle (LAA at 1,960 rpm) | - | 240 gal/min | - |
| High Idle Body Lower Time - Float | - | 20 s | - |
| Total Cycle Time | - | 44 s | - |
| Note (1) | - | Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in both stages. | - |
| Note (2) | - | Power raise in both stages; power down in both stages possible. | - |
| Note (3) | - | Automatic body-lower modulation reduces impact on frame. | - |
| Type | - | - | Twin, two-stage hydraulic cylinders with snubbing valve |
Suspension |
|||
| Rear axle - Oscillation | 8.9 ° | - | ±4.9 degrees |
| Empty Loaded Cylinder Stroke Front | 9.2 in | - | - |
| Empty Loaded Cylinder Stroke Rear | 5.8 in | - | - |
| Type | - | - | Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments |
| Effective Cylinder Stroke - Front | - | - | 5.1 in |
| Effective Cylinder Stroke - Rear | - | - | 4.2 in |
Capacity - Dual Slope - 100% Fill Factor |
|||
| Heaped 2:1 (SAE) | 40.8 yd³ | - | - |
| Struck | 31.3 yd³ | - | - |
Capacity - Flat Floor - 100% Fill Factor |
|||
| Struck | 31.3 yd³ | - | - |
| Heaped 2:1 (SAE) | 40.9 yd³ | - | - |
ROPS |
|||
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. | - | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
| ROPS Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - | - |
Sound |
|||
| Sound Standards (3) | Operator Equivalent Sound Pressure Level (Leq) is 78 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. | - | - |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 118 dB(A). | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. | - |
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB(A) for cab offered by Caterpillar when properly installed, maintained, and tested with doors and windows closed. | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Sound Standards | - | - | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
Steering |
|||
| Turning Diameter - Front | 57.7 ft | - | 93.2 ft |
| Steering Standards | ISO 5010:2007 | ISO 5010:2019 | SAE J15111 OCT90, ISO 5010:1992 |
| Steer Angle | 40.5 ° | 39 ° | 36 ° |
| Turning Circle - Clearance Diameter | 66.6 ft | - | - |
| Note | - | Gross Machine Operating Weight is 521 631 kg (1,150,000 lb). | - |
Dimensions |
|||
| Height - Top of ROPS | 12.8 ft | - | - |
| Inside Body Depth - Maximum | 5.7 ft | - | - |
| Overall Body Length | 26.8 ft | - | - |
| Inside Body Length | 19 ft | - | - |
| Overall Length | 28.9 ft | - | - |
| Wheel Base | 13 ft | - | - |
| Rear Axle - Tail | 9.5 ft | - | - |
| Ground Clearance | 1.6 ft | - | - |
| Dump Clearance | 1.5 ft | - | - |
| Loading Height - Empty | 11.6 ft | - | - |
| Overall Height - Body Raised | 27.1 ft | - | - |
| Operating Width | 15.7 ft | - | - |
| Centerline Front Tire Width | 10.4 ft | - | - |
| Engine Guard Clearance | 2 ft | - | - |
| Outside Body Width | 12.9 ft | - | - |
| Inside Body Width | 11.9 ft | - | - |
| Front Canopy Height | 13.7 ft | - | - |
| Rear Axle - Clearance | 1.9 ft | - | - |
| Centerline of Rear Dual Tire Width | 8.7 ft | - | - |
| Overall Tire Width | 12.9 ft | - | - |
Tires |
|||
| Standard Tire | 21.00R33 (E4) | - | - |
| Standard Tires | - | 53/80 R63 | 40.00 R57 |
| Rims | - | 36" x 63" | 29" or 32" |
| Note (1) | - | Quick Change Rims optional. | Extended life wheel stations optional. |
| Note (2) | - | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
| Note | - | - | Quick Change Rims optional. |
AC Drive System |
|||
| Total Reduction Ratio | - | 35:01:00 | - |
| Top Speed - Loaded | - | 37 mile/h | - |
| Generator/Alternator | - | Brushless, engine mounted, dual bearing | - |
| Controls | - | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration | - |
| Wheel Motor | - | High-torque AC induction, rear axle mounted | - |
| Cooling System | - | Variable speed, hydraulically driven cooling system | - |
Braking System |
|||
| Service Brakes | - | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Front Wet Disc Brake Surface Area | - | 20378 in² | 13921 in³ |
| Rear - Wet Disc Brake Surface Area | - | 30750 in² | 20847 in³ |
| Standards | - | ISO 3450:2011 | (Service and Secondary): ISO 3450:1996 |
| Parking Brake | - | Four-corner, Multi-disc, Spring applied, Hydraulically Released | - |
| Load Brake | - | Rear service brakes | Rear service brakes |
| Dynamic Retarding Power - Continuous | - | 5480 hp | - |
| Parking Brakes | - | - | Four-corner, Multi-disc, Spring Applied, Hydraulically Released |
| Note | - | - | Anti-Lock Brake System (ABS) optional with CMD package |
Capacity - HE Body - 100% fill factor |
|||
| Struck | - | 108-133 m³ (142-175 yd³) | - |
| Heaped (SAE 2:1) | - | 180-222 m³ (236-290 yd³) | - |
| Dump Body Plate Thickness Varies Depending on Body Selection - Floor Plate | - | 0.63 in | - |
| Dump Body Plate Thickness Varies Depending on Body Selection - Front Plate | - | 0.35 in | - |
| Dump Body Plate Thickness Varies Depending on Body Selection - Side Plate | - | 0.31 in | - |
| Dump Body Plate Thickness Varies Depending on Body Selection - Canopy Plate | - | 0.2 in | - |
| Note | - | Contact your local Cat dealer for body recommendations. | - |
Dimensions (Approximate) |
|||
| Height - Top of ROPS | - | 22.25 ft | - |
| Overall Length | - | 50.75 ft | - |
| Wheel Base | - | 21.83 ft | - |
| Rear Axle - Tail | - | 15.5 ft | - |
| Ground Clearance | - | 2.67 ft | - |
| Dump Clearance | - | 3 ft | - |
| Loading Height - Empty | - | 22.92 ft | - |
| Overall Height - Body Raised | - | 48.42 ft | - |
| Centerline Front Tire Width | - | 23 ft | - |
| Front Axle Clearance | - | 3.17 ft | - |
| Canopy Width (without optional rock deflectors) | - | 29.75 ft | - |
| Outside Body Width | - | 29.75 ft | - |
| Inside Body Width | - | 28.08 ft | - |
| Front Canopy Height | - | 26.33 ft | - |
| Rear Axle - Clearance | - | 3.08 ft | - |
| Centerline of Rear Dual Tire Width | - | 18.75 ft | - |
| Overall Tire Width | - | 28.67 ft | - |
| Overall Canopy Width | - | 31.5 ft | - |
Cab |
|||
| ROPS Standards (1) | - | Rollover Protective Structure (ROPS) meets ISO 3471:2008 criteria for operator and ISO 13459:2012 for trainer. | The operator sound pressure level, 76 dB(A), complies with ISO 6394 and ISO 6396. |
| FOPS Standards | - | Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II for operator and ISO 13459:2012 Level II for trainer. | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II criteria. |
| Air Conditioning | - | - | Air Conditioning (HFC - 134A refrigerant): 24,300 Btu/hr |
| Heater / Defroster | - | - | 38900 Btu/h |
| Note | - | - | Ambient capabilities down to -30C (-22F) for heater/defroster and up to 50C (122F) for air conditioning. |
| ROPS Standards (2) | - | - | ROPS (Rollover Protective Structure) meets ISO 3471:1994 criteria. |
Capacity - HP Body - 100% Fill Factor |
|||
| Note (1) | - | - | Contact your local Cat dealer for body recommendation. |
| Struck | - | - | 112.6-151 m³ (147-197.5 yd³) |
| Heaped (SAE 2:1)* | - | - | 162-191 m³ (212-250 yd³) |
| Note (2) | - | - | *ISO 6483:1980 |
Capacity - MSD II - 100% Fill Factor |
|||
| Note | - | - | Contact your local Cat dealer for body recommendation. |
| Struck | - | - | 112-142 m³ (146-186 yd³) |
| Heaped (SAE 2:1) | - | - | 159-190 m3 (209-250 yd3) |
Add a Similar Product:
-
775G Off-Highway Truck Bare Chassis Add
-
772G Off-Highway Truck Bare Chassis Add
-
775 Off-Highway Truck Add
-
798 AC Electric Drive Mining Truck Add
-
770 Off-Highway Truck Add
-
797F Mining Truck Add
-
796 AC Electric Drive Mining Truck Add
-
789 Next Generation Add
-
785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add