Compare Equipment Go Back
 775 Off-Highway Truck |
 MH3040 Material Handler |
|
|
Operating Specifications |
|||
|---|---|---|---|
| Nominal Payload Class (100%) | 70.5 ton (US) | - | - |
| Top Speed - Loaded | 41.6 mile/h | - | - |
| Maximum Working Payload (110%) | 77.5 ton (US) | - | - |
| Target Payload (100%) | 70.5 ton (US) | - | - |
| Maximum Allowable Payload (120%)* | 84.6 ton (US) | - | - |
| Note (2) | * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. | - | - |
| Note (1) | Capacity with Dual Slope body – no liner. | - | - |
| Body Capacity - SAE 2:1 | 55.23 yd³ | - | - |
Engine |
|||
| Engine Model | Cat® C27 | Cat C7.1 | - |
| Rated Engine Speed | 1800 r/min | - | - |
| Gross Power - SAE J1995:2014 | 825 hp | - | - |
| Net Power - SAE J1349:2011 | 768 hp | - | - |
| Net Power - 80/1269/EEC | 775 hp | - | - |
| Net Power - ISO 9249 | 775 hp | 202 hp | - |
| Bore | 5.4 in | 4 in | - |
| Stroke | 6 in | 5 in | - |
| Displacement | 1648 in³ | 428 in³ | - |
| Engine Power - ISO 14396 | 812 hp | - | - |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
| Net Torque | 3148 ft-lb | - | - |
| Peak Torque - Speed | 1200 r/min | - | - |
| Note (1) | Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | - |
| Note (3) | No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. | - | - |
| Emissions | Meets EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - |
| Net Power - ISO 9249 (DIN) | - | 205 hp (metric) | - |
| Engine Power - ISO 14396:2002 | - | 204 hp | - |
| Engine Power - ISO 14396 (DIN) | - | 207 hp (metric) | - |
| Biodiesel Capability | - | Up to B20¹ | - |
Capacity - Dual Slope - 100% Fill Factor |
|||
| Struck | 42.7 yd³ | - | - |
| Heaped (SAE 2:1)* | 55.5 yd³ | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - |
| Note (2) | *ISO 6483:1980 | - | - |
Capacity - Flat Floor - 100% Fill Factor |
|||
| Struck | 42.2 yd³ | - | - |
| Heaped (SAE 2:1)* | 55.2 yd³ | - | - |
| Note (1) | Contact your local Cat dealer for body recommendation. | - | - |
| Note (2) | *ISO 6483:1980 | - | - |
Weight Distributions - Approximate |
|||
| Front Axle - Empty | 50 % | - | - |
| Front Axle - Loaded | 34 % | - | - |
| Rear Axle - Empty | 50 % | - | - |
| Rear Axle - Loaded | 66 % | - | - |
Transmission |
|||
| Forward - 1 | 6.6 mile/h | - | - |
| Forward - 2 | 9.3 mile/h | - | - |
| Forward - 3 | 12.6 mile/h | - | - |
| Forward - 4 | 16.8 mile/h | - | - |
| Forward - 5 | 22.8 mile/h | - | - |
| Forward - 6 | 30.7 mile/h | - | - |
| Forward - 7 | 41.6 mile/h | - | - |
| Reverse | 8.7 mile/h | - | - |
| Note | Maximum travel speeds with standard 24.00R35 (E4) tires. | - | - |
| Maximum Travel Speed | - | 11.2 mile/h | - |
| Drawbar Pull | - | 34621 ft·lbf | - |
| Maximum Gradeability | - | 43.8% | - |
Final Drives |
|||
| Differential Ratio | 3.64:1 | - | - |
| Planetary Ratio | 4.80:1 | - | - |
| Total Reduction Ratio | 17.49:1 | - | - |
Brakes |
|||
| Brake Surface - Front | 257 in² | - | - |
| Brake Surface - Rear | 9497 in² | - | - |
| Brake Standards | ISO 3450:2011 | - | - |
Service Refill Capacities |
|||
| Fuel Tank | 210 gal (US) | - | - |
| Cooling System | 45 gal (US) | 6.6 gal (US) | - |
| Differential - Final Drives | 38 gal (US) | - | - |
| Steering Tank | 9.5 gal (US) | - | - |
| Steering System - Including Tank | 14 gal (US) | - | - |
| Brake Hoist System | 85 gal (US) | - | - |
| Torque Converter - Transmission System - LRC | 16 gal (US) | - | - |
| Crankcase | 24 gal (US) | - | - |
| Brake/Hoist Hydraulic Tank | 46.5 gal (US) | - | - |
| Torque Converter - Transmission System - HRC | 18 gal (US) | - | - |
| Fuel Tank Capacity | - | 125.2 gal (US) | - |
| Engine Oil | - | 6.6 gal (US) | - |
| Swing Drive | - | 2.6 gal (US) | - |
| Rear Axle - Housing (Differential) | - | 5 gal (US) | - |
| Front Steering Axle - Differential | - | 6.3 gal (US) | - |
| Final Drive | - | 1.6 gal (US) | - |
| Powershift Transmission | - | 0.8 gal (US) | - |
| Hydraulic System - Including Tank | - | 86.9 gal (US) | - |
| Hydraulic Tank | - | 38.8 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | - | 10.8 gal (US) | - |
Body Hoists |
|||
| Pump Flow - High Idle | 118 gal/min | - | - |
| Relief Valve Setting - Raise | 2502 psi | - | - |
| Relief Valve Setting - Lower | 500 psi | - | - |
| Body Raise Time - High Idle | 10 s | - | - |
| Body Lower Time - Float | 14 s | - | - |
| Body Power Down - High Idle | 14 s | - | - |
Weights - Approximate |
|||
| Maximum Gross Vehicle Weight | 246503 lb | - | - |
Suspension |
|||
| Empty Loaded Cylinder Stroke Front | 9.2 in | - | - |
| Rear Axle - Oscillation | 8.1° | - | - |
| Empty Loaded Cylinder Stroke Rear | 5.8 in | - | - |
Tires |
|||
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. | - | - |
| Note (1) | Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. | - | - |
| Standard Tire | 24.00R35 (E4) | - | - |
ROPS |
|||
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. | - | - |
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. | - | - |
Sound |
|||
| Sound Standards (1) | The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t | - | - |
| Sound Standards (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). | - | - |
| Sound Standards (3) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. | - | - |
Steering |
|||
| Turning Diameter - Front | 77.1 ft | - | - |
| Steering Standards | ISO 5010:2007 | - | - |
| Steer Angle | 31 ° | - | - |
| Turning Circle - Clearance Diameter | 85.6 ft | - | - |
Sustainability |
|||
| Recyclability | 98% | 95% | - |
Machine Weights |
|||
| Maximum Operating Weight | - | 86000 lb | - |
| Minimum Operating Weight | - | 81500 lb | - |
Working Ranges |
|||
| Maximum Reach | - | 50.8 ft | - |
| Boom | - | MH 9.3 m (30'6") | - |
| Stick | - | Industrial 7.1 m (23'3") | - |
| Maximum Height | - | 57.4 ft | - |
| Maximum Dump Height | - | 17.8 ft | - |
| Maximum Depth | - | 17.2 ft | - |
| Boom Pin Height | - | 40 ft | - |
Hydraulic System |
|||
| Maximum Pressure - Implements | - | 5076 psi | - |
| Maximum Pressure - Swing | - | 4061 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | - |
Swing Mechanism |
|||
| Swing Speed | - | 6 r/min | - |
| Maximum Swing Torque | - | 60628 ft-lb | - |
Dimensions |
|||
| Boom | - | MH 9.3 m (30'6") | - |
| Stick | - | Industrial 7.1 m (23'3") | - |
| Shipping Length | - | 42 ft | - |
| Machine Length | - | 20.7 ft | - |
| Tail Swing Radius | - | 10.3 ft | - |
| Counterweight Clearance | - | 5.7 ft | - |
| Cab Height- Lowered | - | 12 ft | - |
| Cab Height-Lowered with OPG | - | 12.4 ft | - |
| Cab Height-Raised | - | 20.5 ft | - |
| Cab Height-Raised with OPG | - | 21 ft | - |
| Wheel Base | - | 10.5 ft | - |
| Shipping Width | - | 9.8 ft | - |
| Ground Clearance | - | 0.9 ft | - |
| Undercarriage Length | - | 20.4 ft | - |
Air Conditioning System |
|||
| Note (1) | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.64 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.892 tons). | - |
Add a Similar Product:
-
772G Off-Highway Truck Bare Chassis Add
-
775G Off-Highway Truck Bare Chassis Add
-
770 Off-Highway Truck Add
-
772 (07) Off-Highway Truck Add
-
797F Mining Truck Add
-
798 AC Electric Drive Mining Truck Add
-
794 AC Mining Truck Add
-
793F Mining Truck Add
-
796 AC Electric Drive Mining Truck Add
-
785 Mining Truck (LRC, Tier 4 Final / EU Stage V) Add