Compare

Compare Equipment Go Back

Engine
	988 XE Wheel Loader View Product	988 Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	903D Compact Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	580 hp	-	-
Engine Model	Cat® C18	Cat® C18	Cat® 3516E	Cat C2.4*
Rated Speed	1,700 rpm	1700/rpm	-	-
Peak Power Speed	1,500 rpm	1500/rpm	-	-
Gross Power - SAE J1995:2014	588 hp	588 hp	1870 hp	-
Net Power - SAE J1349:2011	538 hp	538 hp	-	-
Bore	5.7 in	5.7 in	6.7 in	3.4 in
Stroke	7.2 in	7.2 in	8.5 in	4 in
Displacement	1105 in³	1105 in³	4766 in³	147 in²
Peak Torque - 1,200 rpm	2230 lbf·ft	2104 lbf·ft	-	-
Torque Rise	58%	58 %	39%	-
Note (1)	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Emissions	-	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	-
Engine Power - ISO 14396	-	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	8549 lb/ft	-
Note (3)	-	-	The gross power advertised is with the fan at maximum speed.	-
Maximum Gross Power	-	-	-	42 hp
Gross Power	-	-	-	42 hp
Net Power - 2,200 rpm - SAE J1349 R-ing	-	-	-	40 hp
Net Power - 2,200 rpm - ISO 9249 R-ing	-	-	-	40 hp
Note	-	-	-	*Engine meets U.S. EPA Tier 4 Final emission standards.
Operating Specifications
Operating Weight	116362 lb	112574 lb	-	-
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	4.7-13 m3 (6.2-17 yd3)	17.2-43.6 m3 (22.3-57 yd3)	-
Rated Payload - Quarry Face	12.5 t	12.5 t	-	-
Rated Payload - Loose Material	16 t	16 t	-	-
Cat Truck Match - Standard	-	770 - 772	785/789	-
Cat Truck Match - High Lift	-	773 - 775	789/793/794	-
Operating Weight - Standard	-	-	543772 lb	-
Operating Weight - High Lift	-	-	547675 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Note	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Transmission
Transmission Type	Cat switched reluctance electric drive	Cat planetary powershift	Cat Planetary Power Shift	-
Forward 1 (virtual)	4.3 mile/h	-	-	-
Forward 2 (virtual)	7 mile/h	-	-	-
Forward 3 (virtual)	13.8 mile/h	-	-	-
Forward 4 (virtual)	20 mile/h	-	-	-
Reverse 1 (virtual)	4.3 mile/h	-	-	-
Reverse 2 (virtual)	7 mile/h	-	-	-
Reverse 3 (virtual)	17.5 mile/h	-	-	-
Forward - 1	-	4 mile/h	4.6 mile/h	-
Forward - 2	-	7.2 mile/h	8 mile/h	-
Forward - 3	-	12.7 mile/h	13.6 mile/h	-
Forward - 4	-	21.6 mile/h	-	-
Reverse - 1	-	4.7 mile/h	5 mile/h	-
Reverse - 2	-	8.3 mile/h	8.8 mile/h	-
Reverse - 3	-	14.4 mile/h	14.9 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	Lock-up disables	-
Direct Drive - Forward 2	-	7.8 mile/h	8.7 mile/h	-
Direct Drive - Forward 3	-	13.9 mile/h	15.2 mile/h	-
Direct Drive - Forward 4	-	24.4 mile/h	-	-
Direct Drive - Reverse 1	-	5 mile/h	Lock-up disables	-
Direct Drive - Reverse 2	-	8.9 mile/h	9.6 mile/h	-
Direct Drive - Reverse 3	-	15.8 mile/h	16.8 mile/h	-
Note	-	-	Travel speeds based on 58/85-57 tires.	-
Travel Speed	-	-	-	12.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH-Positive Flow Control, Flow Sharing	EH- Positive Flow Control, Flow Sharing	Positive Flow Control	-
Lift/Tilt System - Pump	Variable displacement piston	Variable displacement piston	Variable Displacement Piston	-
Maximum Flow at 1,400-1,600 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	4757 psi	5004 psi	-
Lift Cylinder - Bore	8.7 in	-	-	-
Lift Cylinder - Stroke	41.3 in	-	-	-
Tilt Cylinder - Bore	8.7 in	-	-	-
Tilt Cylinder - Stroke	27 in	-	-	-
Maximum Flow at 1,400-1,860 rpm	-	153 gpm	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	210 mm × 1050 mm (8.7 in × 41.3 in)	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	266 mm × 685 mm (8.7 in × 27 in)	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	-	Variable displacement piston	Open Loop and Pressure Reducing	-
Relief Valve Setting - Main	-	551 psi	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	541 gpm	-
Hydraulic Cycle Times
Rack Back	4.5 s	-	4.9 s	-
Raise	8 s	-	12.6 s	-
Dump	2.2 s	-	3.1 s	-
Lower Float Down	3.5 s	-	4.2 s	-
Total Hydraulic Cycle Time	18.2 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, load sensing	Pilot, Load Sensing	-
Steering System - Pump	Piston, variable displacement	Piston, variable displacement	Piston, Variable Displacement	-
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	71.3 gpm	-	-
Steering Cut Off Pressure	4351 psi	-	-	-
Total Steering Angle	86°	86 °	80 degrees	-
Steering Cycle Times - High Idle	3.4 s	3.4 s	4.3 s	-
Steering Cycle Times - Low Idle	5.6 s	5.6 s	7.6 s	-
Relief Valve Setting - Steering	-	4351 psi	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-
Axles
Front	Fixed	Fixed	Fixed	-
Rear	Trunnion	Trunnion	Trunnion	-
Oscillation Angle	13°	13 °	9°	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	ISO 3450:2011	-
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	109 dB(A)	111 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	109 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	110 dB(A)	112 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	147 gal (US)	188 gal (US)	-	11.4 gal (US)
Cooling System - Jacket Water	30 gal (US)	-	-	-
Cooling Systems - Power Train	8 gal (US)	-	-	-
Engine Crankcase	16 gal (US)	-	-	-
Diesel Exhaust Fluid Tank	8.7 gal (US)	-	-	-
Transmission	16 gal (US)	24.3 gal (US)	-	-
Differential - Final Drives - Front	49 gal (US)	49.1 gal (US)	-	-
Differential - Final Drives - Rear	49 gal (US)	49.1 gal (US)	-	-
Hydraulic System - Implement/Steering	126 gal (US)	-	-	-
Note	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	-
Cooling System	-	31.7 gal (US)	-	3 gal (US)
Coolant (Validated by Test Cell Fill Quantities)	-	33 gal (US)	-	-
Crankcase	-	15.9 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	-	8.7 gal (US)	-	-
Transmission - Validated by Test Cell Fill Quantities	-	29 gal (US)	-	-
Hydraulic System Factory Fill	-	125.5 gal (US)	-	-
Hydraulic System - Tank Only	-	63.4 gal (US)	-	-
Hydraulic System	-	-	-	6.3 gal (US)
Engine Oil	-	-	-	2.4 gal (US)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-
Wheel Base	14.9 ft	-	-	6.42 ft
Maximum Overall Length	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Cab Height	-	-	-	8.25 ft
Ground Clearance	-	-	-	10 in
Overall Length - With Bucket*	-	-	-	15.75 ft
Reach at Maximum Dump Height*	-	-	-	2.33 ft
Dig Depth	-	-	-	6 in
Maximum Dump Height*	-	-	-	7.5 ft
Load Over Height	-	-	-	9.17 ft
Hinge Pin at Maximum Height	-	-	-	10.08 ft
Departure Angle - Degrees	-	-	-	30°
Overall Length - With Forks	-	-	-	17.08 ft
Reach - Ground Level	-	-	-	2.67 ft
Maximum Reach	-	-	-	4.5 ft
Fork Depth Above Ground	-	-	-	2 in
Fork Height at Maximum Reach	-	-	-	4.67 ft
Maximum Fork Height	-	-	-	9.83 ft
Fork Reach at Maximum Height	-	-	-	2 ft
Turning Radius - Over Bucket*	-	-	-	13.17 ft
Turning Radius - Inside Tire**	-	-	-	5.92 ft
Width - Over Bucket*	-	-	-	5.83 ft
Tire Gauge	-	-	-	4.33 ft
Machine Width**	-	-	-	5.58 ft
Articulation Angle	-	-	-	40°
Steering Angle	-	-	-	80°
Dump Angle at Maximum Height	-	-	-	40°
Note (1)	-	-	-	*Vary with bucket size.
Note (2)	-	-	-	**Vary with tire size.
Note (3)	-	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	-
Wheel Base	14.9 ft	-	-	6.42 ft
Maximum Overall Length	40.7 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	-
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	-
Reach - Maximum Lift	6.8 ft	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Cab Height	-	-	-	8.25 ft
Ground Clearance	-	-	-	10 in
Overall Length - With Bucket*	-	-	-	16.17 ft
Reach at Maximum Dump Height*	-	-	-	2.42 ft
Dig Depth	-	-	-	8 in
Maximum Dump Height*	-	-	-	8 ft
Load Over Height	-	-	-	9.67 ft
Hinge Pin at Maximum Height	-	-	-	10.58 ft
Departure Angle - Degrees	-	-	-	30°
Overall Length - With Forks	-	-	-	17.58 ft
Reach - Ground Level	-	-	-	3.25 ft
Maximum Reach	-	-	-	4.92 ft
Fork Depth Above Ground	-	-	-	2 in
Fork Height at Maximum Reach	-	-	-	4.67 ft
Maximum Fork Height	-	-	-	10.33 ft
Fork Reach at Maximum Height	-	-	-	2 ft
Turning Radius - Over Bucket*	-	-	-	13.42 ft
Turning Radius - Inside Tire**	-	-	-	5.92 ft
Width - Over Bucket*	-	-	-	5.83 ft
Tire Gauge	-	-	-	4.33 ft
Machine Width**	-	-	-	5.58 ft
Articulation Angle	-	-	-	40°
Steering Angle	-	-	-	80°
Dump Angle at Maximum Height	-	-	-	40°
Note (1)	-	-	-	*Vary with bucket size.
Note (2)	-	-	-	**Vary with tire size.
Note (3)	-	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Dimensions - Millyard Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	13.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Fork Tip	16.5 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	41.9 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-
Fork Height with Level Arms	8.1 ft	-	-	-
Fork Top Clamp Opening	13.1 ft	-	-	-
Fork Height at Maximum Lift	17.2 ft	-	-	-
Hinge Pin Height at Maximum Lift	16.1 ft	-	-	-
Dump Angle at Maximum Lift	-39.4 °	-	-	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	-	4.5 s	-	-
Raise	-	8 s	-	-
Dump	-	2.2 s	-	-
Lower Float Down	-	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	18.2 s	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-
Ground to Top of Hood	-	10.9 ft	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	14 ft	-	-
Wheel Base	-	14.9 ft	-	-
Maximum Overall Length	-	39.3 ft	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-
Clearance at Maximum Lift	-	11.9 ft	-	-
B-Pin Height - Maximum Lift	-	18 ft	-	-
Maximum Overall Height - Bucket Raised	-	24.5 ft	-	-
Reach - Maximum Lift	-	6.5 ft	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	14.8 ft	-	-
Ground to Top of Hood	-	10.9 ft	-	-
Rear Axle - Centerline to Bumper	-	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	15.3 ft	-	-
Wheel Base	-	14.9 ft	-	-
Maximum Overall Length	-	40.7 ft	-	-
Ground to Lower Hitch Clearance	-	1.9 ft	-	-
Clearance at Maximum Lift	-	13.3 ft	-	-
B-Pin Height - Maximum Lift	-	19.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	25.8 ft	-	-
Reach - Maximum Lift	-	6.8 ft	-	-
Complete System Fill
Fuel Tank - Standard	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	1414 gal (US)	-
Cooling System	-	-	138 gal (US)	-
Engine Crankcase	-	-	76 gal (US)	-
Transmission	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	20 gal (US)	-
Note	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	119 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	117 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	28.8 ft	-
Clearance at Maximum Lift	-	-	19.8 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	21.9 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	39.3 ft	-
Maximum Overall Length	-	-	64.6 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	-	39.7 degrees	-
Reach - Maximum Lift	-	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	31.6 ft	-
Clearance at Maximum Lift	-	-	22.6 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	24.2 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	42.1 ft	-
Maximum Overall Length	-	-	66.9 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	-	45 degrees	-
Reach - Maximum Lift	-	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Weights
Operating Weight	-	-	-	9414 lb
Buckets
Bucket Capacities	-	-	-	0.6-1.0 m3 (0.8-1.3 yd3)
Bucket Capacities - General Purpose	-	-	-	0.6 m3 (0.8 yd3)
Bucket Capacities - Light Material	-	-	-	1.0 m3 (1.3 yd3)
Hydraulic System
Main Relief	-	-	-	3481 psi
3rd Auxiliary Flow	-	-	-	14 gpm
Hydraulic Cycle Time - Lower, Float	-	-	-	2.4 s
Loader Hydraulic System
Hydraulic Cycle Time - Lift	-	-	-	4.4 s
Hydraulic Cycle Time - Dump	-	-	-	0.7 s
Cab
ROPS	-	-	-	ISO 3471:2008
FOPS	-	-	-	ISO 3449:2005 Level I
Operating Specifications - Standard Lift
Tire Size	-	-	-	33 × 15.5-16.5, 12 PR
Rated Bucket Capacity	-	-	-	0.8 yd³
Breakout Force	-	-	-	6160 lbf
Operating Weight	-	-	-	9414 lb
Rated Operating Load at Full Turn - Bucket***	-	-	-	2701 lb
Straight Tipping Load - Bucket***	-	-	-	6415 lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	-	5401 lb
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	-	5512 lb
Rack Back - Transport Position	-	-	-	51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	-	3366 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	-	2524 lb
Note (1)	-	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)	-	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)	-	-	-	***Manual quick coupler, precleaner hood.
Note (4)	-	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Operating Specifications - High Lift
Tire Size	-	-	-	33 × 15.5-16.5, 12 PR
Rated Bucket Capacity	-	-	-	0.8 yd³
Breakout Force	-	-	-	6204 lbf
Operating Weight	-	-	-	9462 lb
Rated Operating Load at Full Turn - Bucket***	-	-	-	2502 lb
Straight Tipping Load - Bucket***	-	-	-	5975 lb
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	-	5004 lb
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	-	5115 lb
Rack Back - Transport Position	-	-	-	51°
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	-	3148 lb
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	-	2361 lb
Note (1)	-	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
Note (2)	-	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
Note (3)	-	-	-	***Manual quick coupler, precleaner hood.
Note (4)	-	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Maximum Material Densities - General Purpose
Bucket Type	-	-	-	General Purpose
Rated Capacity	-	-	-	0.8 yd³
Dump Height	-	-	-	90 in
Maximum Material Density	-	-	-	3169 lb/yd³
Bucket Width	-	-	-	70 in
Note	-	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Maximum Material Densities - Light Material
Bucket Type	-	-	-	Light Material
Rated Capacity	-	-	-	1.3 yd³
Dump Height	-	-	-	85 in
Maximum Material Density	-	-	-	1989 lb/yd³
Bucket Width	-	-	-	74 in
Note	-	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Sustainability
Recyclability	-	-	-	97%

Compare Equipment Go Back

988 XE Wheel Loader

988 Wheel Loader

995 Wheel Loader

903D Compact Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Hydraulic Cycle Time (1,400-1,860 rpm)

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Buckets

Hydraulic System

Loader Hydraulic System

Cab

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability