CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 XE Wheel Loader
    View Product
    992 Wheel Loader
    View Product Remove
    903D Compact Wheel Loader
    View Product Remove
    950 GC Wheel Loader | Front Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 580 hp - - -
    Engine Model Cat® C18 Cat® C32B Cat C2.4* Cat C7.1
    Rated Speed 1,700 rpm 1750 rpm - -
    Peak Power Speed 1,500 rpm - - -
    Gross Power - SAE J1995:2014 588 hp - - -
    Net Power - SAE J1349:2011 538 hp - - -
    Bore 5.7 in 5.7 in 3.4 in 4.13 in
    Stroke 7.2 in 6.4 in 4 in 5.31 in
    Displacement 1105 in³ 1963.5 in³ 147 in² 428 in³
    Peak Torque - 1,200 rpm 2230 lbf·ft - - -
    Torque Rise 58% - - -
    Note (1) Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. - - -
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. - - -
    Net Power - 814 hp - -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent - Tier 4/Stage V
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 hp - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 hp - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 hp - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 hp - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 hp - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 hp - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 hp - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 hp - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 hp - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 hp - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 hp - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 hp - -
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf - -
    Maximum Gross Power - - 42 hp -
    Gross Power - - 42 hp -
    Net Power - 2,200 rpm - SAE J1349 R-ing - - 40 hp -
    Net Power - 2,200 rpm - ISO 9249 R-ing - - 40 hp -
    Note - - *Engine meets U.S. EPA Tier 4 Final emission standards. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).
    Net Power - ISO 9249 - - - 225 hp
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric - - - 228 hp
    Maximum Power - 1,700 rpm - ISO 14396 - - - 240 hp
    Maximum Power - 1,700 rpm - ISO 14396 - Metric - - - 243 hp
    Peak Gross Torque - 1,400 rpm - SAE J1995 - - - 811 ft·lbf
    Peak Gross Torque - 1,400 rpm - ISO 14396 - - - 805 ft·lbf
    Maximum Net Power - 1,700 rpm - ISO 9249 - - - 225 hp
    Maximum Net Power - 1,700 rpm - SAE J1349 - - - 225 hp
    Maximum Power - 1,700 rpm - SAE J1995 - - - 241 hp

    Operating Specifications
    Operating Weight 116362 lb 233430 lb - -
    Bucket Capacity Range 4.7-13 m3 (6.2-17 yd3) 11.5-24.5 m³ (15-32 yd³) - -
    Rated Payload - Quarry Face 12.5 t - - -
    Rated Payload - Loose Material 16 t - - -
    Rated Payload - Standard - 25.5 ton (US) - -
    Rated Payload - Standard (Material Handler) - 30 ton (US) - -
    Rated Payload - High Lift - 22.5 ton (US) - -
    Rated Payload - High Lift (Material Handler) - 27 ton (US) - -
    Cat Truck Match - Standard - 775/777 - -
    Cat Truck Match - High Lift - 785 - -

    Transmission
    Transmission Type Cat switched reluctance electric drive Cat Planetary Powershift - -
    Forward 1 (virtual) 4.3 mile/h - - -
    Forward 2 (virtual) 7 mile/h - - -
    Forward 3 (virtual) 13.8 mile/h - - -
    Forward 4 (virtual) 20 mile/h - - -
    Reverse 1 (virtual) 4.3 mile/h - - -
    Reverse 2 (virtual) 7 mile/h - - -
    Reverse 3 (virtual) 17.5 mile/h - - -
    Forward - 1 - 4.3 mile/h - 4.5 mile/h
    Forward - 2 - 7.4 mile/h - 8 mile/h
    Forward - 3 - 12.7 mile/h - 14.2 mile/h
    Direct Drive - Forward 1 - Disabled - -
    Direct Drive - Forward 2 - 8 mile/h - -
    Direct Drive - Forward 3 - 14 mile/h - -
    Reverse - 1 - 4.7 mile/h - 4.5 mile/h
    Reverse - 2 - 8.1 mile/h - 8 mile/h
    Reverse - 3 - 13.9 mile/h - 14.2 mile/h
    Direct Drive - Reverse 1 - 5 mile/h - -
    Direct Drive - Reverse 2 - 8.8 mile/h - -
    Direct Drive - Reverse 3 - 15.3 mile/h - -
    Travel Speed - - 12.4 mile/h -
    Note - - - Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.
    Forward - 4 - - - 22.4 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH-Positive Flow Control, Flow Sharing Positive Flow Control - -
    Lift/Tilt System - Pump Variable displacement piston Variable Displacement Piston - -
    Maximum Flow at 1,400-1,600 rpm 153 gpm - - -
    Relief Valve Setting - Lift/Tilt 4757 psi 5000 psi - -
    Lift Cylinder - Bore 8.7 in 9.3 in - -
    Lift Cylinder - Stroke 41.3 in 63.5 in - -
    Tilt Cylinder - Bore 8.7 in 11.5 in - -
    Tilt Cylinder - Stroke 27 in 41.5 in - -
    Maximum Flow at 2,165 rpm - 250 gpm - -

    Hydraulic Cycle Times
    Rack Back 4.5 s 2.3 s - -
    Raise 8 s 9 s - -
    Dump 2.2 s 2.6 s - -
    Lower Float Down 3.5 s - - -
    Total Hydraulic Cycle Time 18.2 s 17.1 s - -
    Rack Back - High Lift - 2.3 s - -
    Raise - High Lift - 9 s - -
    Dump - High Lift - 2.6 s - -
    Float Down - 3.2 s - -
    Float Down - High Lift - 3.2 s - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Pilot, Load Sensing - -
    Steering System - Pump Piston, variable displacement Piston, Variable Displacement - -
    Maximum Flow at 1,400-1,600 rpm 71.3 gpm - - -
    Steering Cut Off Pressure 4351 psi 4500 psi - -
    Total Steering Angle 86° 80° - -
    Steering Cycle Times - High Idle 3.4 s 3.1 s - -
    Steering Cycle Times - Low Idle 5.6 s 4.9 s - -
    Maximum Flow at 1,400-1,850 rpm - 70 gpm - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con - - -

    Axles
    Front Fixed Fixed - -
    Rear Trunnion Trunnion - -
    Oscillation Angle 13° ±9° - -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 - -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 109 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 110 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Service Refill Capacities
    Fuel Tank 147 gal (US) 385.7 gal (US) 11.4 gal (US) -
    Cooling System - Jacket Water 30 gal (US) - - -
    Cooling Systems - Power Train 8 gal (US) - - -
    Engine Crankcase 16 gal (US) - - -
    Diesel Exhaust Fluid Tank 8.7 gal (US) - - -
    Transmission 16 gal (US) 51.5 gal (US) - 11.9 gal (US)
    Differential - Final Drives - Front 49 gal (US) 96.4 gal (US) - 10.6 gal (US)
    Differential - Final Drives - Rear 49 gal (US) 96.4 gal (US) - 10 gal (US)
    Hydraulic System - Implement/Steering 126 gal (US) - - -
    Note Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20% - - -
    Cooling Systems - 59.4 gal (US) - -
    Crankcase - 31.7 gal (US) - 4.8 gal (US)
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) - -
    Hydraulic Tank - Implement - 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) - -
    Cooling System - - 3 gal (US) 13.2 gal (US)
    Hydraulic System - - 6.3 gal (US) -
    Engine Oil - - 2.4 gal (US) -
    DEF Tank - - - 4.2 gal (US)
    Fuel Tank Size - - - 76.6 gal (US)
    Hydraulic Tank - - - 29.6 gal (US)

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 14 ft - - -
    Wheel Base 14.9 ft - 6.42 ft -
    Maximum Overall Length 39.3 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Axles 3.2 ft - - -
    Clearance at Maximum Lift 11.9 ft - - -
    B-Pin Height - Maximum Lift 18 ft - - -
    Maximum Overall Height - Bucket Raised 24.5 ft - - -
    Reach - Maximum Lift 6.5 ft - - -
    Note Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - - -
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Overall Length - With Bucket* - - 15.75 ft -
    Reach at Maximum Dump Height* - - 2.33 ft -
    Dig Depth - - 6 in -
    Maximum Dump Height* - - 7.5 ft -
    Load Over Height - - 9.17 ft -
    Hinge Pin at Maximum Height - - 10.08 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.08 ft -
    Reach - Ground Level - - 2.67 ft -
    Maximum Reach - - 4.5 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 9.83 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.17 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 15.3 ft - - -
    Wheel Base 14.9 ft - 6.42 ft -
    Maximum Overall Length 40.7 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Axles 3.2 ft - - -
    Clearance at Maximum Lift 13.3 ft - - -
    B-Pin Height - Maximum Lift 19.3 ft - - -
    Maximum Overall Height - Bucket Raised 25.8 ft - - -
    Reach - Maximum Lift 6.8 ft - - -
    Note Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - - -
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Overall Length - With Bucket* - - 16.17 ft -
    Reach at Maximum Dump Height* - - 2.42 ft -
    Dig Depth - - 8 in -
    Maximum Dump Height* - - 8 ft -
    Load Over Height - - 9.67 ft -
    Hinge Pin at Maximum Height - - 10.58 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.58 ft -
    Reach - Ground Level - - 3.25 ft -
    Maximum Reach - - 4.92 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 10.33 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.42 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 13.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Fork Tip 16.5 ft - - -
    Wheel Base 14.9 ft - - -
    Maximum Overall Length 41.9 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Front Axle 3.2 ft - - -
    Fork Height with Level Arms 8.1 ft - - -
    Fork Top Clamp Opening 13.1 ft - - -
    Fork Height at Maximum Lift 17.2 ft - - -
    Hinge Pin Height at Maximum Lift 16.1 ft - - -
    Dump Angle at Maximum Lift -39.4 ° - - -

    Buckets
    Bucket Capacities - 11.5-24.5 m³ (15-32 yd³) 0.6-1.0 m3 (0.8-1.3 yd3) 2.9-4.4 m³ (3.75-5.75 yd³)
    Bucket Capacities - General Purpose - - 0.6 m3 (0.8 yd3) -
    Bucket Capacities - Light Material - - 1.0 m3 (1.3 yd3) -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F - -

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) - -

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) - -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft - -
    Ground to Top of ROPS - 18.3 ft - -
    Ground to Top of Hood - 13.1 ft - -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft - -
    Ground to Lower Hitch Clearance - 2.2 ft - -
    Reach - Maximum Lift - 8.2 ft - -
    Clearance at Maximum Lift - 15.2 ft - -
    B-Pin Height - Maximum Lift - 22.8 ft - -
    Maximum Overall Height - Bucket Raised - 30.8 ft - -
    Rear Axle - Centerline to Bumper - 13.5 ft - -
    Tread Width - 10.83 ft - -
    Rack Back Angle - Maximum Lift - 56.9 degrees - -
    Dump Angle at Maximum Lift - -49.5 degrees - -
    Rack Back Angle - Ground Level - 40.2 degrees - -
    Width - Over Tires - With Bulge - 14.74 ft - -
    Rack Back Angle - Carry - 48.9 degrees - -
    Wheel Base - 19.3 ft - -
    Maximum Overall Length - 50.8 ft - -
    Front Axle Centerline to Bucket Tip - 18 ft - -

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft - -
    Rack Back Angle - Ground Level - 42.5 degrees - -
    Dump Angle at Maximum Lift - -48.1 degrees - -
    Rack Back Angle - Maximum Lift - 56.2 degrees - -
    Width - Over Tires - With Bulge - 14.75 ft - -
    Rack Back Angle - Carry - 51.6 degrees - -
    Ground to Top of Exhaust Stacks - 17 ft - -
    Ground to Top of ROPS - 18.3 ft - -
    Ground to Top of Hood - 13.1 ft - -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft - -
    Ground to Lower Hitch Clearance - 2.2 ft - -
    Reach - Maximum Lift - 7.6 ft - -
    Clearance at Maximum Lift - 17.2 ft - -
    B-Pin Height - Maximum Lift - 24.5 ft - -
    Maximum Overall Height - Bucket Raised - 32 ft - -
    Rear Axle - Centerline to Bumper - 13.5 ft - -
    Wheel Base - 19.3 ft - -
    Maximum Overall Length - 51.6 ft - -
    Front Axle Centerline to Bucket Tip - 18.8 ft - -

    Weights
    Operating Weight - - 9414 lb 41554 lb

    Hydraulic System
    Main Relief - - 3481 psi -
    3rd Auxiliary Flow - - 14 gpm -
    Hydraulic Cycle Time - Lower, Float - - 2.4 s -
    Hydraulic Cycle Time - Total Cycle Time - - - 9.4 s
    Steering System - Pump Type - - - Piston
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) - - - 4047 psi
    Implement System - Maximum Pump Output at 2,390 rpm - - - 68 gpm

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift - - 4.4 s -
    Hydraulic Cycle Time - Dump - - 0.7 s -

    Cab
    ROPS - - ISO 3471:2008 -
    FOPS - - ISO 3449:2005 Level I -

    Operating Specifications - Standard Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6160 lbf -
    Operating Weight - - 9414 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2701 lb -
    Straight Tipping Load - Bucket*** - - 6415 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5401 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5512 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3366 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2524 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Operating Specifications - High Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6204 lbf -
    Operating Weight - - 9462 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2502 lb -
    Straight Tipping Load - Bucket*** - - 5975 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5004 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5115 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3148 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2361 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Maximum Material Densities - General Purpose
    Bucket Type - - General Purpose -
    Rated Capacity - - 0.8 yd³ -
    Dump Height - - 90 in -
    Maximum Material Density - - 3169 lb/yd³ -
    Bucket Width - - 70 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -

    Maximum Material Densities - Light Material
    Bucket Type - - Light Material -
    Rated Capacity - - 1.3 yd³ -
    Dump Height - - 85 in -
    Maximum Material Density - - 1989 lb/yd³ -
    Bucket Width - - 74 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -

    Sustainability
    Recyclability - - 97% -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) - - - 76 dB(A)*
    Note (1) - - - *Distance of 15 m (49.2 ft), moving forward in second gear ratio.
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) - - - European Union Directive "2000/14/EC" as amended by "2005/88/EC."
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** - - - 73 dB(A)
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) - - - For machines in European Union countries and in countries that adopt the EU Directives
    With Cooling Fan Speed at Maximum Value - Note - - - Distance of 15 m (49.2 ft), moving forward in second gear ratio.
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** - - - 107 LWA***
    Note (3) - - - ***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
    Note (2) - - - **For machines in European Union countries and in countries that adopt the "EU Directives."
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - - 73 dB(A)
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) - - - 109 dB(A)

    Dimensions
    Rack Back - Ground - - - 40 degrees
    Height - Top of Exhaust Pipe - - - 11.17 ft
    Centerline of Rear Axle to Hitch - - - 5.42 ft
    Lift Arm Clearance - - - 12 ft
    B-Pin Height - - - 13.75 ft
    Centerline of Rear Axle to Edge of Counterweight - - - 6.75 ft
    Ground Clearance - - - 1.5 ft
    Rack Back - Maximum Lift - - - 60 degrees
    Height - Top of Hood - - - 8.75 ft
    Wheel Base - - - 10.83 ft
    Height - Top of ROPS - - - 11.33 ft
    Rack Back - Carry - - - 45 degrees
    Note - - - All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.

    Weights and Operating Specifications
    Note (2) - - - *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Tipping Load - Full Turn - Rigid Tires** - - - 25875 lb
    Breakout Force - - - 34638 lbf
    Tipping Load - Full Turn - ISO 14397-1* - - - 24264 lb
    Note (3) - - - **Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
    Operating Weight - - - 41554 lb
    Note (1) - - - For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound

    Engine - Tier 4 Final/Stage IV
    Emissions - - - Tier 4/Stage IV
    Add a Similar Product: