CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 XE Wheel Loader
    View Product
    910 Compact Wheel Loader
    View Product Remove
    903D Compact Wheel Loader
    View Product Remove
    914 Compact Wheel Loader
    View Product Remove

    Engine
    Engine Power - ISO 14396:2002 580 hp - - -
    Engine Model Cat® C18 Cat C3.6 Cat C2.4* Cat C3.6
    Rated Speed 1,700 rpm - - -
    Peak Power Speed 1,500 rpm - - -
    Gross Power - SAE J1995:2014 588 hp - - -
    Net Power - SAE J1349:2011 538 hp - - -
    Bore 5.7 in 3.85 in 3.4 in 3.85 in
    Stroke 7.2 in 4.72 in 4 in 4.72 in
    Displacement 1105 in³ 220 in³ 147 in² 220 in³
    Peak Torque - 1,200 rpm 2230 lbf·ft - - -
    Torque Rise 58% - - -
    Note (1) Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. - - -
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. - - -
    Maximum Gross Power - 110 hp 42 hp 110 hp
    Rated Net Power - Rated Engine Speed - 2200 r/min - 2200 r/min
    Maximum Gross Power - Rated Engine Speed - 1800 r/min - 1800 r/min
    Rated Net Power - SAE J1349 - 99 hp - 99 hp
    Maximum Gross Power - ISO 14396 (metric) - 112 hp - 112 hp
    Rated Net Power - ISO 9249 - 98 hp - 98 hp
    Maximum Gross Torque - SAE J1995 - 335 ft·lbf - 335 ft·lbf
    Maximum Gross Torque - ISO 14396 - 332 ft·lbf - 332 ft·lbf
    Maximum Net Torque - SAE J1349 - 329 ft·lbf - 329 ft·lbf
    Maximum Net Torque - ISO 9249 - 327 ft·lbf - 327 ft·lbf
    Emissions - Engine meets Tier 4 Final/Stage V emission standards. - Engine meets Tier 4 Final/Stage V emission standards.
    Note - Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. *Engine meets U.S. EPA Tier 4 Final emission standards. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Gross Power - ISO 14396 - 110 hp - 110 hp
    Gross Power - - 42 hp -
    Net Power - 2,200 rpm - SAE J1349 R-ing - - 40 hp -
    Net Power - 2,200 rpm - ISO 9249 R-ing - - 40 hp -

    Operating Specifications
    Operating Weight 116362 lb - - -
    Bucket Capacity Range 4.7-13 m3 (6.2-17 yd3) - - -
    Rated Payload - Quarry Face 12.5 t - - -
    Rated Payload - Loose Material 16 t - - -

    Transmission
    Transmission Type Cat switched reluctance electric drive - - -
    Forward 1 (virtual) 4.3 mile/h - - -
    Forward 2 (virtual) 7 mile/h - - -
    Forward 3 (virtual) 13.8 mile/h - - -
    Forward 4 (virtual) 20 mile/h - - -
    Reverse 1 (virtual) 4.3 mile/h - - -
    Reverse 2 (virtual) 7 mile/h - - -
    Reverse 3 (virtual) 17.5 mile/h - - -
    Note - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    Forward and Reverse - Speed Range 3 - 25 mile/h - 25 mile/h
    Forward and Reverse - Speed Range 2* - 12.5 mile/h - 12.5 mile/h
    Forward and Reverse - Speed Range 1* - 6.3 mile/h - 6.3 mile/h
    Travel Speed - - 12.4 mile/h -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH-Positive Flow Control, Flow Sharing - - -
    Lift/Tilt System - Pump Variable displacement piston - - -
    Maximum Flow at 1,400-1,600 rpm 153 gpm - - -
    Relief Valve Setting - Lift/Tilt 4757 psi - - -
    Lift Cylinder - Bore 8.7 in - - -
    Lift Cylinder - Stroke 41.3 in - - -
    Tilt Cylinder - Bore 8.7 in - - -
    Tilt Cylinder - Stroke 27 in - - -

    Hydraulic Cycle Times
    Rack Back 4.5 s - - -
    Raise 8 s - - -
    Dump 2.2 s - - -
    Lower Float Down 3.5 s - - -
    Total Hydraulic Cycle Time 18.2 s - - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing - - -
    Steering System - Pump Piston, variable displacement - - -
    Maximum Flow at 1,400-1,600 rpm 71.3 gpm - - -
    Steering Cut Off Pressure 4351 psi - - -
    Total Steering Angle 86° - - -
    Steering Cycle Times - High Idle 3.4 s - - -
    Steering Cycle Times - Low Idle 5.6 s - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con - - -

    Axles
    Front Fixed Fixed; Locking differential (standard) - Fixed; Locking differential (standard)
    Rear Trunnion Oscillating ±11 degrees; Locking differential (Standard) - Oscillating ±11 degrees; Locking differential (Standard)
    Oscillation Angle 13° - - -

    Brakes
    Brakes ISO 3450:2011 - - -

    Operator's Cab
    ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - - -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 109 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 109 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008) 110 dB(A) - - -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - - -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - - -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives” - - -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701 - - -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - - -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - - -

    Service Refill Capacities
    Fuel Tank 147 gal (US) 43.6 gal (US) 11.4 gal (US) 43.6 gal (US)
    Cooling System - Jacket Water 30 gal (US) - - -
    Cooling Systems - Power Train 8 gal (US) - - -
    Engine Crankcase 16 gal (US) 2.6 gal (US) - 2.6 gal (US)
    Diesel Exhaust Fluid Tank 8.7 gal (US) - - -
    Transmission 16 gal (US) 0.8 gal (US) - 0.8 gal (US)
    Differential - Final Drives - Front 49 gal (US) - - -
    Differential - Final Drives - Rear 49 gal (US) - - -
    Hydraulic System - Implement/Steering 126 gal (US) - - -
    Note Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20% DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Cooling System - 5.7 gal (US) 3 gal (US) 5.7 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - 4.8 gal (US) - 4.8 gal (US)
    Hydraulic System - Including Tank - 25.9 gal (US) - 25.9 gal (US)
    Hydraulic Tank - 14.5 gal (US) - 14.5 gal (US)
    Axles - Front Center Differential - 2 gal (US) - 2 gal (US)
    Axles - Rear Center Differential - 2 gal (US) - 2 gal (US)
    Hydraulic System - - 6.3 gal (US) -
    Engine Oil - - 2.4 gal (US) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 14 ft - - -
    Wheel Base 14.9 ft - 6.42 ft -
    Maximum Overall Length 39.3 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Axles 3.2 ft - - -
    Clearance at Maximum Lift 11.9 ft - - -
    B-Pin Height - Maximum Lift 18 ft - - -
    Maximum Overall Height - Bucket Raised 24.5 ft - - -
    Reach - Maximum Lift 6.5 ft - - -
    Note Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - - -
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Overall Length - With Bucket* - - 15.75 ft -
    Reach at Maximum Dump Height* - - 2.33 ft -
    Dig Depth - - 6 in -
    Maximum Dump Height* - - 7.5 ft -
    Load Over Height - - 9.17 ft -
    Hinge Pin at Maximum Height - - 10.08 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.08 ft -
    Reach - Ground Level - - 2.67 ft -
    Maximum Reach - - 4.5 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 9.83 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.17 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 14.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Bucket Tip 15.3 ft - - -
    Wheel Base 14.9 ft - 6.42 ft -
    Maximum Overall Length 40.7 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Axles 3.2 ft - - -
    Clearance at Maximum Lift 13.3 ft - - -
    B-Pin Height - Maximum Lift 19.3 ft - - -
    Maximum Overall Height - Bucket Raised 25.8 ft - - -
    Reach - Maximum Lift 6.8 ft - - -
    Note Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - - -
    Cab Height - - 8.25 ft -
    Ground Clearance - - 10 in -
    Overall Length - With Bucket* - - 16.17 ft -
    Reach at Maximum Dump Height* - - 2.42 ft -
    Dig Depth - - 8 in -
    Maximum Dump Height* - - 8 ft -
    Load Over Height - - 9.67 ft -
    Hinge Pin at Maximum Height - - 10.58 ft -
    Departure Angle - Degrees - - 30° -
    Overall Length - With Forks - - 17.58 ft -
    Reach - Ground Level - - 3.25 ft -
    Maximum Reach - - 4.92 ft -
    Fork Depth Above Ground - - 2 in -
    Fork Height at Maximum Reach - - 4.67 ft -
    Maximum Fork Height - - 10.33 ft -
    Fork Reach at Maximum Height - - 2 ft -
    Turning Radius - Over Bucket* - - 13.42 ft -
    Turning Radius - Inside Tire** - - 5.92 ft -
    Width - Over Bucket* - - 5.83 ft -
    Tire Gauge - - 4.33 ft -
    Machine Width** - - 5.58 ft -
    Articulation Angle - - 40° -
    Steering Angle - - 80° -
    Dump Angle at Maximum Height - - 40° -
    Note (1) - - *Vary with bucket size. -
    Note (2) - - **Vary with tire size. -
    Note (3) - - Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS 13.8 ft - - -
    Ground to Top of Exhaust Stacks 13.8 ft - - -
    Ground to Top of Hood 10.9 ft - - -
    Ground to Bumper Clearance 3.1 ft - - -
    Rear Axle - Centerline to Bumper 10.5 ft - - -
    Front Axle Centerline to Fork Tip 16.5 ft - - -
    Wheel Base 14.9 ft - - -
    Maximum Overall Length 41.9 ft - - -
    Ground to Lower Hitch Clearance 1.9 ft - - -
    Ground to Center of Front Axle 3.2 ft - - -
    Fork Height with Level Arms 8.1 ft - - -
    Fork Top Clamp Opening 13.1 ft - - -
    Fork Height at Maximum Lift 17.2 ft - - -
    Hinge Pin Height at Maximum Lift 16.1 ft - - -
    Dump Angle at Maximum Lift -39.4 ° - - -

    Weights
    Operating Weight - 18102 lb 9414 lb 19103 lb

    Buckets
    Bucket Capacities - 1.3-3.5 m3 (1.7-4.6 yd3) 0.6-1.0 m3 (0.8-1.3 yd3) 1.3-3.5 m3 (1.7-4.6 yd3)
    Bucket Capacities - General Purpose - 1.3-1.9 m³ (1.7-2.5 yd³) 0.6 m3 (0.8 yd3) 1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material - 2.5-3.5 m³ (3.3-4.6 yd³) 1.0 m3 (1.3 yd3) 2.5-3.5 m³ (3.3-4.6 yd³)

    Sustainability
    Recyclability - 95% 97% 95%

    Cab
    ROPS - ISO 3471:2008 ISO 3471:2008 ISO 3471:2008
    FOPS - ISO 3449:2005 ISO 3449:2005 Level I ISO 3449:2005
    Note (2) - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (3) - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (1) - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4) - *The measurements were conducted with the cab doors and windows closed. - *The measurements were conducted with the cab doors and windows closed.

    Steering
    Maximum Working Pressure - Steering Pump - 2683 psi - 3263 psi
    Steering Articulation Angle - Each Direction - 40 ° - 40 °
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - 3.2 s - 2.8 s
    Maximum Flow - Steering Pump - 17 gpm - 22 gpm
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.75 turns - 3.75 turns

    Loader Hydraulic System
    Hydraulic Cycle Time - Dump, at Maximum Reach - 1.4 s - 1.4 s
    Hydraulic Cycle Time - Total Cycle Time - 12.5 s - 12.5 s
    Maximum Working Pressure - Implement Pump - 3408 psi - 4061 psi
    Relief Pressure - Tilt Cylinder - 4931 psi - 4931 psi
    Hydraulic Cycle Time - Rackback - 2.2 s - 2.2 s
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure - 3046 psi - 3046 psi
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - 5.2 s - 5.2 s
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure - 3046 psi - 3046 psi
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow - 24 gpm - 24 gpm
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow - 24 gpm - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - 3.7 s - 3.7 s
    Maximum Flow - Implement Pump - 32 gpm - 39 gpm
    Hydraulic Cycle Time - Lift - - 4.4 s -
    Hydraulic Cycle Time - Dump - - 0.7 s -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard - - - 24 gpm
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High - - - 32 gpm

    Tires
    Note (2) - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Standard Size - 15.5 R25 L2 XTLA - 17.5 R25 L2 XTLA
    Other Choices Include - 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow - 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
    Note (3) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (1) - Other tire choices are available. Contact your Cat dealer for details. - Other tire choices are available. Contact your Cat dealer for details.

    Hydraulic System
    Main Relief - - 3481 psi -
    3rd Auxiliary Flow - - 14 gpm -
    Hydraulic Cycle Time - Lower, Float - - 2.4 s -

    Operating Specifications - Standard Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6160 lbf -
    Operating Weight - - 9414 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2701 lb -
    Straight Tipping Load - Bucket*** - - 6415 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5401 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5512 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3366 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2524 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Operating Specifications - High Lift
    Tire Size - - 33 × 15.5-16.5, 12 PR -
    Rated Bucket Capacity - - 0.8 yd³ -
    Breakout Force - - 6204 lbf -
    Operating Weight - - 9462 lb -
    Rated Operating Load at Full Turn - Bucket*** - - 2502 lb -
    Straight Tipping Load - Bucket*** - - 5975 lb -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** - - 5004 lb -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** - - 5115 lb -
    Rack Back - Transport Position - - 51° -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** - - 3148 lb -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** - - 2361 lb -
    Note (1) - - *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. -
    Note (2) - - **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. -
    Note (3) - - ***Manual quick coupler, precleaner hood. -
    Note (4) - - Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. -

    Maximum Material Densities - General Purpose
    Bucket Type - - General Purpose -
    Rated Capacity - - 0.8 yd³ -
    Dump Height - - 90 in -
    Maximum Material Density - - 3169 lb/yd³ -
    Bucket Width - - 70 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -

    Maximum Material Densities - Light Material
    Bucket Type - - Light Material -
    Rated Capacity - - 1.3 yd³ -
    Dump Height - - 85 in -
    Maximum Material Density - - 1989 lb/yd³ -
    Bucket Width - - 74 in -
    Note - - Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. -
    Add a Similar Product: