Compare

Compare Equipment Go Back

Engine
	988 XE Wheel Loader View Product	903D Compact Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	988 GC Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	580 hp	-	-	-
Engine Model	Cat® C18	Cat C2.4*	Cat® 3516E	Cat® C15
Rated Speed	1,700 rpm	-	-	2000 rpm
Peak Power Speed	1,500 rpm	-	-	1600 rpm
Gross Power - SAE J1995:2014	588 hp	-	1870 hp	456 hp
Net Power - SAE J1349:2011	538 hp	-	-	448 hp
Bore	5.7 in	3.4 in	6.7 in	5.4 in
Stroke	7.2 in	4 in	8.5 in	6.75 in
Displacement	1105 in³	147 in²	4766 in³	927 in³
Peak Torque - 1,200 rpm	2230 lbf·ft	-	-	-
Torque Rise	58%	-	39%	16%
Note (1)	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	The power ratings apply when tested under the reference conditions for the specified standard.	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Maximum Gross Power	-	42 hp	-	-
Gross Power	-	42 hp	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	40 hp	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	40 hp	-	-
Note	-	*Engine meets U.S. EPA Tier 4 Final emission standards.	-	-
Emissions	-	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	-
Engine Power - ISO 14396	-	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	8549 lb/ft	-
Note (3)	-	-	The gross power advertised is with the fan at maximum speed.	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	1778 lbf·ft
Operating Specifications
Operating Weight	116362 lb	-	-	112426 lb
Bucket Capacity Range	4.7-13 m3 (6.2-17 yd3)	-	17.2-43.6 m3 (22.3-57 yd3)	6.4-7.6 m3 (8.3-10 yd3)
Rated Payload - Quarry Face	12.5 t	-	-	12.5 ton (US)
Rated Payload - Loose Material	16 t	-	-	-
Operating Weight - Standard	-	-	543772 lb	-
Operating Weight - High Lift	-	-	547675 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	50 ton (US)	-
Note	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Cat Truck Match - Standard	-	-	785/789	-
Cat Truck Match - High Lift	-	-	789/793/794	772/773/775
Transmission
Transmission Type	Cat switched reluctance electric drive	-	Cat Planetary Power Shift	Cat planetary power shift
Forward 1 (virtual)	4.3 mile/h	-	-	-
Forward 2 (virtual)	7 mile/h	-	-	-
Forward 3 (virtual)	13.8 mile/h	-	-	-
Forward 4 (virtual)	20 mile/h	-	-	-
Reverse 1 (virtual)	4.3 mile/h	-	-	-
Reverse 2 (virtual)	7 mile/h	-	-	-
Reverse 3 (virtual)	17.5 mile/h	-	-	-
Travel Speed	-	12.4 mile/h	-	-
Forward - 1	-	-	4.6 mile/h	5 mile/h
Forward - 2	-	-	8 mile/h	8 mile/h
Forward - 3	-	-	13.6 mile/h	-
Reverse - 1	-	-	5 mile/h	5 mile/h
Reverse - 2	-	-	8.8 mile/h	8 mile/h
Reverse - 3	-	-	14.9 mile/h	-
Direct Drive - Forward 1	-	-	Lock-up disables	Lock-up disabled
Direct Drive - Forward 2	-	-	8.7 mile/h	8 mile/h
Direct Drive - Forward 3	-	-	15.2 mile/h	14 mile/h
Direct Drive - Reverse 1	-	-	Lock-up disables	Lock-up disabled
Direct Drive - Reverse 2	-	-	9.6 mile/h	9 mile/h
Direct Drive - Reverse 3	-	-	16.8 mile/h	16 mile/h
Note	-	-	Travel speeds based on 58/85-57 tires.	Travel speeds based on 35/65-R33 tires.
Direct Drive - Forward 4	-	-	-	24 mile/h
Direct Drive - Reverse 4	-	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH-Positive Flow Control, Flow Sharing	-	Positive Flow Control	EH - Load Sense
Lift/Tilt System - Pump	Variable displacement piston	-	Variable Displacement Piston	Variable displacement piston
Maximum Flow at 1,400-1,600 rpm	153 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4757 psi	-	5004 psi	4598 psi
Lift Cylinder - Bore	8.7 in	-	-	-
Lift Cylinder - Stroke	41.3 in	-	-	-
Tilt Cylinder - Bore	8.7 in	-	-	-
Tilt Cylinder - Stroke	27 in	-	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	541 gpm	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	370 × 1713 mm (14.6 × 67.4 in)	190 mm x 1216 mm (7.5 in x 48 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	310 × 1086 mm (12.2 × 42.8 in)	170 mm x 722 mm (6.7 in x 28.4 in)
Pilot System	-	-	Open Loop and Pressure Reducing	Variable displacement piston
Maximum Flow at 2,165 rpm	-	-	-	159 gpm
Relief Valve Setting	-	-	-	500 psi
Hydraulic Cycle Times
Rack Back	4.5 s	-	4.9 s	3.8 s
Raise	8 s	-	12.6 s	7.5 s
Dump	2.2 s	-	3.1 s	3 s
Lower Float Down	3.5 s	-	4.2 s	4.6 s
Total Hydraulic Cycle Time	18.2 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	-	18.9 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	-	Pilot, Load Sensing	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	-	Piston, Variable Displacement	Piston, variable displacement
Maximum Flow at 1,400-1,600 rpm	71.3 gpm	-	-	-
Steering Cut Off Pressure	4351 psi	-	-	-
Total Steering Angle	86°	-	80 degrees	70°
Steering Cycle Times - High Idle	3.4 s	-	4.3 s	3 s
Steering Cycle Times - Low Idle	5.6 s	-	7.6 s	5.2 s
Maximum Flow at 2,165 rpm	-	-	-	52 gpm
Relief Valve Setting - Steering	-	-	-	4000 psi
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
Front	Fixed	-	Fixed	Fixed
Rear	Trunnion	-	Trunnion	Trunnion
Oscillation Angle	13°	-	9°	+/-12.5°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011
Operator's Cab
ROPS/FOPS	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)	109 dB(A)	-	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	109 dB(A)	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	74 dB(A)
Machine Sound Power Level (ISO 6395:2008)	110 dB(A)	-	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities
Fuel Tank	147 gal (US)	11.4 gal (US)	-	141 gal (US)
Cooling System - Jacket Water	30 gal (US)	-	-	-
Cooling Systems - Power Train	8 gal (US)	-	-	-
Engine Crankcase	16 gal (US)	-	-	9 gal (US)
Diesel Exhaust Fluid Tank	8.7 gal (US)	-	-	5.5 gal (US)
Transmission	16 gal (US)	-	-	20 gal (US)
Differential - Final Drives - Front	49 gal (US)	-	-	49 gal (US)
Differential - Final Drives - Rear	49 gal (US)	-	-	45 gal (US)
Hydraulic System - Implement/Steering	126 gal (US)	-	-	-
Note	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%	-	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10
Cooling System	-	3 gal (US)	-	27 gal (US)
Hydraulic System	-	6.3 gal (US)	-	-
Engine Oil	-	2.4 gal (US)	-	-
Hydraulic System Factory Fill	-	-	-	94 gal (US)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	14.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	14 ft	-	-	-
Wheel Base	14.9 ft	6.42 ft	-	-
Maximum Overall Length	39.3 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Ground to Center of Axles	3.2 ft	-	-	-
Clearance at Maximum Lift	11.9 ft	-	-	-
B-Pin Height - Maximum Lift	18 ft	-	-	-
Maximum Overall Height - Bucket Raised	24.5 ft	-	-	-
Reach - Maximum Lift	6.5 ft	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	-
Cab Height	-	8.25 ft	-	-
Ground Clearance	-	10 in	-	-
Overall Length - With Bucket*	-	15.75 ft	-	-
Reach at Maximum Dump Height*	-	2.33 ft	-	-
Dig Depth	-	6 in	-	-
Maximum Dump Height*	-	7.5 ft	-	-
Load Over Height	-	9.17 ft	-	-
Hinge Pin at Maximum Height	-	10.08 ft	-	-
Departure Angle - Degrees	-	30°	-	-
Overall Length - With Forks	-	17.08 ft	-	-
Reach - Ground Level	-	2.67 ft	-	-
Maximum Reach	-	4.5 ft	-	-
Fork Depth Above Ground	-	2 in	-	-
Fork Height at Maximum Reach	-	4.67 ft	-	-
Maximum Fork Height	-	9.83 ft	-	-
Fork Reach at Maximum Height	-	2 ft	-	-
Turning Radius - Over Bucket*	-	13.17 ft	-	-
Turning Radius - Inside Tire**	-	5.92 ft	-	-
Width - Over Bucket*	-	5.83 ft	-	-
Tire Gauge	-	4.33 ft	-	-
Machine Width**	-	5.58 ft	-	-
Articulation Angle	-	40°	-	-
Steering Angle	-	80°	-	-
Dump Angle at Maximum Height	-	40°	-	-
Note (1)	-	*Vary with bucket size.	-	-
Note (2)	-	**Vary with tire size.	-	-
Note (3)	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.8 ft	-	-	13.5 ft
Ground to Top of Exhaust Stacks	14.8 ft	-	-	13.3 ft
Ground to Top of Hood	10.9 ft	-	-	10.7 ft
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	10.3 ft
Front Axle Centerline to Bucket Tip	15.3 ft	-	-	16.7 ft
Wheel Base	14.9 ft	6.42 ft	-	12.5 ft
Maximum Overall Length	40.7 ft	-	-	39.5 ft
Ground to Lower Hitch Clearance	1.9 ft	-	-	1.5 ft
Ground to Center of Axles	3.2 ft	-	-	-
Clearance at Maximum Lift	13.3 ft	-	-	-
B-Pin Height - Maximum Lift	19.3 ft	-	-	18.7 ft
Maximum Overall Height - Bucket Raised	25.8 ft	-	-	25 ft
Reach - Maximum Lift	6.8 ft	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
Cab Height	-	8.25 ft	-	-
Ground Clearance	-	10 in	-	-
Overall Length - With Bucket*	-	16.17 ft	-	-
Reach at Maximum Dump Height*	-	2.42 ft	-	-
Dig Depth	-	8 in	-	-
Maximum Dump Height*	-	8 ft	-	-
Load Over Height	-	9.67 ft	-	-
Hinge Pin at Maximum Height	-	10.58 ft	-	-
Departure Angle - Degrees	-	30°	-	-
Overall Length - With Forks	-	17.58 ft	-	-
Reach - Ground Level	-	3.25 ft	-	-
Maximum Reach	-	4.92 ft	-	-
Fork Depth Above Ground	-	2 in	-	-
Fork Height at Maximum Reach	-	4.67 ft	-	-
Maximum Fork Height	-	10.33 ft	-	-
Fork Reach at Maximum Height	-	2 ft	-	-
Turning Radius - Over Bucket*	-	13.42 ft	-	-
Turning Radius - Inside Tire**	-	5.92 ft	-	-
Width - Over Bucket*	-	5.83 ft	-	-
Tire Gauge	-	4.33 ft	-	-
Machine Width**	-	5.58 ft	-	-
Articulation Angle	-	40°	-	-
Steering Angle	-	80°	-	-
Dump Angle at Maximum Height	-	40°	-	-
Note (1)	-	*Vary with bucket size.	-	-
Note (2)	-	**Vary with tire size.	-	-
Note (3)	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Ground to Fuel Tank Clearance	-	-	-	2.2 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Clearance at Maximum Lift (45° Dump)	-	-	-	12 ft
Reach at Maximum Lift (45° Dump)	-	-	-	7.7 ft
Dimensions - Millyard Linkage
Ground to Top of ROPS	13.8 ft	-	-	-
Ground to Top of Exhaust Stacks	13.8 ft	-	-	-
Ground to Top of Hood	10.9 ft	-	-	-
Ground to Bumper Clearance	3.1 ft	-	-	-
Rear Axle - Centerline to Bumper	10.5 ft	-	-	-
Front Axle Centerline to Fork Tip	16.5 ft	-	-	-
Wheel Base	14.9 ft	-	-	-
Maximum Overall Length	41.9 ft	-	-	-
Ground to Lower Hitch Clearance	1.9 ft	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-
Fork Height with Level Arms	8.1 ft	-	-	-
Fork Top Clamp Opening	13.1 ft	-	-	-
Fork Height at Maximum Lift	17.2 ft	-	-	-
Hinge Pin Height at Maximum Lift	16.1 ft	-	-	-
Dump Angle at Maximum Lift	-39.4 °	-	-	-
Weights
Operating Weight	-	9414 lb	-	-
Buckets
Bucket Capacities	-	0.6-1.0 m3 (0.8-1.3 yd3)	-	-
Bucket Capacities - General Purpose	-	0.6 m3 (0.8 yd3)	-	-
Bucket Capacities - Light Material	-	1.0 m3 (1.3 yd3)	-	-
Hydraulic System
Main Relief	-	3481 psi	-	-
3rd Auxiliary Flow	-	14 gpm	-	-
Hydraulic Cycle Time - Lower, Float	-	2.4 s	-	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	-	4.4 s	-	-
Hydraulic Cycle Time - Dump	-	0.7 s	-	-
Cab
ROPS	-	ISO 3471:2008	-	-
FOPS	-	ISO 3449:2005 Level I	-	-
Operating Specifications - Standard Lift
Tire Size	-	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	-	0.8 yd³	-	-
Breakout Force	-	6160 lbf	-	-
Operating Weight	-	9414 lb	-	-
Rated Operating Load at Full Turn - Bucket***	-	2701 lb	-	-
Straight Tipping Load - Bucket***	-	6415 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	5401 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	5512 lb	-	-
Rack Back - Transport Position	-	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	3366 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	2524 lb	-	-
Note (1)	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	-	***Manual quick coupler, precleaner hood.	-	-
Note (4)	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Operating Specifications - High Lift
Tire Size	-	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	-	0.8 yd³	-	-
Breakout Force	-	6204 lbf	-	-
Operating Weight	-	9462 lb	-	-
Rated Operating Load at Full Turn - Bucket***	-	2502 lb	-	-
Straight Tipping Load - Bucket***	-	5975 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	5004 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	5115 lb	-	-
Rack Back - Transport Position	-	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	3148 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	2361 lb	-	-
Note (1)	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	-	***Manual quick coupler, precleaner hood.	-	-
Note (4)	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Maximum Material Densities - General Purpose
Bucket Type	-	General Purpose	-	-
Rated Capacity	-	0.8 yd³	-	-
Dump Height	-	90 in	-	-
Maximum Material Density	-	3169 lb/yd³	-	-
Bucket Width	-	70 in	-	-
Note	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Maximum Material Densities - Light Material
Bucket Type	-	Light Material	-	-
Rated Capacity	-	1.3 yd³	-	-
Dump Height	-	85 in	-	-
Maximum Material Density	-	1989 lb/yd³	-	-
Bucket Width	-	74 in	-	-
Note	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Sustainability
Recyclability	-	97%	-	-
Complete System Fill
Fuel Tank - Standard	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	1414 gal (US)	-
Cooling System	-	-	138 gal (US)	-
Engine Crankcase	-	-	76 gal (US)	-
Transmission	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	20 gal (US)	-
Note	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	119 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	117 dB(A)	-
Note	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	28.8 ft	-
Clearance at Maximum Lift	-	-	19.8 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	21.9 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	39.3 ft	-
Maximum Overall Length	-	-	64.6 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	-	39.7 degrees	-
Reach - Maximum Lift	-	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	31.6 ft	-
Clearance at Maximum Lift	-	-	22.6 ft	-
Dump Angle at Maximum Lift	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	24.2 ft	-
Ground to Bumper Clearance	-	-	4.4 ft	-
Ground to Center of Axles	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	23.2 ft	-
Ground to Top of Hood	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	42.1 ft	-
Maximum Overall Length	-	-	66.9 ft	-
Note	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	-	45 degrees	-
Reach - Maximum Lift	-	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	-	20.4 ft	-
Tread Width	-	-	14.1 ft	-
Wheel Base	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	18.8 ft	-

Compare Equipment Go Back

988 XE Wheel Loader

903D Compact Wheel Loader

995 Wheel Loader

988 GC Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Weights

Buckets

Hydraulic System

Loader Hydraulic System

Cab

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate