Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
-
Weights
Operating Weight
18382 lb
-
-
Operating Weight - LGP
19066 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Relief Valve Settings
7033 psi
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Track Motors
2
-
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Digging Depth
13.3 in
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Overall Width
67.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Dimensions
Length of Basic Dozer (without blade) - LGP
129.5 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
79.1 in
-
-
Dozer Height - LGP
108.9 in
-
-
Dozer Height - Standard
108.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Length of Basic Dozer (without blade) - Standard
129.5 in
-
-
BLADE: Digging Depth - LGP
23.2 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
BLADE: Blade Lift Height - LGP
27.9 in
-
-
BLADE: Blade Width - LGP
124 in
-
-
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
-
-
Track Gauge - LGP
67.9 in
-
-
Ground Clearance - LGP
13 in
-
-
BLADE: Blade Height - LGP
35.8 in
-
-
Overall Length - With Blade - LGP
168.2 in
-
-
BLADE: Blade Capacity (SAE) - LGP
2.42 yd³
-
-
BLADE: Maximum Tilt - LGP
17.2 in
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
Note
Abrasion Undercarriage
-
-
Engine
Power Train
Hydrostatic
-
-
Cab
FOPS
ISO 3449:2005 Level II
-
-
ROPS
ISO 3471:2008
-
-
Undercarriage
Length - Track on Ground - LGP
89 in
-
-
Track Gauge
61 in
-
-
Number of Rollers - Each Side
7
-
-
Track Gauge - LGP
68 in
-
-
Ground Pressure - LGP
4.3 psi
-
-
Shoe Width - Standard
18 in
-
-
Shoe Width - LGP
25 in
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
-
-
Undercarriage
Number of Shoes - Each Side - Abrasion Undercarriage
38
-
-
Ground Pressure
5.7 psi
-
-
Length of Track on Ground
89 in
-
-
Service Refill Capacities
Fuel Tank
51.5 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Final Drive - Each - LGP
2.6 gal (US)
-
-
Cooling System
5 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Service Refill Capacities
Final Drives - Each Side
2.6 gal (US)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
-
Dimensions
BLADE: Maximum Angle (either side) - Standard
25°
-
-
Ground Clearance - Standard
13 in
-
-
Overall Length - With Blade - Standard
168.5 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Maximum Tilt - Standard
15.2 in
-
-
Track Gauge - Standard
61 in
-
-
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
