Compare Equipment Go Back
310 Mini Hydraulic Excavator |
M318 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 69.5 HP | - | - |
Note 1 | Advertised power is tested per the specified standard in effect at the time of manufacture. | - | - |
Stroke | 4.7 in | 5 in | 6 in |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. | - | - |
Bore | 3.7 in | 4 in | 5 in |
Displacement | 203 in³ | 285.5 in³ | 763 in³ |
Gross Power - SAE J1995:2014 | 74.3 HP | - | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat® C3.3B | - | - |
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC | 69.5 HP | - | - |
Engine Power - ISO 14396 | - | 174 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | - | 176 hp (metric) | 431 hp (metric) |
Engine Model | - | C4.4 | Cat C13 |
Net Power - ISO 9249 | - | 171 HP | 424 HP |
Net Power - ISO 9249 (DIN) | - | 174 hp (metric) | 429.9 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
Emissions | - | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
Operating Weight | 22451 lb | - | 128800 lb |
Minimum Operating Weight with Cab* | 21170 lb | - | - |
Maximum Operating Weight with Cab** | 22451 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. | - | - |
Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket. | - | - |
Note | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Dimensions |
|||
Dig Depth | 205.2 in | - | - |
Boom | - | 5205 mm (17'1") | LRE Boom 11.5 m (37'9") |
Bucket | - | 0.91 m³ GD (1.19 yd³) | HD 1.19 m³ (1.56 yd³) |
Stick | - | 2.5 m (8' 2") | LRE Stick 8.5 m (27'11') |
Shipping Height - Top of Cab | - | 11 ft | 11.1 ft |
Shipping Length | - | 27.8 ft | 54 ft |
Counterweight Clearance | - | 4.3 ft | 4.7 ft |
Ground Clearance | - | 1.1 ft | 2.3 ft |
Support Point | - | 11.5 ft | - |
Tail Swing Radius | - | 7.7 ft | 12.3 ft |
Wheel Base | - | 8.9 ft | - |
Handrail Height | - | - | 11.6 ft |
Track Length | - | - | 17.6 ft |
Track Length to Center of Rollers | - | - | 14.2 ft |
Track Gauge | - | - | 10.6 ft |
Transport Width | - | - | 13.6 ft |
Blade |
|||
Height | 17 in | - | - |
Width - Standard | 97.2 in | - | - |
Width - Wide | 103.9 in | - | - |
Hydraulic System |
|||
Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Primary - Flow at Pump | 35 gal/min | - | - |
Operating Pressure - Swing | 3336 psi | - | - |
Digging Force - Bucket | 17459 lb | - | - |
Operating Pressure - Travel | 4134 psi | - | - |
Operating Pressure - Equipment | 4134 psi | - | - |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
Digging Force - Stick | 11060 lb | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Pump Flow at 2,400 rpm | 62 gal/min | - | - |
Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9 gal/min | - | - |
Main System - Maximum Flow - Implement | - | 67 gal/min | - |
Maximum Pressure - Equipment | - | 5366 psi | 5076 psi |
Maximum Pressure - Swing | - | 5149 gal/min | 3771 psi |
Maximum Pressure - Travel | - | 5076 gal/min | 5076 psi |
Maximum Flow - Main System | - | - | 206 gal/min |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing System |
|||
Machine Swing Speed | 10.6 r/min | - | - |
Certification - Cab |
|||
Top Guard | ISO 10262:1998 (Level I) | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Sound |
|||
Note | European Union Directive "2000/14/EC" | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) | - | - |
Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
Dimensions - Standard Stick |
|||
Tail Swing without Counterweight | 70.9 in | - | - |
Stick Length | 98.4 in | - | - |
Boom In Reach | 83.3 in | - | - |
Maximum Reach | 303 in | - | - |
Dig Depth | 205.2 in | - | - |
Ground Clearance - Frame | 14 in | - | - |
O/A Track Width | 97.2 in | - | - |
Cab Height | 100 in | - | - |
Track Belt/Shoe Width | 17.7 in | - | - |
Maximum Blade Depth | 18.8 in | - | - |
Maximum Dump Clearance | 229.5 in | - | - |
Maximum Dig Height | 313.8 in | - | - |
Maximum Blade Height | 16.6 in | - | - |
Tail Swing - Standard Counterweight | 76.1 in | - | - |
O/A Undercarriage Length | 126 in | - | - |
Vertical Wall | 172.6 in | - | - |
Swing Bearing - Height | 28.9 in | - | - |
Maximum Reach - Ground Level | 298 in | - | - |
Overall Shipping Length - with Counterweight | 274.9 in | - | - |
Note (2) | **Boom Height when stick is pinned in working position with attachments. | - | - |
Note (1) | *Boom Height when stick is pinned in transport position (if available) with no attachments. | - | - |
Overall Shipping Length - without Counterweight | 269.7 in | - | - |
Height - Boom Transport - No Tools* | 100.4 in | - | - |
Height - Boom Working - With Tools** | 106.3 in | - | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Sustainability |
|||
Recyclability | 96% | 92% | - |
Weight Increase from Minimum Configuration |
|||
Counterweight | 552 lb | - | - |
Steel Tracks with Pads | 728 lb | - | - |
Travel System |
|||
Maximum Traction Force - Low Speed | 19064 lb | - | - |
Maximum Traction Force - High Speed | 6497 lb | - | - |
Travel Speed - High | 3.1 mile/h | - | - |
Travel Speed - Low | 1.6 mile/h | - | - |
Ground Pressure - Maximum Weight | 6.4 psi | - | - |
Ground Pressure - Minimum Weight | 6 psi | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Service Refill Capacities |
|||
Hydraulic Tank | 14 gal (US) | 31.7 gal (US) | 57.3 gal (US) |
Cooling System | 2.6 gal (US) | 8.5 gal (US) | 13.7 gal (US) |
Engine Oil | 3 gal (US) | - | - |
Fuel Tank | 38 gal (US) | 92.5 gal (US) | - |
Hydraulic System | 37 gal (US) | - | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Hydraulic System - Including Tank | - | 68.7 gal (US) | 145.3 gal (US) |
Final Drive | - | 0.7 gal (US) | - |
Fuel Tank Capacity | - | - | 188.9 gal (US) |
Engine Oil - With Filter | - | - | 10.6 gal (US) |
Swing Drive | - | - | 2.8 gal (US) |
Final Drive - Each | - | - | 2.5 gal (US) |
DEF Tank | - | - | 12.2 gal (US) |
Machine Weight |
|||
Operating Weight Maximum | - | 43980 lb | - |
Operating Weight Minimum | - | 38580 lb | - |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - |
Drive |
|||
Maximum Travel Speed | - | 21.7 mile/h | - |
Working Ranges and Forces |
|||
Boom Type | - | VA Boom | - |
Bucket | - | 0.91 m³ GD (1.19 yd³) | - |
Digging Height | - | 19.3 ft | - |
Stick | - | 2.5 m (8' 2") | - |
Reach at Ground Level | - | 30.2 ft | - |
Vertical Wall Digging Depth | - | 15.1 ft | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - |
Bucket Forces (ISO) | - | 26752 lbf | - |
Stick Forces (ISO) | - | 16861 lbf | - |
Cutting Height | - | 33.7 ft | - |
Swing Mechanism |
|||
Maximum Swing Speed | - | 32560 ft·lbf | - |
Swing Speed | - | 9.4 r/min | - |
Maximum Swing Torque | - | - | 138000 ft·lbf |
Service Refill |
|||
Engine Oil | - | 2.9 gal (US) | - |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | - | 42.8 ft |
Boom | - | - | LRE Boom 11.5 m (37'9") |
Stick | - | - | LRE Stick 8.5 m (27'11') |
Bucket | - | - | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | - | - | 64.4 ft |
Maximum Cutting Height | - | - | 48.2 ft |
Maximum Loading Height | - | - | 39.4 ft |
Minimum Loading Height | - | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 42.5 ft |
Bucket Digging Force - ISO | - | - | 31700 lbf |
Stick Digging Force - ISO | - | - | 23380 lbf |
Add a Similar Product: