Compare Equipment Go Back
310 Mini Hydraulic Excavator |
M314 Wheeled Excavator |
352 UHD Ultra High Demolition Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 69.5 HP | - | - |
Note 1 | Advertised power is tested per the specified standard in effect at the time of manufacture. | - | - |
Stroke | 4.7 in | 5 in | 6 in |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. | - | - |
Bore | 3.7 in | 3.9 in | 5 in |
Displacement | 203 in³ | 221 in³ | 763 in³ |
Gross Power - SAE J1995:2014 | 74.3 HP | - | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat® C3.3B | - | - |
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC | 69.5 HP | - | - |
Engine Power - ISO 14396 | - | 134 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | - | 136 hp (metric) | 431 hp (metric) |
Engine Model | - | Cat C3.6 | Cat C13 |
Net Power - ISO 9249 | - | 134 HP | 424 HP |
Net Power - ISO 9249 (DIN) | - | 129 hp (metric) | 430 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
Emissions | - | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
Operating Weight | 22451 lb | - | 143300 lb |
Minimum Operating Weight with Cab* | 21170 lb | - | - |
Maximum Operating Weight with Cab** | 22451 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. | - | - |
Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket. | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. |
Machine Weight - Retrofit Configuration | - | - | 139300 lb |
Note (3) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. |
UHD in Cradle | - | - | 26000 lb |
Retrofit Boom in Cradle - R3.9 TB Stick | - | - | 16310 lb |
Retrofit Boom in Cradle - R3.35 TB Stick | - | - | 15950 lb |
Retrofit Boom in Cradle - R2.9 TB Stick | - | - | 15760 lb |
Dimensions |
|||
Dig Depth | 205.2 in | - | - |
Boom | - | 5m (16' 6") | - |
Bucket | - | 0.76m3 (.78 yd3) | - |
Stick | - | 2.2m (7' 3") | - |
Counterweight Clearance | - | 4.1 ft | 4.7 ft |
Ground Clearance | - | 1.1 ft | 1.7 ft |
Shipping Height - Top of Cab | - | 3315 ft | 11.1 ft |
Shipping Length | - | 26.9 ft | 61.8 ft |
Tail Swing Radius | - | 7.1 ft | 12.3 ft |
Undercarriage Length | - | 16.1 ft | - |
Wheel Base | - | 8.2 ft | - |
Note (1) | - | - | 28 m (91'10") UHD Front |
Cab Height - With OPG | - | - | 11.8 ft |
Track Length | - | - | 18.9 ft |
Track Length to Center of Rollers | - | - | 15.6 ft |
Working Gauge - Extended Position | - | - | 11.2 ft |
Shipping Gauge - Retracted Position | - | - | 7.9 ft |
Transport Width | - | - | 10.7 ft |
Machine Length - without Front, with Counterweight | - | - | 25.5 ft |
Machine Length - without Front and Counterweight | - | - | 24.9 ft |
Track Width - Extended | - | - | 13.1 ft |
Track Width - Retracted | - | - | 9.8 ft |
Note (2) | - | - | 600 mm (24") Track Shoes |
Blade |
|||
Height | 17 in | - | - |
Width - Standard | 97.2 in | - | - |
Width - Wide | 103.9 in | - | - |
Hydraulic System |
|||
Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Primary - Flow at Pump | 35 gal/min | - | - |
Operating Pressure - Swing | 3336 psi | - | - |
Digging Force - Bucket | 17459 lb | - | - |
Operating Pressure - Travel | 4134 psi | - | - |
Operating Pressure - Equipment | 4134 psi | - | - |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
Digging Force - Stick | 11060 lb | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Pump Flow at 2,400 rpm | 62 gal/min | - | - |
Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9 gal/min | - | - |
Main System - Maximum Flow - Implement | - | 71 gal/min | - |
Maximum Pressure - Equipment | - | 5076 psi | 5076 psi |
Maximum Pressure - Swing | - | 5149 psi | 3771 psi |
Maximum Pressure - Travel | - | 5076 psi | 5076 psi |
Main System - Maximum Flow | - | - | 779 l/min (206 gal/min) |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing System |
|||
Machine Swing Speed | 10.6 r/min | - | - |
Certification - Cab |
|||
Top Guard | ISO 10262:1998 (Level I) | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Sound |
|||
Note | European Union Directive "2000/14/EC" | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) | - | - |
Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
Dimensions - Standard Stick |
|||
Tail Swing without Counterweight | 70.9 in | - | - |
Stick Length | 98.4 in | - | - |
Boom In Reach | 83.3 in | - | - |
Maximum Reach | 303 in | - | - |
Dig Depth | 205.2 in | - | - |
Ground Clearance - Frame | 14 in | - | - |
O/A Track Width | 97.2 in | - | - |
Cab Height | 100 in | - | - |
Track Belt/Shoe Width | 17.7 in | - | - |
Maximum Blade Depth | 18.8 in | - | - |
Maximum Dump Clearance | 229.5 in | - | - |
Maximum Dig Height | 313.8 in | - | - |
Maximum Blade Height | 16.6 in | - | - |
Tail Swing - Standard Counterweight | 76.1 in | - | - |
O/A Undercarriage Length | 126 in | - | - |
Vertical Wall | 172.6 in | - | - |
Swing Bearing - Height | 28.9 in | - | - |
Maximum Reach - Ground Level | 298 in | - | - |
Overall Shipping Length - with Counterweight | 274.9 in | - | - |
Note (2) | **Boom Height when stick is pinned in working position with attachments. | - | - |
Note (1) | *Boom Height when stick is pinned in transport position (if available) with no attachments. | - | - |
Overall Shipping Length - without Counterweight | 269.7 in | - | - |
Height - Boom Transport - No Tools* | 100.4 in | - | - |
Height - Boom Working - With Tools** | 106.3 in | - | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Sustainability |
|||
Recyclability | 96% | 91% | - |
Weight Increase from Minimum Configuration |
|||
Counterweight | 552 lb | - | - |
Steel Tracks with Pads | 728 lb | - | - |
Travel System |
|||
Maximum Traction Force - Low Speed | 19064 lb | - | - |
Maximum Traction Force - High Speed | 6497 lb | - | - |
Travel Speed - High | 3.1 mile/h | - | - |
Travel Speed - Low | 1.6 mile/h | - | - |
Ground Pressure - Maximum Weight | 6.4 psi | - | - |
Ground Pressure - Minimum Weight | 6 psi | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Service Refill Capacities |
|||
Hydraulic Tank | 14 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
Cooling System | 2.6 gal (US) | 6.3 gal (US) | 13.7 gal (US) |
Engine Oil | 3 gal (US) | - | 10.6 gal (US) |
Fuel Tank | 38 gal (US) | 77.9 gal (US) | - |
Hydraulic System | 37 gal (US) | - | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Final Drive | - | 0.6 gal (US) | - |
Hydraulic System - Including Tank | - | 58.1 gal (US) | 145.3 gal (US) |
Fuel Tank Capacity | - | - | 188.9 gal (US) |
Swing Drive - Each | - | - | 2.8 gal (US) |
Final Drive - Each | - | - | 2.5 gal (US) |
DEF Tank | - | - | 12.2 gal (US) |
Machine Weight |
|||
Operating Weight Maximum | - | 39683 lb | - |
Note (1) | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - |
Operating Weight Minimum | - | 33069 lb | - |
Drive |
|||
Maximum Travel Speed | - | 23 mile/h | - |
Swing Mechanism |
|||
Maximum Swing Torque | - | 28860 ft·lbf | 139000 ft·lbf |
Swing Speed | - | 9.1 r/min | 8.44 r/min |
Working Ranges and Forces |
|||
Boom Type | - | VA Boom | - |
Bucket | - | 0.76m3 (0.99 y3) GD | - |
Stick | - | R2.2CB (7' 3") | - |
Digging Height | - | 17.4 ft | - |
Dump Height | - | 23 ft | - |
Reach at Ground Level | - | 28.4 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | - |
Note (1) | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | 28 m (91' 10") UHD Front Over-the-Front |
Maximum Pin Height at Stick Nose | - | - | 90.8 ft |
Maximum Weight at Stick Nose | - | - | 8157 lb |
Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 75.2 ft |
Maximum Working Reach at Stick Nose - 1/2 | - | - | 45.4 ft |
Maximum Height at Stick Nose in Max Reach Position | - | - | 52.9 ft |
Maximum Reach at Stick Nose | - | - | 51.7 ft |
Swing Mechanism - UHD Fronts |
|||
Swing Speed | - | - | 4.22 r/min |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
Note 1 | - | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) |
Maximum Pin Height at Stick Nose | - | - | 39.8 ft |
Maximum Weight at Stick Nose | - | - | 13190 lb |
Maximum Height at Stick Nose in Max Reach Position | - | - | 7.7 ft |
Maximum Reach at Stick Nose | - | - | 36.5 ft |
Maximum Digging Depth | - | - | 17 ft |
Maximum Reach - Ground Level | - | - | 41.9 ft |
Maximum Loading Height | - | - | 33.6 ft |
Minimum Loading Height | - | - | 15 ft |
Bucket Digging Force - ISO | - | - | 60250 lbf |
Stick Digging Force - ISO | - | - | 44740 lbf |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
Note 1 | - | - | Bent - R3.35 m (11'0") Stick |
Bucket | - | - | GD 3.08 m³ (4.03 yd³) |
Maximum Digging Depth | - | - | 21.9 ft |
Maximum Reach - Ground Level | - | - | 39 ft |
Maximum Cutting Height | - | - | 35.1 ft |
Maximum Loading Height | - | - | 24.6 ft |
Minimum Loading Height | - | - | 10 ft |
Bucket Digging Force - ISO | - | - | 60250 lbf |
Stick Digging Force - ISO | - | - | 44740 lbf |
Add a Similar Product: