CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    309 CR VAB Mini Hydraulic Excavator
    View Product
    M316 Wheel Excavator
    View Product Remove
    M320 Wheeled Excavator
    View Product Remove

    Engine
    Net Power 69.5 hp - -
    Note Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. - -
    Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC 69.5 hp - -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C3.3B - -
    Displacement 203 in³ 268.5 in³ 268.5 in³
    Stroke 4.7 in 5 in 5.3 in
    Bore 3.7 in 4.1 in 4 in
    Gross Power - SAE J1995:2014 74.3 hp - -
    Engine Power - ISO 14396 - 148 hp -
    Engine Power - ISO 14396 (DIN) - 150 hp (metric) 176 hp (metric)
    Engine Model - Cat® C4.4 C4.4
    Net Power - ISO 9249 - 141 hp 171 hp
    Net Power - ISO 9249 (DIN) - 143 hp (metric) 174 hp (metric)
    Biodiesel Capability - Up to B20¹ Up to B20¹
    Emissions - Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
    Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advert Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar
    Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
    Engine Power - ISO 14396:2002 - - 174 hp

    Weights
    Operating Weight 21477 lb - -
    Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
    Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
    Minimum Operating Weight* 20121 lb - -
    Maximum Operating Weight* 21477 lb - -

    Dimensions - VAB In
    Dig Depth 150.2 in - -
    Cab Height 100 in - -
    Maximum Blade Depth 19.1 in - -
    Maximum Blade Height 16.1 in - -
    Stick Length 71.7 in - -
    Maximum Reach 256.5 in - -
    Tail Swing without Counterweight 57.1 in - -
    Vertical Wall 99.2 in - -
    Swing Bearing Height 29.8 in - -
    Track Belt/Shoe Width 17.7 in - -
    Boom Swing Right 37 in - -
    Overall Track Width 97.2 in - -
    Overall Shipping Length 255.7 in - -
    Maximum Dump Clearance 135.8 in - -
    Boom in Reach 122.8 in - -
    Maximum Reach at Ground Level 248 in - -
    Transport Height 97.4 in - -
    Overall Undercarriage Length 126 in - -
    Ground Clearance 14 in - -
    Tail Swing with Counterweight 62.4 in - -
    Maximum Dig Height 205.5 in - -
    Boom Swing Left 24 in - -

    Blade
    Height 17 in - -
    Width - Wide 103.9 in - -
    Width - Standard 97.2 in - -

    Weight Increase from Minimum Configuration
    Standard Stick 77 lb - -
    Steel Tracks with Pads 728 lb - -
    Counterweight 552 lb - -

    Hydraulic System
    Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down. - -
    Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min - -
    Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi - -
    Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min - -
    Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi - -
    Maximum Auxiliary Circuit - Primary (High Flow) - Pressure at Pump 4134 psi - -
    Maximum Auxiliary Circuit - Primary (High Flow) - Flow at Pump 37 gal/min - -
    Operating Pressure - Travel 4134 psi - -
    Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
    Digging Force - Stick - Standard 9509 lbf - -
    Digging Force - Bucket 13946 lbf - -
    Pump Flow at 2,400 rpm 62 gal/min - -
    Operating Pressure - Swing 3626 psi - -
    Operating Pressure - Equipment 4134 psi - -
    Main System - Maximum Flow - Implement - 73 gal/min 81 gal/min
    Maximum Pressure - Implement Circuit - Normal - 5076 psi -
    Maximum Pressure - Implement Circuit - Heavy Lift - 5366 psi -
    Maximum Pressure - Implement Circuit - Travel Circuit - 5076 psi -
    Maximum Pressure - Equipment - - 5366 psi
    Maximum Pressure - Swing - - 5729 gal/min
    Maximum Pressure - Travel - - 5076 gal/min

    Swing System
    Boom Swing - Left 60 degrees - -
    Boom Swing - Right 50 degrees - -
    Machine Swing Speed 10.6 r/min - -

    Dimensions - VAB Out
    Ground Clearance 14 in - -
    Cab Height 100 in - -
    Boom in Reach 106.7 in - -
    Vertical Wall 146.7 in - -
    Swing Bearing Height 29.8 in - -
    Maximum Dump Clearance 247.4 in - -
    Overall Undercarriage Length 126 in - -
    Maximum Reach at Ground Level 303.7 in - -
    Tail Swing without Counterweight 57.1 in - -
    Maximum Reach 310.4 in - -
    Track Belt/Shoe Width 17.7 in - -
    Overall Shipping Length 255.7 in - -
    Maximum Blade Depth 19.1 in - -
    Maximum Dig Height 322 in - -
    Overall Track Width 97.2 in - -
    Tail Swing with Counterweight 62.4 in - -
    Stick Length 71.7 in - -
    Maximum Blade Height 16.1 in - -
    Boom Swing Right 37 in - -
    Boom Swing Left 24 in - -
    Transport Height 97.4 in - -
    Dig Depth 136.2 in - -

    Sustainability
    Recyclability 96% - -

    Travel System
    Ground Pressure - Minimum Weight 5.1 psi - -
    Travel Speed - High 3.1 mile/h - -
    Maximum Traction Force - High Speed 6497 lbf - -
    Travel Speed - Low 1.6 mile/h - -
    Ground Pressure - Maximum Weight 5.5 psi - -
    Maximum Traction Force - Low Speed 19064 lbf - -
    Gradeability - Maximum 30 degrees - -

    Service Refill Capacities
    Fuel Tank 39 gal (US) 92.5 gal (US) 124.2 gal (US)
    Hydraulic System 29 gal (US) - -
    Engine Oil 3 gal (US) - -
    Hydraulic Tank 14 gal (US) 31.7 gal (US) 40.9 gal (US)
    Cooling System 2.6 gal (US) 6.3 gal (US) 8.4 gal (US)
    Diesel Exhaust Fluid (DEF) - 5.3 gal (US) 7.9 gal (US)
    Hydraulic System - Including Tank - 68.7 gal (US) 71.3 gal (US)
    Final Drive - - 0.7 gal (US)

    Specifications
    Note The 309 CR VAB specifications are based on a machine configured with a Long (L) Undercarriage. For specifications representing a 309 CR VAB with a Standard Undercarriage, please refer to the 308 CR information. - -

    Certification - Cab
    Top Guard ISO 10262:1998 (Level II) - -
    Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
    Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

    Sound
    Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) - -
    Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
    Note European Union Directive "2000/14/EC" - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. - -
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

    Machine Weight
    Operating Weight Maximum - 36990 lb 46740 lb
    Operating Weight Minimum - 36400 lb 41450 lb
    Note (1) - Operating weight includes full fuel tank, operator and 10.00-20 tires. Weight varies depending on configuration. -

    Drive
    Maximum Travel Speed - 21.7 mile/h -

    Swing Mechanism
    Maximum Swing Speed - 10.2 r/min -
    Maximum Swing Torque - 32305 lbf·ft 37000 ft·lbf
    Note (1) - *For CE-marked machine default value may be set lower. -
    Swing Speed - - 9.2 r/min

    Dimensions
    Boom - Variable Adjustable Boom 5.2 m (17'1") 5260 mm (17'3")
    Stick - 2.5 m (8'2") 2.5 m (8' 2")
    Bucket - GD 0.8 m³ (1.05 yd³) 0.98 m³ GD (1.28 yd³)
    Shipping Height - Top of Cab - 11 ft 11 ft
    Shipping Length - 28.6 ft 29.3 ft
    Support Point - 11.6 ft 11.8 ft
    Tail Swing Radius - 7.7 ft 8.5 ft
    Counterweight Clearance - 4.3 ft 4.3 ft
    Ground Clearance - 1.3 ft 1.4 ft
    Undercarriage Length - 16.3 ft -
    Wheel Base - 8.4 ft 8.9 ft

    Working Ranges and Forces
    Boom - Variable Adjustable Boom 5.2 m (17'1") -
    Stick - 2.5 m (8'2") 2.5 m (8' 2")
    Bucket - GD 0.8 m³ (1.05 yd³) 0.98 m³ GD (1.28 yd³)
    Maximum Cutting Height - 33.6 ft -
    Maximum Loading Height - 23.9 ft -
    Maximum Digging Depth - 19.4 ft -
    Maximum Vertical Wall Digging Depth - 15.2 ft -
    Maximum Reach at Ground Line - 30.2 ft -
    Stick Forces (ISO) - 15512 lbf 20682 lbf
    Bucket Forces (ISO) - 26752 lbf 30799 lbf
    Note (1) - Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0").
    Boom Type - - VA Boom
    Reach at Ground Level - - 30.5 ft
    Vertical Wall Digging Depth - - 13.9 ft
    Cutting Height - - 32.6 ft

    Transmission
    Maximum Travel Speed - - 21.7 mile/h
    Add a Similar Product:
    • M314 Wheel Excavator Add
    • M319 Wheel Excavator Add
    • M318 Wheel Excavator Add
    • M322 Add
    • M315 Wheeled Excavator Add
    • 315 Hydraulic Excavator Add
    • 317 GC Hydraulic Excavator Add
    • 317 Hydraulic Excavator Add
    • 313 Hydraulic Excavator Add
    • 315 GC Hydraulic Excavator Add