Compare Equipment Go Back
 309 CR VAB Mini Hydraulic Excavator |
 M322 |
 340 UHD Ultra High Demolition Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power | 69.5 HP | - | - |
| Note | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. | - | - |
| Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC | 69.5 HP | - | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C3.3B | - | - |
| Displacement | 203 in³ | 427.8 in² | 568 in³ |
| Stroke | 4.7 in | 5.3 in | 6 in |
| Bore | 3.7 in | 4.1 in | 5 in |
| Gross Power - SAE J1995 | 74.3 HP | - | - |
| Engine Power - ISO 14396 | - | 174 HP | 347 HP |
| Engine Power - ISO 14396 (DIN) | - | 176 hp (metric) | 351 hp (metric) |
| Engine Model | - | C 7.1 | Cat C9.3B |
| Net Power - ISO 9249 | - | 171 HP | 346 HP |
| Net Power - ISO 9249 (DIN) | - | 174 hp (metric) | 352 hp (metric) |
| Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
| Emissions | - | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 21477 lb | - | 122600 lb |
| Note (1) | *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. | - | Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, standard stick, blade and no bucket. | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. |
| Minimum Operating Weight* | 20121 lb | - | - |
| Maximum Operating Weight* | 21477 lb | - | - |
| Machine Weight - Retrofit Configuration | - | - | 118600 lb |
| UHD in Cradle | - | - | 18700 lb |
| Retrofit Boom in Cradle - R3.9 DB Stick | - | - | 13710 lb |
| Retrofit Boom in Cradle - R3.2 DB Stick | - | - | 13340 lb |
| Retrofit Boom in Cradle - R2.8 DB Stick | - | - | 13120 lb |
| 2-piece Retrofit boom in cradle - R3.2 DB stick | - | - | 17440 lb |
Dimensions - VAB In |
|||
| Dig Depth | 150.2 in | - | - |
| Cab Height | 100 in | - | - |
| Maximum Blade Depth | 19.1 in | - | - |
| Maximum Blade Height | 16.1 in | - | - |
| Stick Length | 71.7 in | - | - |
| Maximum Reach | 256.5 in | - | - |
| Tail Swing without Counterweight | 57.1 in | - | - |
| Vertical Wall | 99.2 in | - | - |
| Swing Bearing Height | 29.8 in | - | - |
| Track Belt/Shoe Width | 17.7 in | - | - |
| Boom Swing Right | 37 in | - | - |
| Overall Track Width | 97.2 in | - | - |
| Overall Shipping Length | 255.7 in | - | - |
| Maximum Dump Clearance | 135.8 in | - | - |
| Boom in Reach | 122.8 in | - | - |
| Maximum Reach at Ground Level | 248 in | - | - |
| Transport Height | 97.4 in | - | - |
| Overall Undercarriage Length | 126 in | - | - |
| Ground Clearance | 14 in | - | - |
| Tail Swing with Counterweight | 62.4 in | - | - |
| Maximum Dig Height | 205.5 in | - | - |
| Boom Swing Left | 24 in | - | - |
Blade |
|||
| Height | 17 in | - | - |
| Width - Wide | 103.9 in | - | - |
| Width - Standard | 97.2 in | - | - |
Weight Increase from Minimum Configuration |
|||
| Standard Stick | 77 lb | - | - |
| Steel Tracks with Pads | 728 lb | - | - |
| Counterweight | 552 lb | - | - |
Hydraulic System |
|||
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
| Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9 gal/min | - | - |
| Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134 psi | - | - |
| Maximum Auxiliary Circuit - Primary - Flow at Pump | 35 gal/min | - | - |
| Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134 psi | - | - |
| Maximum Auxiliary Circuit - Primary (High Flow) - Pressure at Pump | 4134 psi | - | - |
| Maximum Auxiliary Circuit - Primary (High Flow) - Flow at Pump | 37 gal/min | - | - |
| Operating Pressure - Travel | 4134 psi | - | - |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
| Digging Force - Stick - Standard | 9509 lbf | - | - |
| Digging Force - Bucket | 13946 lbf | - | - |
| Pump Flow at 2,400 rpm | 62 gal/min | - | - |
| Operating Pressure - Swing | 3626 psi | - | - |
| Operating Pressure - Equipment | 4134 psi | - | - |
| Main System - Maximum Flow - Implement | - | 95 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Main System - Maximum Flow | - | - | 560 l/min (148 gal/min) |
| Maximum Pressure - Equipment | - | - | 5076 psi |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
| Maximum Pressure - Travel | - | - | 5076 psi |
| Maximum Pressure - Swing | - | - | 4264 psi |
Swing System |
|||
| Boom Swing - Left | 60 degrees | - | - |
| Boom Swing - Right | 50 degrees | - | - |
| Machine Swing Speed | 10.6 r/min | - | - |
Dimensions - VAB Out |
|||
| Ground Clearance | 14 in | - | - |
| Cab Height | 100 in | - | - |
| Boom in Reach | 106.7 in | - | - |
| Vertical Wall | 146.7 in | - | - |
| Swing Bearing Height | 29.8 in | - | - |
| Maximum Dump Clearance | 247.4 in | - | - |
| Overall Undercarriage Length | 126 in | - | - |
| Maximum Reach at Ground Level | 303.7 in | - | - |
| Tail Swing without Counterweight | 57.1 in | - | - |
| Maximum Reach | 310.4 in | - | - |
| Track Belt/Shoe Width | 17.7 in | - | - |
| Overall Shipping Length | 255.7 in | - | - |
| Maximum Blade Depth | 19.1 in | - | - |
| Maximum Dig Height | 322 in | - | - |
| Overall Track Width | 97.2 in | - | - |
| Tail Swing with Counterweight | 62.4 in | - | - |
| Stick Length | 71.7 in | - | - |
| Maximum Blade Height | 16.1 in | - | - |
| Boom Swing Right | 37 in | - | - |
| Boom Swing Left | 24 in | - | - |
| Transport Height | 97.4 in | - | - |
| Dig Depth | 136.2 in | - | - |
Sustainability |
|||
| Recyclability | 96% | - | - |
Travel System |
|||
| Ground Pressure - Minimum Weight | 5.1 psi | - | - |
| Travel Speed - High | 3.1 mile/h | - | - |
| Maximum Traction Force - High Speed | 6497 lbf | - | - |
| Travel Speed - Low | 1.6 mile/h | - | - |
| Ground Pressure - Maximum Weight | 5.5 psi | - | - |
| Maximum Traction Force - Low Speed | 19064 lbf | - | - |
| Gradeability - Maximum | 30 degrees | - | - |
Service Refill Capacities |
|||
| Fuel Tank | 39 gal (US) | 124.2 gal (US) | - |
| Hydraulic System | 29 gal (US) | - | - |
| Engine Oil | 3 gal (US) | 3.4 gal (US) | 9 gal (US) |
| Hydraulic Tank | 14 gal (US) | 52.8 gal (US) | 43 gal (US) |
| Cooling System | 2.6 gal (US) | 10.6 gal (US) | 11 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - |
| Hydraulic System - Including Tank | - | 71.3 gal (US) | 145 gal (US) |
| Fuel Tank Capacity | - | - | 159 gal (US) |
| Swing Drive | - | - | 5 gal (US) |
| Final Drive - Each | - | - | 2 gal (US) |
| DEF Tank | - | - | 21 gal (US) |
Specifications |
|||
| Note | The 309 CR VAB specifications are based on a machine configured with a Long (L) Undercarriage. For specifications representing a 309 CR VAB with a Standard Undercarriage, please refer to the 308 CR information. | - | - |
Certification - Cab |
|||
| Top Guard | ISO 10262:1998 (Level II) | - | - |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Sound |
|||
| Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) | - | - |
| Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
| Note | European Union Directive "2000/14/EC" | - | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 52911 lb | - |
| Operating Weight Minimum | - | 44750 lb | - |
Transmission |
|||
| Forward/Reverse - 2nd Gear | - | 18.6 mile/h | - |
| Forward/Reverse - 1st Gear | - | 5.6 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 28551 lbf | - |
| Maximum Gradeability | - | 70% | - |
Swing Mechanism |
|||
| Swing Torque | - | 44250 lb/ft | - |
| Swing Speed | - | - | 8 r/min |
| Maximum Swing Torque | - | - | 105000 ft·lbf |
Dimensions |
|||
| Boom | - | VA 5.4m (17'10") | - |
| Stick | - | 2.9m (9'2") | - |
| Shipping Height with Falling Object Guard | - | 11 ft | - |
| Support Point | - | 11.3 ft | - |
| Shipping Length | - | 31.1 ft | 49.9 ft |
| Tail Swing Radius | - | 9.2 ft | 11.6 ft |
| Counterweight Clearance | - | 4.3 ft | 4.6 ft |
| Ground Clearance | - | 1.25 ft | 1.7 ft |
| Wheel Base | - | 9 ft | - |
| Note (1) | - | - | 22 m (72'2") UHD Front |
| Shipping Height - Top of Cab | - | - | 11.1 ft |
| Cab Height - With OPG | - | - | 11.8 ft |
| Track Length | - | - | 18.9 ft |
| Track Length to Center of Rollers | - | - | 15.6 ft |
| Working Gauge - Extended Position | - | - | 11.1 ft |
| Shipping Gauge - Retracted Position | - | - | 7.8 ft |
| Transport Width | - | - | 10.7 ft |
| Machine Length - without Front, with Counterweight | - | - | 23.3 ft |
| Machine Length - without Front and Counterweight | - | - | 22.9 ft |
| Track Width - Extended | - | - | 13.1 ft |
| Track Width - Retracted | - | - | 9.8 ft |
| Note (2) | - | - | 600 mm (24") Track Shoes |
Working Ranges and Forces |
|||
| Boom Type | - | VA 5.4m (17'10") | - |
| Stick | - | 2.9m (9'2") | - |
| Bucket | - | GD 1.2 m³ (1.7 yd³) | - |
| Maximum Loading Height | - | 24.7 ft | - |
| Maximum Digging Depth | - | 21.8 ft | - |
| Reach at Ground Level | - | 33.4 ft | - |
| Vertical Wall Digging Depth | - | 17.3 ft | - |
| Bucket Forces (ISO) | - | 33946 lbf | - |
| Stick Forces (ISO) | - | 23605 lbf | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - |
| Maximum Pin Height at Stick Nose | - | - | 72.2 ft |
| Maximum Weight at Stick Nose | - | - | 8160 lb |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 61 ft |
| Maximum Working Reach at Stick Nose - 1/2 | - | - | 38.4 ft |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 41.5 ft |
| Maximum Reach at Stick Nose | - | - | 44.4 ft |
| Note (1) | - | - | 22 m (72' 2") UHD Front (Over-the-Front) |
working Ranges and Forces |
|||
| Cutting Height | - | 35.8 ft | - |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | - | 4.09 r/min |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | - | Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage |
| Bucket | - | - | GD 2.27 m³ (2.97 yd³) |
| Maximum Pin Height at Stick Nose | - | - | 39.8 ft |
| Maximum Weight at Stick Nose | - | - | 9260 lb |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 7.6 ft |
| Maximum Reach at Stick Nose | - | - | 34.8 ft |
| Maximum Digging Depth | - | - | 16.1 ft |
| Maximum Reach - Ground Level | - | - | 39.9 ft |
| Maximum Loading Height | - | - | 34 ft |
| Minimum Loading Height | - | - | 15.7 ft |
| Bucket Digging Force - ISO | - | - | 47160 lbf |
| Stick Digging Force - ISO | - | - | 37300 lbf |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | - | Bent - R3.2DB (10'6") Stick - HVG Undercarriage |
| Bucket | - | - | GD 2.27 m³ (2.97 yd³) |
| Maximum Digging Depth | - | - | 21.4 ft |
| Maximum Reach - Ground Level | - | - | 36.7 ft |
| Maximum Cutting Height | - | - | 35.4 ft |
| Maximum Loading Height | - | - | 24.9 ft |
| Minimum Loading Height | - | - | 10.4 ft |
| Bucket Digging Force - ISO | - | - | 47160 lbf |
| Stick Digging Force - ISO | - | - | 37300 lbf |
Add a Similar Product:
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
374 Hydraulic Excavator Add