Compare Equipment Go Back

309 CR VAB Mini Hydraulic Excavator
M314 Wheeled Excavator
352 LRE Long Reach Excavation Hydraulic Excavator

Engine

Net Power 69.5 HP - -
Note Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. - -
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC 69.5 HP - -
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C3.3B - -
Displacement 203 in³ 221 in³ 763 in³
Stroke 4.7 in 5 in 6 in
Bore 3.7 in 3.9 in 5 in
Gross Power - SAE J1995 74.3 HP - -
Engine Power - ISO 14396 - 134 HP 425 HP
Engine Power - ISO 14396 (DIN) - 136 hp (metric) 431 hp (metric)
Engine Model - Cat C3.6 Cat C13
Net Power - ISO 9249 - 134 HP 424 HP
Net Power - ISO 9249 (DIN) - 129 hp (metric) 429.9 hp (metric)
Biodiesel Capability - Up to B20¹ Up to B20¹
Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 21477 lb - 128800 lb
Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
Minimum Operating Weight* 20121 lb - -
Maximum Operating Weight* 21477 lb - -
Note - - Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight.

Dimensions - VAB In

Dig Depth 150.2 in - -
Cab Height 100 in - -
Maximum Blade Depth 19.1 in - -
Maximum Blade Height 16.1 in - -
Stick Length 71.7 in - -
Maximum Reach 256.5 in - -
Tail Swing without Counterweight 57.1 in - -
Vertical Wall 99.2 in - -
Swing Bearing Height 29.8 in - -
Track Belt/Shoe Width 17.7 in - -
Boom Swing Right 37 in - -
Overall Track Width 97.2 in - -
Overall Shipping Length 255.7 in - -
Maximum Dump Clearance 135.8 in - -
Boom in Reach 122.8 in - -
Maximum Reach at Ground Level 248 in - -
Transport Height 97.4 in - -
Overall Undercarriage Length 126 in - -
Ground Clearance 14 in - -
Tail Swing with Counterweight 62.4 in - -
Maximum Dig Height 205.5 in - -
Boom Swing Left 24 in - -

Blade

Height 17 in - -
Width - Wide 103.9 in - -
Width - Standard 97.2 in - -

Weight Increase from Minimum Configuration

Standard Stick 77 lb - -
Steel Tracks with Pads 728 lb - -
Counterweight 552 lb - -

Hydraulic System

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down. - -
Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min - -
Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min - -
Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary (High Flow) - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary (High Flow) - Flow at Pump 37 gal/min - -
Operating Pressure - Travel 4134 psi - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Digging Force - Stick - Standard 9509 lbf - -
Digging Force - Bucket 13946 lbf - -
Pump Flow at 2,400 rpm 62 gal/min - -
Operating Pressure - Swing 3626 psi - -
Operating Pressure - Equipment 4134 psi - -
Main System - Maximum Flow - Implement - 71 gal/min -
Maximum Pressure - Equipment - 5076 psi 5076 psi
Maximum Pressure - Swing - 5149 psi 3771 psi
Maximum Pressure - Travel - 5076 psi 5076 psi
Maximum Flow - Main System - - 206 gal/min
Maximum Pressure - Equipment - Lift Mode - - 5511 psi

Swing System

Boom Swing - Left 60 degrees - -
Boom Swing - Right 50 degrees - -
Machine Swing Speed 10.6 r/min - -

Dimensions - VAB Out

Ground Clearance 14 in - -
Cab Height 100 in - -
Boom in Reach 106.7 in - -
Vertical Wall 146.7 in - -
Swing Bearing Height 29.8 in - -
Maximum Dump Clearance 247.4 in - -
Overall Undercarriage Length 126 in - -
Maximum Reach at Ground Level 303.7 in - -
Tail Swing without Counterweight 57.1 in - -
Maximum Reach 310.4 in - -
Track Belt/Shoe Width 17.7 in - -
Overall Shipping Length 255.7 in - -
Maximum Blade Depth 19.1 in - -
Maximum Dig Height 322 in - -
Overall Track Width 97.2 in - -
Tail Swing with Counterweight 62.4 in - -
Stick Length 71.7 in - -
Maximum Blade Height 16.1 in - -
Boom Swing Right 37 in - -
Boom Swing Left 24 in - -
Transport Height 97.4 in - -
Dig Depth 136.2 in - -

Sustainability

Recyclability 96% 91% -

Travel System

Ground Pressure - Minimum Weight 5.1 psi - -
Travel Speed - High 3.1 mile/h - -
Maximum Traction Force - High Speed 6497 lbf - -
Travel Speed - Low 1.6 mile/h - -
Ground Pressure - Maximum Weight 5.5 psi - -
Maximum Traction Force - Low Speed 19064 lbf - -
Gradeability - Maximum 30 degrees - -

Service Refill Capacities

Fuel Tank 39 gal (US) 77.9 gal (US) -
Hydraulic System 29 gal (US) - -
Engine Oil 3 gal (US) - -
Hydraulic Tank 14 gal (US) 23.8 gal (US) 57.3 gal (US)
Cooling System 2.6 gal (US) 6.3 gal (US) 13.7 gal (US)
Diesel Exhaust Fluid (DEF) - 5.3 gal (US) -
Final Drive - 0.6 gal (US) -
Hydraulic System - Including Tank - 58.1 gal (US) 145.3 gal (US)
Fuel Tank Capacity - - 188.9 gal (US)
Engine Oil - With Filter - - 10.6 gal (US)
Swing Drive - - 2.8 gal (US)
Final Drive - Each - - 2.5 gal (US)
DEF Tank - - 12.2 gal (US)

Specifications

Note The 309 CR VAB specifications are based on a machine configured with a Long (L) Undercarriage. For specifications representing a 309 CR VAB with a Standard Undercarriage, please refer to the 308 CR information. - -

Certification - Cab

Top Guard ISO 10262:1998 (Level II) - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

Sound

Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) - -
Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
Note European Union Directive "2000/14/EC" - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).
Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. -

Machine Weight

Operating Weight Maximum - 39683 lb -
Note (1) - Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. -
Operating Weight Minimum - 33069 lb -

Drive

Maximum Travel Speed - 23 mile/h -

Swing Mechanism

Maximum Swing Torque - 28860 ft·lbf 138000 ft·lbf
Swing Speed - 9.1 r/min -

Dimensions

Boom - 5m (16' 6") LRE Boom 11.5 m (37'9")
Bucket - 0.76m3 (.78 yd3) HD 1.19 m³ (1.56 yd³)
Stick - 2.2m (7' 3") LRE Stick 8.5 m (27'11')
Counterweight Clearance - 4.1 ft 4.7 ft
Ground Clearance - 1.1 ft 2.3 ft
Shipping Height - Top of Cab - 3315 ft 11.1 ft
Shipping Length - 26.9 ft 54 ft
Tail Swing Radius - 7.1 ft 12.3 ft
Undercarriage Length - 16.1 ft -
Wheel Base - 8.2 ft -
Handrail Height - - 11.6 ft
Track Length - - 17.6 ft
Track Length to Center of Rollers - - 14.2 ft
Track Gauge - - 10.6 ft
Transport Width - - 13.6 ft

Working Ranges and Forces

Boom Type - VA Boom -
Bucket - 0.76m3 (0.99 y3) GD -
Stick - R2.2CB (7' 3") -
Digging Height - 17.4 ft -
Dump Height - 23 ft -
Reach at Ground Level - 28.4 ft -
Vertical Wall Digging Depth - 13.9 ft -
Note (1) - Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a -

Working Ranges & Forces

Maximum Digging Depth - - 42.8 ft
Boom - - LRE Boom 11.5 m (37'9")
Stick - - LRE Stick 8.5 m (27'11')
Bucket - - HD 1.19 m³ (1.56 yd³)
Maximum Reach at Ground Level - - 64.4 ft
Maximum Cutting Height - - 48.2 ft
Maximum Loading Height - - 39.4 ft
Minimum Loading Height - - 7.3 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - - 42.5 ft
Bucket Digging Force - ISO - - 31700 lbf
Stick Digging Force - ISO - - 23380 lbf
Add a Similar Product:
  • M322 Add
  • M319 Wheeled Excavator Add
  • M320 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • 395 Excavator Add
  • 352 Hydraulic Excavator Add