Compare Equipment Go Back

309 CR VAB Mini Hydraulic Excavator
352 LRE Long Reach Excavation Hydraulic Excavator

Engine

Net Power 69.5 hp - -
Note Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. - -
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC 69.5 hp - -
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C3.3B - -
Displacement 203 in³ 763 in³ 427.8 in²
Stroke 4.7 in 6 in 5.3 in
Bore 3.7 in 5 in 4.1 in
Gross Power - SAE J1995 74.3 hp - -
Net Power - ISO 9249 - 424 hp 171 hp
Net Power - ISO 9249 (DIN) - 429.9 hp (metric) 174 hp (metric)
Engine Model - Cat C13 C 7.1
Engine Power - ISO 14396:2002 - 425 hp 174 hp
Engine Power - ISO 14396 (DIN) - 431 hp (metric) 176 hp (metric)
Biodiesel Capability - Up to B20¹ Up to B20¹
Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Weights

Operating Weight 21477 lb 128800 lb -
Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, standard stick, blade and no bucket. - -
Minimum Operating Weight* 20121 lb - -
Maximum Operating Weight* 21477 lb - -
Note - Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. -

Dimensions - VAB In

Dig Depth 150.2 in - -
Cab Height 100 in - -
Maximum Blade Depth 19.1 in - -
Maximum Blade Height 16.1 in - -
Stick Length 71.7 in - -
Maximum Reach 256.5 in - -
Tail Swing without Counterweight 57.1 in - -
Vertical Wall 99.2 in - -
Swing Bearing Height 29.8 in - -
Track Belt/Shoe Width 17.7 in - -
Boom Swing Right 37 in - -
Overall Track Width 97.2 in - -
Overall Shipping Length 255.7 in - -
Maximum Dump Clearance 135.8 in - -
Boom in Reach 122.8 in - -
Maximum Reach at Ground Level 248 in - -
Transport Height 97.4 in - -
Overall Undercarriage Length 126 in - -
Ground Clearance 14 in - -
Tail Swing with Counterweight 62.4 in - -
Maximum Dig Height 205.5 in - -
Boom Swing Left 24 in - -

Blade

Height 17 in - -
Width - Wide 103.9 in - -
Width - Standard 97.2 in - -

Weight Increase from Minimum Configuration

Standard Stick 77 lb - -
Steel Tracks with Pads 728 lb - -
Counterweight 552 lb - -

Hydraulic System

Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down. - -
Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min - -
Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min - -
Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary (High Flow) - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary (High Flow) - Flow at Pump 37 gal/min - -
Operating Pressure - Travel 4134 psi - -
Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Digging Force - Stick - Standard 9509 lbf - -
Digging Force - Bucket 13946 lbf - -
Pump Flow at 2,400 rpm 62 gal/min - -
Operating Pressure - Swing 3626 psi - -
Operating Pressure - Equipment 4134 psi - -
Maximum Flow - Main System - 206 gal/min -
Maximum Pressure - Equipment - 5076 psi -
Maximum Pressure - Equipment - Lift Mode - 5511 psi -
Maximum Pressure - Travel - 5076 psi -
Maximum Pressure - Swing - 3771 psi -
Main System - Maximum Flow - Implement - - 95 gal/min
Maximum Pressure - Implement Circuit - Heavy Lift - - 5366 psi
Maximum Pressure - Implement Circuit - Travel Circuit - - 5076 psi
Maximum Pressure - Implement Circuit - Normal - - 5076 psi

Swing System

Boom Swing - Left 60 degrees - -
Boom Swing - Right 50 degrees - -
Machine Swing Speed 10.6 r/min - -

Dimensions - VAB Out

Ground Clearance 14 in - -
Cab Height 100 in - -
Boom in Reach 106.7 in - -
Vertical Wall 146.7 in - -
Swing Bearing Height 29.8 in - -
Maximum Dump Clearance 247.4 in - -
Overall Undercarriage Length 126 in - -
Maximum Reach at Ground Level 303.7 in - -
Tail Swing without Counterweight 57.1 in - -
Maximum Reach 310.4 in - -
Track Belt/Shoe Width 17.7 in - -
Overall Shipping Length 255.7 in - -
Maximum Blade Depth 19.1 in - -
Maximum Dig Height 322 in - -
Overall Track Width 97.2 in - -
Tail Swing with Counterweight 62.4 in - -
Stick Length 71.7 in - -
Maximum Blade Height 16.1 in - -
Boom Swing Right 37 in - -
Boom Swing Left 24 in - -
Transport Height 97.4 in - -
Dig Depth 136.2 in - -

Sustainability

Recyclability 96% - -

Travel System

Ground Pressure - Minimum Weight 5.1 psi - -
Travel Speed - High 3.1 mile/h - -
Maximum Traction Force - High Speed 6497 lbf - -
Travel Speed - Low 1.6 mile/h - -
Ground Pressure - Maximum Weight 5.5 psi - -
Maximum Traction Force - Low Speed 19064 lbf - -
Gradeability - Maximum 30 degrees - -

Service Refill Capacities

Fuel Tank 39 gal (US) - 124.2 gal (US)
Hydraulic System 29 gal (US) - -
Engine Oil 3 gal (US) - 3.4 gal (US)
Hydraulic Tank 14 gal (US) 57.3 gal (US) 52.8 gal (US)
Cooling System 2.6 gal (US) 13.7 gal (US) 10.6 gal (US)
Fuel Tank Capacity - 188.9 gal (US) -
Engine Oil - With Filter - 10.6 gal (US) -
Swing Drive - 2.8 gal (US) -
Final Drive - Each - 2.5 gal (US) -
Hydraulic System - Including Tank - 145.3 gal (US) 71.3 gal (US)
DEF Tank - 12.2 gal (US) -
Diesel Exhaust Fluid (DEF) - - 7.9 gal (US)

Specifications

Note The 309 CR VAB specifications are based on a machine configured with a Long (L) Undercarriage. For specifications representing a 309 CR VAB with a Standard Undercarriage, please refer to the 308 CR information. - -

Certification - Cab

Top Guard ISO 10262:1998 (Level II) - -
Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

Sound

Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) - -
Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
Note European Union Directive "2000/14/EC" - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). -
Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes.

Working Ranges & Forces

Maximum Digging Depth - 42.8 ft -
Boom - LRE Boom 11.5 m (37'9") -
Stick - LRE Stick 8.5 m (27'11') -
Bucket - HD 1.19 m³ (1.56 yd³) -
Maximum Reach at Ground Level - 64.4 ft -
Maximum Cutting Height - 48.2 ft -
Maximum Loading Height - 39.4 ft -
Minimum Loading Height - 7.3 ft -
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 42.5 ft -
Bucket Digging Force - ISO - 31700 lbf -
Stick Digging Force - ISO - 23380 lbf -

Swing Mechanism

Maximum Swing Torque - 138000 ft·lbf -
Swing Torque - - 44250 lb/ft

Dimensions

Boom - LRE Boom 11.5 m (37'9") VA 5.4m (17'10")
Stick - LRE Stick 8.5 m (27'11') 2.9m (9'2")
Bucket - HD 1.19 m³ (1.56 yd³) -
Shipping Height - Top of Cab - 11.1 ft -
Handrail Height - 11.6 ft -
Shipping Length - 54 ft 31.1 ft
Tail Swing Radius - 12.3 ft 9.2 ft
Counterweight Clearance - 4.7 ft 4.3 ft
Ground Clearance - 2.3 ft 1.25 ft
Track Length - 17.6 ft -
Track Length to Center of Rollers - 14.2 ft -
Track Gauge - 10.6 ft -
Transport Width - 13.6 ft -
Shipping Height with Falling Object Guard - - 11 ft
Support Point - - 11.3 ft
Wheel Base - - 9 ft

Machine Weight

Operating Weight Maximum - - 52911 lb
Operating Weight Minimum - - 44750 lb

Transmission

Forward/Reverse - 2nd Gear - - 18.6 mile/h
Forward/Reverse - 1st Gear - - 5.6 mile/h
Creeper Speed - 1st Gear - - 3.4 mile/h
Creeper Speed - 2nd Gear - - 9.3 mile/h
Drawbar Pull - - 28551 lbf
Maximum Gradeability - - 70%

Working Ranges and Forces

Boom Type - - VA 5.4m (17'10")
Stick - - 2.9m (9'2")
Bucket - - GD 1.2 m³ (1.7 yd³)
Maximum Loading Height - - 24.7 ft
Cutting Height - - 35.8 ft
Maximum Digging Depth - - 21.8 ft
Reach at Ground Level - - 33.4 ft
Vertical Wall Digging Depth - - 17.3 ft
Bucket Forces (ISO) - - 33946 lbf
Stick Forces (ISO) - - 23605 lbf
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - - 21.6 ft
Add a Similar Product:
  • M319 Wheeled Excavator Add
  • M320 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M314 Wheeled Excavator Add
  • Cat® 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • Cat® 395 Hydaulic Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add
  • Cat® 374 Hydraulic Excavator Add