Compare Equipment Go Back
308 CR Mini Hydraulic Excavator |
M314 Wheeled Excavator |
395 Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 69.5 HP | - | - |
Engine Model | Cat C3.3B | Cat C3.6 | Cat C18 |
Stroke | 4.7 in | 5 in | 7 in |
Bore | 3.7 in | 3.9 in | 6 in |
Gross Power - SAE J1995 | 74.3 HP | - | - |
Displacement | 203 in³ | 221 in³ | 1105 in³ |
Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 | 69.5 HP | - | - |
Engine Power - ISO 14396 | - | 134 HP | 543 HP |
Engine Power - ISO 14396 (DIN) | - | 136 hp (metric) | 551 hp (metric) |
Net Power - ISO 9249 | - | 134 HP | 542 HP |
Net Power - ISO 9249 (DIN) | - | 129 hp (metric) | 550 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | B20¹ |
Emissions | - | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
Operating Weight | 20077 lb | - | 207400 lb |
Note (1) | *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. | - | - |
Maximum Operating Weight with Cab** | 20077 lb | - | - |
Minimum Operating Weight with Cab* | 18610 lb | - | - |
Dimensions - Long Stick |
|||
Dig Depth | 182.8 in | - | - |
Boom Swing - Left | 23.8 in | - | - |
Maximum Dig Height | 277.1 in | - | - |
Maximum Blade Height | 14.6 in | - | - |
Track Belt/Shoe Width | 17.7 in | - | - |
Cab Height | 100 in | - | - |
Tail Swing with Counterweight | 62.4 in | - | - |
O/A Undercarriage Length | 113.4 in | - | - |
Maximum Dump Clearance | 199.7 in | - | - |
Boom Swing - Right | 36.8 in | - | - |
Maximum Blade Depth | 16 in | - | - |
Ground Clearance | 13.8 in | - | - |
Stick Length | 92.8 in | - | - |
Maximum Reach | 300.7 in | - | - |
Maximum Reach - Ground Level | 293.7 in | - | - |
Boom In Reach | 126.6 in | - | - |
Swing Bearing - Height | 29.7 in | - | - |
O/A Track Width | 90.6 in | - | - |
Tail Swing without Counterweight | 57.1 in | - | - |
Vertical Wall | 134 in | - | - |
Note | *Boom Height when stick is pinned in transport position with no attachments. | - | - |
Note (2) | ***With blade positioned at the rear of the machine. | - | - |
Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. | - | - |
Height - Boom Transport - No Tools* | 89 in | - | - |
Height - Boom Working - With Tools** | 120.1 in | - | - |
Overall Shipping Length - without Counterweight | 6872 mm (270.6 in)*** | - | - |
Overall Shipping Length - with Counterweight | 6872 mm (270.6 in)*** | - | - |
Blade |
|||
Height | 17 in | - | - |
Width - Standard | 90.6 in | - | - |
Width - Wide | 96.5 in | - | - |
Service Refill Capacities |
|||
Fuel Tank | 39 gal (US) | 77.9 gal (US) | - |
Hydraulic System | 29 gal (US) | - | - |
Hydraulic Tank | 14 gal (US) | 23.8 gal (US) | 98 gal (US) |
Cooling System | 2.6 gal (US) | 6.3 gal (US) | 19 gal (US) |
Engine Oil | 3 gal (US) | - | 18 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Final Drive | - | 0.6 gal (US) | - |
Hydraulic System - Including Tank | - | 58.1 gal (US) | 196 gal (US) |
Fuel Tank Capacity | - | - | 322 gal (US) |
Swing Drive | - | - | 6 gal (US) |
Final Drive - Each | - | - | 5 gal (US) |
DEF Tank | - | - | 21 gal (US) |
Hydraulic System |
|||
Digging Force - Bucket | 13946 lb | - | - |
Operating Pressure - Travel | 4134 psi | - | - |
Operating Pressure - Swing | 3626 psi | - | - |
Operating Pressure - Equipment | 4134 psi | - | - |
Digging Force - Stick - Long | 8032 lb | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
Pump Flow at 2,400 rpm | 44 gal/min | - | - |
Digging Force - Stick - Standard | 9509 lb | - | - |
Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134 psi | - | - |
Maximum Auxiliary Circuit - Primary - Flow at Pump | 35 gal/min | - | - |
Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9 gal/min | - | - |
Main System - Maximum Flow - Implement | - | 71 gal/min | 281 gal/min |
Maximum Pressure - Equipment | - | 5076 psi | 5366 psi |
Maximum Pressure - Swing | - | 5149 psi | 4496 psi |
Maximum Pressure - Travel | - | 5076 psi | 5076 psi |
Swing System |
|||
Machine Swing Speed | 10.6 r/min | - | - |
Boom Swing - Right | 50 degrees | - | - |
Boom Swing - Left | 60 degrees | - | - |
Certification - Cab |
|||
Top Guard | ISO 10262:1998 (Level I) | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Sound |
|||
Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
Note | European Union Directive "2000/14/EC" | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) | - | - |
Dimensions - Standard Stick |
|||
Cab Height | 100 in | - | - |
Vertical Wall | 117.8 in | - | - |
Boom In Reach | 120.4 in | - | - |
Tail Swing with Counterweight | 62.4 in | - | - |
Boom Swing - Right | 36.8 in | - | - |
Track Belt/Shoe Width | 17.7 in | - | - |
Maximum Reach | 281.1 in | - | - |
Stick Length | 71.7 in | - | - |
Maximum Blade Height | 14.6 in | - | - |
Boom Swing - Left | 23.8 in | - | - |
Maximum Blade Depth | 16 in | - | - |
O/A Track Width | 90.6 in | - | - |
Maximum Dig Height | 265.2 in | - | - |
Maximum Dump Clearance | 187.4 in | - | - |
Maximum Reach - Ground Level | 273.6 in | - | - |
Tail Swing without Counterweight | 57.1 in | - | - |
O/A Undercarriage Length | 113.4 in | - | - |
Swing Bearing - Height | 29.7 in | - | - |
Ground Clearance | 13.8 in | - | - |
Dig Depth | 161.7 in | - | - |
Note | *Boom Height when stick is pinned in transport position with no attachments. | - | - |
Overall Shipping Length - with Counterweight | 264 in | - | - |
Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. | - | - |
Overall Shipping Length - without Counterweight | 258.8 in | - | - |
Note (2) | ***With blade positioned at the rear of the machine. | - | - |
Height - Boom Working - With Tools** | 104.7 in | - | - |
Height - Boom Transport - No Tools* | 95.7 in | - | - |
Sustainability |
|||
Recyclability | 96% | 91% | 98% |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Weight Increase from Minimum Configuration |
|||
Steel Tracks with Pads | 752 lb | - | - |
Counterweight | 552 lb | - | - |
Long Stick | 146 lb | - | - |
Travel System |
|||
Maximum Traction Force - High Speed | 6250 lb | - | - |
Ground Pressure - Maximum Weight | 5.8 psi | - | - |
Ground Pressure - Minimum Weight | 5.4 psi | - | - |
Travel Speed - High | 3.2 mile/h | - | - |
Travel Speed - Low | 1.9 mile/h | - | - |
Maximum Traction Force - Low Speed | 15175 lb | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Machine Weight |
|||
Operating Weight Maximum | - | 39683 lb | - |
Note (1) | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. | - |
Operating Weight Minimum | - | 33069 lb | - |
Drive |
|||
Maximum Travel Speed | - | 23 mile/h | - |
Swing Mechanism |
|||
Maximum Swing Torque | - | 28860 ft·lbf | 267333 ft·lbf |
Swing Speed | - | 9.1 r/min | 6.26 r/min |
Dimensions |
|||
Boom | - | 5m (16' 6") | GP 8.4m (25'7") |
Bucket | - | 0.76m3 (.78 yd3) | SD 5.2m³ (6.8 yd³) |
Stick | - | 2.2m (7' 3") | R4.4m (14'5") |
Counterweight Clearance | - | 4.1 ft | 5.5 ft |
Ground Clearance | - | 1.1 ft | 2.9 ft |
Shipping Height - Top of Cab | - | 3315 ft | 12 ft |
Shipping Length | - | 26.9 ft | 49.6 ft |
Tail Swing Radius | - | 7.1 ft | 15.11 ft |
Undercarriage Length | - | 16.1 ft | - |
Wheel Base | - | 8.2 ft | - |
Handrail Height | - | - | 12.4 ft |
Track Length | - | - | 20.1 ft |
Track Length to Center of Rollers | - | - | 16.1 ft |
Track Gauge | - | - | 11.6 ft |
Transport Width | - | - | 12.9 ft |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Working Ranges and Forces |
|||
Boom Type | - | VA Boom | - |
Bucket | - | 0.76m3 (0.99 y3) GD | - |
Stick | - | R2.2CB (7' 3") | - |
Digging Height | - | 17.4 ft | - |
Dump Height | - | 23 ft | - |
Reach at Ground Level | - | 28.4 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | - |
Note (1) | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a | - |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | - | 31.9 ft |
Boom | - | - | GP 8.4m (25'7") |
Stick | - | - | R4.4m (14'5") |
Bucket | - | - | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | - | - | 48.3 ft |
Maximum Cutting Height | - | - | 44.5 ft |
Maximum Loading Height | - | - | 30.4 ft |
Minimum Loading Height | - | - | 9.11 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 31.4 ft |
Maximum Vertical Wall Digging Depth | - | - | 22.3 ft |
Bucket Digging Force - ISO | - | - | 86100 ft·lbf |
Stick Digging Force - ISO | - | - | 68540 ft·lbf |
Add a Similar Product:
- M320 Wheeled Excavator Add
- M322 Add
- M318 Wheeled Excavator Add
- M319 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 Hydraulic Excavator Add