Compare Equipment Go Back

307.5 Mini Hydraulic Excavator
395 Excavator

Engine

Net Power 54.8 HP - -
Engine Model Cat C2.4 Turbo Cat C18 -
Displacement 148 in³ 1105 in³ -
Gross Power - SAE J1995 57.9 HP - -
Bore 3.4 in 6 in -
Stroke 4 in 7 in -
Rated Net Power - 2,400 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 54.8 HP - -
Net Power - ISO 9249 - 542 HP -
Net Power - ISO 9249 (DIN) - 550 hp (metric) -
Engine Power - ISO 14396 - 543 HP -
Engine Power - ISO 14396 (DIN) - 551 hp (metric) -
Biodiesel Capability - B20¹ -
Emissions - Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. -
Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m -
Note (2) - ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -

Weights

Operating Weight 17905 lb 207400 lb -
Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. - -
Maximum Operating Weight with Cab** 17905 lb - -
Minimum Operating Weight with Cab* 16549 lb - -
Note (1) *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. -

Dimensions - Long Stick

Dig Depth 182.8 in - -
Cab Height 100 in - -
Maximum Blade Height 14.6 in - -
Track Belt/Shoe Width 17.7 in - -
Maximum Dump Clearance 225.1 in - -
O/A Undercarriage Length 108.7 in - -
O/A Track Width 86.6 in - -
Vertical Wall 161.9 in - -
Width over Upper House 88.6 in - -
Boom In Reach 88.6 in - -
Stick Length 86.9 in - -
Tail Swing with Counterweight 76 in - -
Maximum Reach 267.9 in - -
Ground Clearance 14.6 in - -
Swing Bearing - Height 29.7 in - -
Tail Swing without Counterweight 70.9 in - -
Maximum Dig Height 305.7 in - -
Maximum Blade Depth 16 in - -
Maximum Reach - Ground Level 262.6 in - -
Height - Boom Transport - No Tools 100.4 in - -
Overall Shipping Length - without Counterweight 240.9 in - -
Overall Shipping Length - with Counterweight 246.1 in - -
Note (1) Boom Height when stick is pinned in transport position with no attachments. - -
Height - Boom Working - With Tools 124 in - -
Note (2) Boom Height when stick is pinned in working position with attachments. - -

Blade

Height 17 in - -
Width 90 in - -

Weight Increase from Minimum Configuration

Long Stick 181 lb - -
Counterweight 552 lb - -
Steel Tracks with Pads 628 lb - -

Travel System

Maximum Traction Force - Low Speed 14035 lb - -
Maximum Traction Force - High Speed 5856 lb - -
Travel Speed - High 3.1 mile/h - -
Ground Pressure - Maximum Weight 5.5 psi - -
Travel Speed - Low 1.9 mile/h - -
Gradeability - Maximum 30 degrees - -
Ground Pressure - Minimum Weight 5.1 psi - -

Service Refill Capacities

Cooling System 2.6 gal (US) 19 gal (US) -
Hydraulic System 29 gal (US) - -
Hydraulic Tank 14 gal (US) 98 gal (US) -
Fuel Tank 38 gal (US) - -
Engine Oil 2.5 gal (US) 18 gal (US) -
Fuel Tank Capacity - 322 gal (US) -
Swing Drive - 6 gal (US) -
Final Drive - Each - 5 gal (US) -
Hydraulic System - Including Tank - 196 gal (US) -
DEF Tank - 21 gal (US) -

Hydraulic System

Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
Operating Pressure - Swing 3626 psi - -
Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down. - -
Pump Flow at 2,400 rpm 44 gal/min - -
Digging Force - Stick - Standard 8504 lb - -
Operating Pressure - Travel 4134 psi - -
Operating Pressure - Equipment 4134 psi - -
Digging Force - Stick - Long 7579 lb - -
Digging Force - Bucket 12272 lb - -
Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min - -
Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi - -
Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min - -
Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi - -
Main System - Maximum Flow - Implement - 281 gal/min -
Maximum Pressure - Equipment - 5366 psi -
Maximum Pressure - Travel - 5076 psi -
Maximum Pressure - Swing - 4496 psi -

Swing System

Machine Swing Speed 10 r/min - -

Certification - Cab

Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
Top Guard ISO 10262:1998 (Level I) - -
Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

Sound

Operator Sound Pressure (ISO 6396:2008) 72 dB(A) - -
Average Exterior Sound Pressure (ISO 6395:2008) 98 dB(A) - -
Note European Union Directive “2000/14/EC” - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains .90 kg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). -

Dimensions - Standard Stick

Tail Swing with Counterweight 76 in - -
Vertical Wall 141.6 in - -
Tail Swing without Counterweight 70.9 in - -
Stick Length 65.6 in - -
Boom In Reach 66.2 in - -
Track Belt/Shoe Width 17.7 in - -
Ground Clearance 14.6 in - -
O/A Track Width 86.6 in - -
Maximum Reach - Ground Level 242.1 in - -
O/A Undercarriage Length 108.7 in - -
Width over Upper House 88.6 in - -
Maximum Reach 247.9 in - -
Swing Bearing - Height 29.7 in - -
Maximum Blade Height 14.6 in - -
Maximum Blade Depth 16 in - -
Dig Depth 161.4 in - -
Maximum Dump Clearance 208.6 in - -
Cab Height 100 in - -
Maximum Dig Height 289.3 in - -
Height - Boom Working - With Tools 107.5 in - -
Overall Shipping Length - with Counterweight 245.3 in - -
Note (2) Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. - -
Overall Shipping Length - without Counterweight 240.2 in - -
Height - Boom Transport - No Tools 101.2 in - -
Note (1) Boom Height when stick is pinned in transport position with no attachments. - -

Sustainability

Recyclability 96% 98% -

Working Ranges & Forces

Maximum Digging Depth - 31.9 ft -
Boom - GP 8.4m (25'7") -
Stick - R4.4m (14'5") -
Bucket - SD 5.2m³ (6.8 yd³) -
Maximum Reach at Ground Level - 48.3 ft -
Maximum Cutting Height - 44.5 ft -
Maximum Loading Height - 30.4 ft -
Minimum Loading Height - 9.11 ft -
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom - 31.4 ft -
Maximum Vertical Wall Digging Depth - 22.3 ft -
Bucket Digging Force - ISO - 86100 ft·lbf -
Stick Digging Force - ISO - 68540 ft·lbf -

Swing Mechanism

Swing Speed - 6.26 r/min -
Maximum Swing Torque - 267333 ft·lbf -

Dimensions

Boom - GP 8.4m (25'7") -
Stick - R4.4m (14'5") -
Bucket - SD 5.2m³ (6.8 yd³) -
Shipping Height - Top of Cab - 12 ft -
Handrail Height - 12.4 ft -
Shipping Length - 49.6 ft -
Tail Swing Radius - 15.11 ft -
Counterweight Clearance - 5.5 ft -
Ground Clearance - 2.9 ft -
Track Length - 20.1 ft -
Track Length to Center of Rollers - 16.1 ft -
Track Gauge - 11.6 ft -
Transport Width - 12.9 ft -
Note - Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps -
Add a Similar Product:
  • M320 Wheeled Excavator Add
  • M322 Add
  • M319 Wheeled Excavator Add
  • M316 Wheeled Excavator Add
  • M318 Wheeled Excavator Add
  • M314 Wheeled Excavator Add
  • M315 Wheeled Excavator Add
  • 352 UHD Ultra High Demolition Hydraulic Excavator Add
  • 352 LRE Long Reach Excavation Hydraulic Excavator Add
  • 340 UHD Ultra High Demolition Hydraulic Excavator Add