CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    304 Mini Excavator
    View Product

    Engine
    Net Power 45 HP - -
    Engine Model C1.7 Turbo - -
    Gross Power - 2,400 rpm - SAE J1995:2014 48.4 HP - -
    Bore 3.3 in - -
    Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
    Stroke 3.9 in - -
    Displacement 101 in³ - -
    Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 45 HP - -
    Note Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. - -

    Weights
    Operating Weight 9867 lb - -
    Minimum Operating Weight with Canopy* 8655 lb - -
    Maximum Operating Weight with Canopy** 9647 lb - -
    Note (2) **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket. - -
    Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight. - -
    Maximum Operating Weight with Cab** 9867 lb - -
    Minimum Operating Weight with Cab* 8875 lb - -

    Dimensions - Long Stick
    Dig Depth 138.2 in - -
    Maximum Blade Depth 18.7 in - -
    O/A Shipping Height 100 in - -
    Maximum Dump Clearance 147.2 in - -
    Stick Length 66.7 in - -
    Maximum Dig Height 201.8 in - -
    Maximum Reach - Ground Level 214.4 in - -
    Track Width 66.9 in - -
    Tail Swing with Counterweight 51.2 in - -
    Swing Bearing - Height 21.9 in - -
    Boom Height - Shipping Position 75.2 in - -
    Boom Swing - Left 20.9 in - -
    Maximum Reach 219.3 in - -
    Boom In Reach 92.1 in - -
    Boom Swing - Right 28.7 in - -
    Track Belt/Shoe Width 13.8 in - -
    Vertical Wall 99.8 in - -
    Maximum Blade Height 16.5 in - -
    Note *Overall Shipping Length depends on blade position during shipment. - -
    Overall Shipping Length* 194.9 in - -
    Ground Clearance 12 in - -
    O/A Undercarriage Length 87 in - -
    Tail Swing without Counterweight 47.4 in - -

    Sustainability
    Recyclability 96% - -

    Weight Increase from Minimum Configuration
    Steel Tracks 430 lb - -
    Counterweight 496 lb - -
    Angle Blade 243 lb - -
    Long Stick 66 lb - -

    Travel System
    Ground Pressure - Minimum Weight 4.2 psi - -
    Maximum Traction Force - Low Speed 7329 lbf - -
    Travel Speed - Low 2.2 mile/h - -
    Ground Pressure - Maximum Weight 4.9 psi - -
    Travel Speed - High 3.2 mile/h - -
    Maximum Traction Force - High Speed 4271 lbf - -
    Gradeability - Maximum 30 degrees - -

    Service Refill Capacities
    Cooling System 2.9 gal (US) - -
    Engine Oil 1.6 gal (US) - -
    Hydraulic System 17 gal (US) - -
    Fuel Tank 17 gal (US) - -
    Hydraulic Tank 14 gal (US) - -

    Hydraulic System
    Operating Pressure - Travel 3553 psi - -
    Auxiliary Circuit - Secondary - Pressure 3553 psi - -
    Digging Force - Stick - Long 4316 lbf - -
    Auxiliary Circuit - Secondary - Flow 7 gal/min - -
    Pump Flow at 2,400 rpm 25 gal/min - -
    Operating Pressure - Swing 2611 psi - -
    Auxiliary Circuit - Primary - Flow 21 gal/min - -
    Auxiliary Circuit - Primary - Pressure 3553 psi - -
    Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down. - -
    Type Load Sensing Hydraulics with Variable Displacement Piston Pump - -
    Digging Force - Stick - Standard 4721 lbf - -
    Digging Force - Bucket 8588 lbf - -
    Operating Pressure - Equipment 3553 psi - -

    Swing System
    Boom Swing - Right 50 Degrees - -
    Machine Swing Speed 9 r/min - -
    Boom Swing - Left 78 Degrees - -

    Blade
    Angle Blade Height 14.2 in - -
    Straight Blade Height 14.2 in - -
    Straight Blade Width 66.9 in - -
    Angle Blade Width 66.9 in - -
    Angle Blade - Right 25 Degrees - -
    Angle Blade - Left 25 Degrees - -

    Certification - Cab and Canopy
    Roll Over Protective Structure (ROPS) ISO 12117-2:2008 - -
    Top Guard ISO 10262:1998 (Level I) - -
    Tip Over Protective Structure (TOPS) ISO 12117:1997 - -

    Sound
    Average Exterior Sound Pressure (ISO 6395:2008) 97 dB(A) - -
    Operator Sound Pressure (ISO 6396:2008) 76 dB(A) - -
    Note European Union Directive “2000/14/EC” - -

    Dimensions - Standard Stick
    Maximum Reach - Ground Level 204.7 in - -
    Vertical Wall 94.3 in - -
    Note *Overall Shipping Length depends on blade position during shipment. - -
    Tail Swing with Counterweight 51.2 in - -
    Boom In Reach 88.8 in - -
    Dig Depth 126.4 in - -
    Maximum Dig Height 198.4 in - -
    Maximum Blade Height 16.5 in - -
    Swing Bearing - Height 21.9 in - -
    Boom Swing - Left 20.9 in - -
    Stick Length 54.9 in - -
    O/A Undercarriage Length 87 in - -
    Track Belt/Shoe Width 13.8 in - -
    Boom Height - Shipping Position 63.8 in - -
    Boom Swing - Right 28.7 in - -
    Maximum Dump Clearance 143.5 in - -
    Ground Clearance 12 in - -
    Maximum Reach 209.8 in - -
    O/A Shipping Height 100 in - -
    Tail Swing without Counterweight 47.4 in - -
    Maximum Blade Depth 18.7 in - -
    Overall Shipping Length* 194.9 in - -
    Add a Similar Product:
    • M322 Add
    • M318 Wheeled Excavator Add
    • M319 Wheeled Excavator Add
    • M320 Wheeled Excavator Add
    • M315 Wheeled Excavator Add
    • M316 Wheeled Excavator Add
    • 352 LRE Long Reach Excavation Hydraulic Excavator Add
    • M314 Wheeled Excavator Add
    • 352 UHD Ultra High Demolition Hydraulic Excavator Add
    • 340 UHD Ultra High Demolition Hydraulic Excavator Add