Compare Equipment Go Back
302.7 CR Mini Hydraulic Excavator |
M318 Wheeled Excavator |
395 Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 23.6 HP | - | - |
Engine Model | C1.1 Turbo | C4.4 | Cat C18 |
Bore | 3 in | 4 in | 6 in |
Displacement | 69 in³ | 285.5 in³ | 1105 in³ |
Stroke | 3.2 in | 5 in | 7 in |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 23.6 HP | - | - |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Gross Power - 2,400 rpm - SAE J1995:2014 | 24.7 HP | - | - |
Engine Power - ISO 14396 | - | 174 HP | 543 HP |
Engine Power - ISO 14396 (DIN) | - | 176 hp (metric) | 551 hp (metric) |
Net Power - ISO 9249 | - | 171 HP | 542 HP |
Net Power - ISO 9249 (DIN) | - | 174 hp (metric) | 550 hp (metric) |
Biodiesel Capability | - | Up to B20¹ | B20¹ |
Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m |
Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
Operating Weight | 6725 lb | - | 207400 lb |
Minimum Operating Weight with Canopy* | 5645 lb | - | - |
Maximum Operating Weight with Canopy** | 6450 lb | - | - |
Minimum Operating Weight with Cab* | 5909 lb | - | - |
EU: CE Plate Weight with Canopy*** | 5942 lb | - | - |
EU: CE Plate Weight with Cab*** | 6174 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight. | - | - |
Note (1) | *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight. | - | Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device. |
Maximum Operating Weight with Cab** | 6725 lb | - | - |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | - | - |
Dimensions - Long Stick |
|||
Dig Depth | 106.7 in | - | - |
Boom Height - Shipping Position | 65 in | - | - |
Maximum Reach - Ground Level | 185.4 in | - | - |
Maximum Blade Height | 15.6 in | - | - |
Maximum Reach | 190.9 in | - | - |
Boom Swing - Left | 23.8 in | - | - |
Maximum Blade Depth | 20.3 in | - | - |
O/A Shipping Height | 97.6 in | - | - |
Maximum Dig Height | 172.8 in | - | - |
Stick Length | 49.6 in | - | - |
Tail Swing without Counterweight | 30.5 in | - | - |
Boom In Reach | 68.1 in | - | - |
Maximum Dump Clearance | 120.9 in | - | - |
Swing Bearing - Height | 22 in | - | - |
Vertical Wall | 80.7 in | - | - |
O/A Undercarriage Length | 79.1 in | - | - |
Ground Clearance | 12.2 in | - | - |
Track Belt/Shoe Width | 11.8 in | - | - |
Overall Shipping Length* | 168.5 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Tail Swing - with Extra Counterweight | 35 in | - | - |
Track Width | 61.8 in | - | - |
Tail Swing - with Light Counterweight | 33.3 in | - | - |
Boom Swing - Right | 32.7 in | - | - |
Blade |
|||
Height | 12.6 in | - | - |
Width | 61.8 in | - | - |
Hydraulic System |
|||
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
Auxiliary Circuit - Primary - Pressure | 3553 psi | - | - |
Digging Force - Stick - Standard | 3102 lbf | - | - |
Operating Pressure - Swing | 2553 psi | - | - |
Auxiliary Circuit - Secondary - Flow | 7 gal/min | - | - |
Auxiliary Circuit - Primary - Flow | 17 gal/min | - | - |
Auxiliary Circuit - Secondary - Pressure | 3553 psi | - | - |
Operating Pressure - Equipment | 3553 psi | - | - |
Digging Force - Stick - Long | 2765 lbf | - | - |
Digging Force - Bucket | 5238 lbf | - | - |
Operating Pressure - Travel | 3553 psi | - | - |
Pump Flow at 2,400 rpm | 26 gal/min | - | - |
Main System - Maximum Flow - Implement | - | 67 gal/min | 281 gal/min |
Maximum Pressure - Equipment | - | 5366 psi | 5366 psi |
Maximum Pressure - Swing | - | 5149 gal/min | 4496 psi |
Maximum Pressure - Travel | - | 5076 gal/min | 5076 psi |
Swing System |
|||
Machine Swing Speed | 9 r/min | - | - |
Boom Swing - Left | 75 Degrees | - | - |
Boom Swing - Right | 50 Degrees | - | - |
Certification - Cab and Canopy |
|||
Top Guard | ISO 10262:1998 (Level I) | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Sound |
|||
Operator Sound Pressure (ISO 6396:2008) | 78 dB(A) | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 94 dB(A) | - | - |
Note | European Union Directive “2000/14/EC” | - | - |
Dimensions - Standard Stick |
|||
Boom In Reach | 67.3 in | - | - |
O/A Shipping Height | 97.6 in | - | - |
Swing Bearing - Height | 22 in | - | - |
Stick Length | 41.7 in | - | - |
Maximum Reach | 183.5 in | - | - |
Maximum Dump Clearance | 116.1 in | - | - |
Maximum Dig Height | 168.1 in | - | - |
Tail Swing without Counterweight | 30.5 in | - | - |
Boom Swing - Right | 32.7 in | - | - |
O/A Undercarriage Length | 79.1 in | - | - |
Vertical Wall | 73.6 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Maximum Reach - Ground Level | 177.6 in | - | - |
Dig Depth | 98.8 in | - | - |
Track Belt/Shoe Width | 11.8 in | - | - |
Maximum Blade Height | 15.6 in | - | - |
Maximum Blade Depth | 20.3 in | - | - |
Boom Swing - Left | 23.8 in | - | - |
Ground Clearance | 12.2 in | - | - |
Boom Height - Shipping Position | 61.4 in | - | - |
Tail Swing - with Light Counterweight | 33.3 in | - | - |
Overall Shipping Length* | 166.9 in | - | - |
Tail Swing with Extra Counterweight | 35 in | - | - |
Sustainability |
|||
Recyclability | 95% | 92% | 98% |
Service Refill Capacities |
|||
Fuel Tank | 11.9 gal (US) | 92.5 gal (US) | - |
Cooling System | 1.1 gal (US) | 8.5 gal (US) | 19 gal (US) |
Hydraulic System | 9.2 gal (US) | - | - |
Hydraulic Tank | 4.8 gal (US) | 31.7 gal (US) | 98 gal (US) |
Engine Oil | 1.1 gal (US) | - | 18 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Hydraulic System - Including Tank | - | 68.7 gal (US) | 196 gal (US) |
Final Drive | - | 0.7 gal (US) | - |
Fuel Tank Capacity | - | - | 322 gal (US) |
Swing Drive | - | - | 6 gal (US) |
Final Drive - Each | - | - | 5 gal (US) |
DEF Tank | - | - | 21 gal (US) |
Weight Increase from Minimum Configuration |
|||
Steel Tracks | 221 lb | - | - |
Long Stick | 33 lb | - | - |
Cab | 276 lb | - | - |
Counterweight (extra) | 551 lb | - | - |
Counterweight (light) | 221 lb | - | - |
Travel System |
|||
Ground Pressure - Maximum Weight | 4.2 psi | - | - |
Ground Pressure - Minimum Weight | 3.5 psi | - | - |
Travel Speed - Low | 1.6 mile/h | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Maximum Traction Force - High Speed | 3507 lbf | - | - |
Travel Speed - High | 2.8 mile/h | - | - |
Maximum Traction Force - Low Speed | 6025 lbf | - | - |
Machine Weight |
|||
Operating Weight Maximum | - | 43980 lb | - |
Operating Weight Minimum | - | 38580 lb | - |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - |
Drive |
|||
Maximum Travel Speed | - | 21.7 mile/h | - |
Dimensions |
|||
Boom | - | 5205 mm (17'1") | GP 8.4m (25'7") |
Bucket | - | 0.91 m³ GD (1.19 yd³) | SD 5.2m³ (6.8 yd³) |
Stick | - | 2.5 m (8' 2") | R4.4m (14'5") |
Shipping Height - Top of Cab | - | 11 ft | 12 ft |
Shipping Length | - | 27.8 ft | 49.6 ft |
Counterweight Clearance | - | 4.3 ft | 5.5 ft |
Ground Clearance | - | 1.1 ft | 2.9 ft |
Support Point | - | 11.5 ft | - |
Tail Swing Radius | - | 7.7 ft | 15.11 ft |
Wheel Base | - | 8.9 ft | - |
Handrail Height | - | - | 12.4 ft |
Track Length | - | - | 20.1 ft |
Track Length to Center of Rollers | - | - | 16.1 ft |
Track Gauge | - | - | 11.6 ft |
Transport Width | - | - | 12.9 ft |
Note | - | - | Track gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps |
Working Ranges and Forces |
|||
Boom Type | - | VA Boom | - |
Bucket | - | 0.91 m³ GD (1.19 yd³) | - |
Digging Height | - | 19.3 ft | - |
Stick | - | 2.5 m (8' 2") | - |
Reach at Ground Level | - | 30.2 ft | - |
Vertical Wall Digging Depth | - | 15.1 ft | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - |
Bucket Forces (ISO) | - | 26752 lbf | - |
Stick Forces (ISO) | - | 16861 lbf | - |
Cutting Height | - | 33.7 ft | - |
Swing Mechanism |
|||
Maximum Swing Speed | - | 32560 ft·lbf | - |
Swing Speed | - | 9.4 r/min | 6.26 r/min |
Maximum Swing Torque | - | - | 267333 ft·lbf |
Service Refill |
|||
Engine Oil | - | 2.9 gal (US) | - |
Air Conditioning System |
|||
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | - | 31.9 ft |
Boom | - | - | GP 8.4m (25'7") |
Stick | - | - | R4.4m (14'5") |
Bucket | - | - | SD 5.2m³ (6.8 yd³) |
Maximum Reach at Ground Level | - | - | 48.3 ft |
Maximum Cutting Height | - | - | 44.5 ft |
Maximum Loading Height | - | - | 30.4 ft |
Minimum Loading Height | - | - | 9.11 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 31.4 ft |
Maximum Vertical Wall Digging Depth | - | - | 22.3 ft |
Bucket Digging Force - ISO | - | - | 86100 ft·lbf |
Stick Digging Force - ISO | - | - | 68540 ft·lbf |
Add a Similar Product:
- M322 Add
- M320 Wheeled Excavator Add
- M319 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 374 Hydraulic Excavator Add