Compare Equipment Go Back
301.5 Mini Hydraulic Excavator |
352 UHD Ultra High Demolition Hydraulic Excavator |
374 Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Net Power | 21 HP | - | - |
Engine Model | C1.1 | Cat C13 | Cat C15 |
Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. | - | - |
Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Note (1) | Engine power is tested per ISO 14396:2002. | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Gross Power - SAE J1995:2014 | 21.6 HP | - | - |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP | - | - |
Displacement | 69 in³ | 763 in³ | 928 in³ |
Stroke | 3.2 in | 6 in | 6.7 in |
Bore | 3 in | 5 in | 5.4 in |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Net Power - ISO 9249 | - | 424 HP | 484 HP |
Net Power - ISO 9249 (DIN) | - | 430 hp (metric) | 491 hp (metric) |
Engine Power - ISO 14396 (DIN) | - | 431 hp (metric) | 492 hp (metric) |
Engine Power - ISO 14396 | - | 425 HP | 485 HP |
Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
Weights |
|||
Operating Weight | 3913 lb | 143300 lb | 162900 lb |
Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. | - |
Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. | - | - |
Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. | - |
Maximum Operating Weight with Canopy** | 3913 lb | - | - |
EU: CE Plate Weight*** | 3836 lb | - | - |
Minimum Operating Weight with Canopy* | 3483 lb | - | - |
Machine Weight - Retrofit Configuration | - | 139300 lb | - |
UHD in Cradle | - | 26000 lb | - |
Retrofit Boom in Cradle - R3.9 TB Stick | - | 16310 lb | - |
Retrofit Boom in Cradle - R3.35 TB Stick | - | 15950 lb | - |
Retrofit Boom in Cradle - R2.9 TB Stick | - | 15760 lb | - |
Note | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Dimensions - Long Stick |
|||
Dig Depth | 100 in | - | - |
Tail Swing | 32.3 in | - | - |
O/A Undercarriage Length | 57.5 in | - | - |
Boom In Reach | 57.1 in | - | - |
O/A Shipping Height | 90.9 in | - | - |
Overall Shipping Length* | 141.3 in | - | - |
Maximum Dump Clearance | 98.8 in | - | - |
Minimum Ground Clearance Below Undercarriage | 6.1 in | - | - |
Boom Swing - Left | 65 ° | - | - |
Vertical Wall | 74.4 in | - | - |
Track Width - Retracted | 39 in | - | - |
Track Width - Expanded | 51.18 in | - | - |
Maximum Blade Depth | 10.2 in | - | - |
Maximum Reach - Ground Level | 153.1 in | - | - |
Swing Bearing - Height | 17.5 in | - | - |
Track Belt/Shoe Width | 9.1 in | - | - |
Boom Swing - Right | 50 ° | - | - |
Maximum Blade Height | 10.8 in | - | - |
Stick Length | 45.7 in | - | - |
Boom Height - Shipping Position | 40.9 in | - | - |
Maximum Reach | 155.9 in | - | - |
Maximum Dig Height | 137.4 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Blade |
|||
Height | 8.9 in | - | - |
Note | *Expanded – 1300 mm (51 in) | - | - |
Width* | 39 in | - | - |
Dimensions - Standard Stick |
|||
Vertical Wall | 70.9 in | - | - |
Dig Depth | 92.1 in | - | - |
Track Width - Expanded | 51.18 in | - | - |
Track Belt/Shoe Width | 9.1 in | - | - |
Maximum Dig Height | 135 in | - | - |
Overall Shipping Length* | 142.5 in | - | - |
Maximum Blade Height | 10.8 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Tail Swing | 32.3 in | - | - |
Boom Swing - Left | 65 ° | - | - |
Minimum Ground Clearance Below Undercarriage | 6.1 in | - | - |
Stick Length | 37.8 in | - | - |
Boom In Reach | 57.5 in | - | - |
Maximum Dump Clearance | 96.5 in | - | - |
Boom Swing - Right | 50 ° | - | - |
Boom Height - Shipping Position | 42.9 in | - | - |
Track Width - Retracted | 39 in | - | - |
Swing Bearing - Height | 17.5 in | - | - |
O/A Undercarriage Length | 57.5 in | - | - |
Maximum Reach - Ground Level | 146.9 in | - | - |
Maximum Reach | 149.6 in | - | - |
O/A Shipping Height | 90.9 in | - | - |
Maximum Blade Depth | 10.2 in | - | - |
Hydraulic System |
|||
Auxiliary Circuit - Primary - Flow | 8.7 gal/min | - | - |
Auxiliary Circuit - Secondary - Pressure | 3089.3 psi | - | - |
Operating Pressure - Travel | 3089.3 psi | - | - |
Operating Pressure - Equipment | 3089.3 psi | - | - |
Digging Force - Bucket | 3169.8 lbf | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Digging Force - Stick - Standard | 1843.4 lbf | - | - |
Auxiliary Circuit - Secondary - Flow | 3.7 gal/min | - | - |
Auxiliary Circuit - Primary - Pressure | 3089.3 psi | - | - |
Pump Flow at 2,400 rpm | 17.4 gal/min | - | - |
Digging Force - Stick - Long | 1616.4 lbf | - | - |
Operating Pressure - Swing | 1493.9 psi | - | - |
Main System - Maximum Flow | - | 779 l/min (206 gal/min) | - |
Maximum Pressure - Equipment | - | 5076 psi | 5366 psi |
Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | 5511 psi |
Maximum Pressure - Travel | - | 5076 psi | 5076 psi |
Maximum Pressure - Swing | - | 3771 psi | 5076 psi |
Main System - Maximum Flow - Implement | - | - | 237 gal/min |
Service Refill Capacities |
|||
Cooling System | 1 gal (US) | 13.7 gal (US) | 19 gal (US) |
Engine Oil | 1.2 gal (US) | 10.6 gal (US) | 16 gal (US) |
Hydraulic System | 6.9 gal (US) | - | - |
Fuel Tank | 5.8 gal (US) | - | - |
Hydraulic Tank | 4.8 gal (US) | 57.3 gal (US) | 86 gal (US) |
Fuel Tank Capacity | - | 188.9 gal (US) | 243 gal (US) |
Swing Drive - Each | - | 2.8 gal (US) | - |
Final Drive - Each | - | 2.5 gal (US) | 9 gal (US) |
Hydraulic System - Including Tank | - | 145.3 gal (US) | 164 gal (US) |
DEF Tank | - | 12.2 gal (US) | 21 gal (US) |
Swing Drive | - | - | 5 gal (US) |
Travel System |
|||
Ground Pressure - Maximum Weight | 4.4 psi | - | - |
Travel Speed - High | 2.7 mile/h | - | - |
Travel Speed - Low | 1.8 mile/h | - | - |
Maximum Traction Force - Low Speed | 3597 lbf | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Ground Pressure - Minimum Weight | 4 psi | - | - |
Maximum Traction Force - High Speed | 2315.5 lbf | - | - |
Swing System |
|||
Machine Swing Speed | 9.8 r/min | - | - |
Weight Increase from Minimum Configuration |
|||
Long Stick | 18 lb | - | - |
Steel Tracks | 126 lb | - | - |
Expandable Undercarriage | 284 lb | - | - |
Certification - Canopy |
|||
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Top Guard | ISO 10262:1998 (Level I) | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Sound |
|||
Note | European Union Directive “2000/14/EC” | - | - |
Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) | - | - |
Sustainability |
|||
Recyclability | 95% | - | - |
Working Ranges and Forces |
|||
Maximum Pin Height at Stick Nose | - | 90.8 ft | - |
Maximum Weight at Stick Nose | - | 8157 lb | - |
Maximum Working Pin Height at Stick Nose - 1/2 | - | 75.2 ft | - |
Maximum Working Reach at Stick Nose - 1/2 | - | 45.4 ft | - |
Maximum Height at Stick Nose in Max Reach Position | - | 52.9 ft | - |
Maximum Reach at Stick Nose | - | 51.7 ft | - |
Note (1) | - | 28 m (91' 10") UHD Front Over-the-Front | - |
Swing Mechanism - UHD Fronts |
|||
Swing Speed | - | 4.22 r/min | - |
Swing Mechanism |
|||
Swing Speed | - | 8.44 r/min | 6.34 r/min |
Maximum Swing Torque | - | 139000 ft·lbf | 220000 ft·lbf |
Dimensions |
|||
Note (1) | - | 28 m (91'10") UHD Front | - |
Shipping Height - Top of Cab | - | 11.1 ft | 11.8 ft |
Cab Height - With OPG | - | 11.8 ft | - |
Shipping Length | - | 61.8 ft | 44.9 ft |
Tail Swing Radius | - | 12.3 ft | 13.8 ft |
Counterweight Clearance | - | 4.7 ft | 4.1 ft |
Ground Clearance | - | 1.7 ft | 2.6 ft |
Track Length | - | 18.9 ft | 19.3 ft |
Track Length to Center of Rollers | - | 15.6 ft | 15.5 ft |
Working Gauge - Extended Position | - | 11.2 ft | - |
Shipping Gauge - Retracted Position | - | 7.9 ft | - |
Transport Width | - | 10.7 ft | 11.1 ft |
Machine Length - without Front, with Counterweight | - | 25.5 ft | - |
Machine Length - without Front and Counterweight | - | 24.9 ft | - |
Track Width - Extended | - | 13.1 ft | - |
Track Width - Retracted | - | 9.8 ft | - |
Note (2) | - | 600 mm (24") Track Shoes | - |
Boom | - | - | Reach 7.8m (25'7") |
Stick | - | - | R3.6m (11'10") |
Bucket | - | - | SD 3.3 m³ (4.32 yd³) |
Handrail Height | - | - | 13 ft |
Track Gauge | - | - | 11.2 ft |
Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
Note 1 | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) | - |
Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Pin Height at Stick Nose | - | 39.8 ft | - |
Maximum Weight at Stick Nose | - | 13190 lb | - |
Maximum Height at Stick Nose in Max Reach Position | - | 7.7 ft | - |
Maximum Reach at Stick Nose | - | 36.5 ft | - |
Maximum Digging Depth | - | 17 ft | - |
Maximum Reach - Ground Level | - | 41.9 ft | - |
Maximum Loading Height | - | 33.6 ft | - |
Minimum Loading Height | - | 15 ft | - |
Bucket Digging Force - ISO | - | 60250 lbf | - |
Stick Digging Force - ISO | - | 44740 lbf | - |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
Note 1 | - | Bent - R3.35 m (11'0") Stick | - |
Bucket | - | GD 3.08 m³ (4.03 yd³) | - |
Maximum Digging Depth | - | 21.9 ft | - |
Maximum Reach - Ground Level | - | 39 ft | - |
Maximum Cutting Height | - | 35.1 ft | - |
Maximum Loading Height | - | 24.6 ft | - |
Minimum Loading Height | - | 10 ft | - |
Bucket Digging Force - ISO | - | 60250 lbf | - |
Stick Digging Force - ISO | - | 44740 lbf | - |
Air Conditioning System |
|||
Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Working Ranges & Forces |
|||
Maximum Digging Depth | - | - | 28.1 ft |
Boom | - | - | Reach 7.8m (25'7") |
Stick | - | - | R3.6m (11'10") |
Bucket | - | - | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | - | - | 43.2 ft |
Maximum Cutting Height | - | - | 41.2 ft |
Maximum Loading Height | - | - | 27.7 ft |
Minimum Loading Height | - | - | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 27.8 ft |
Maximum Vertical Wall Digging Depth | - | - | 22.8 ft |
Bucket Digging Force - ISO | - | - | 80550 ft·lbf |
Stick Digging Force - ISO | - | - | 66390 ft·lbf |
Add a Similar Product: