Compare Equipment Go Back
 300.9D VPS & HPU300 Mini Hydraulic Excavator |
 M322 |
 M318 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power | 13 HP | - | - |
| Engine Model | Yanmar 3TNV70 | C 7.1 | C4.4 |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Engine Power - ISO 14396 | - | 174 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | - | 176 hp (metric) | 176 hp (metric) |
| Net Power - ISO 9249 | - | 171 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | - | 174 hp (metric) | 174 hp (metric) |
| Bore | - | 4.1 in | 4 in |
| Displacement | - | 427.8 in² | 285.5 in³ |
| Stroke | - | 5.3 in | 5 in |
| Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
| Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 2399 lb | - | - |
Dimensions |
|||
| Dig Depth | 68 in | - | - |
| Boom | - | VA 5.4m (17'10") | 5205 mm (17'1") |
| Stick | - | 2.9m (9'2") | 2.5 m (8' 2") |
| Shipping Height with Falling Object Guard | - | 11 ft | - |
| Support Point | - | 11.3 ft | 11.5 ft |
| Shipping Length | - | 31.1 ft | 27.8 ft |
| Tail Swing Radius | - | 9.2 ft | 7.7 ft |
| Counterweight Clearance | - | 4.3 ft | 4.3 ft |
| Ground Clearance | - | 1.25 ft | 1.1 ft |
| Wheel Base | - | 9 ft | 8.9 ft |
| Bucket | - | - | 0.91 m³ GD (1.19 yd³) |
| Shipping Height - Top of Cab | - | - | 11 ft |
Operating Specifications - 300.9D VPS |
|||
| Reach at Ground Level | 119 in | - | - |
| Bucket Force | 2000 lbf | - | - |
| Dumping Height - Maximum | 80 in | - | - |
| Stick Force | 1012 lbf | - | - |
Engine - 300.9D VPS |
|||
| Gross Power | 13 HP | - | - |
| Fuel Tank Capacity | 2.6 gal (US) | - | - |
| Engine Type | Liquid Cooled, 3 Cylinder, Diesel | - | - |
Dimensions - 300.9D VPS |
|||
| Operating Weight | 2399 lb | - | - |
| Shipping Weight | 2178 lb | - | - |
| Length × Width × Height | 2476 × 700 × 1507 mm (108 × 28 × 59 in) | - | - |
Hydraulic System - 300.9D VPS |
|||
| Operating Pressure - Swing Gear | 1015 psi | - | - |
| Operating Pressure - Front Linkage and Travel | 2466 psi | - | - |
| Rotation Speed | 8 r/min | - | - |
| Pump Flow | 6 gal/min | - | - |
| Hydraulic Tank Capacity | 3.7 gal (US) | - | - |
| Pump Type | Gear | - | - |
Blade - 300.9D VPS |
|||
| Lift Height | 8 in | - | - |
| Dig Depth | 7 in | - | - |
| Width | 28 in | - | - |
| Height | 8 in | - | - |
Hydraulics - HPU300 |
|||
| Flow Rate | 5.3 gal/min | - | - |
| Connecting Hose Length | 32.8 ft | - | - |
| Operating Pressure | 2756 psi | - | - |
| Hydraulic Oil Tank Capacity | 2.4 gal (US) | - | - |
Travel System - 300.9D VPS |
|||
| Travel Speed | 1.1 mile/h | - | - |
| Track Width | 7.1 in | - | - |
Motor - HPU300 |
|||
| Performance - North America | 12 HP | - | - |
| Performance - Europe | 10 HP | - | - |
| Input Current | 16A | - | - |
| Motor Type | 3 Phase Electric Motor | - | - |
Dimensions - HPU300 |
|||
| Length × Width × Height | 930 × 720 × 1000 mm (36.5 × 28.3 × 39.5 in) | - | - |
| Operating Weight | 423 lb | - | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 52911 lb | 43980 lb |
| Operating Weight Minimum | - | 44750 lb | 38580 lb |
| Note (1) | - | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. |
| Note (2) | - | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. |
Transmission |
|||
| Forward/Reverse - 2nd Gear | - | 18.6 mile/h | - |
| Forward/Reverse - 1st Gear | - | 5.6 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 28551 lbf | - |
| Maximum Gradeability | - | 70% | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | - | 95 gal/min | 67 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Maximum Pressure - Equipment | - | - | 5366 psi |
| Maximum Pressure - Swing | - | - | 5149 gal/min |
| Maximum Pressure - Travel | - | - | 5076 gal/min |
Swing Mechanism |
|||
| Swing Torque | - | 44250 lb/ft | - |
| Maximum Swing Speed | - | - | 32560 ft·lbf |
| Swing Speed | - | - | 9.4 r/min |
Service Refill Capacities |
|||
| Fuel Tank | - | 124.2 gal (US) | 92.5 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 5.3 gal (US) |
| Cooling System | - | 10.6 gal (US) | 8.5 gal (US) |
| Engine Oil | - | 3.4 gal (US) | - |
| Hydraulic Tank | - | 52.8 gal (US) | 31.7 gal (US) |
| Hydraulic System - Including Tank | - | 71.3 gal (US) | 68.7 gal (US) |
| Final Drive | - | - | 0.7 gal (US) |
Working Ranges and Forces |
|||
| Boom Type | - | VA 5.4m (17'10") | VA Boom |
| Stick | - | 2.9m (9'2") | 2.5 m (8' 2") |
| Bucket | - | GD 1.2 m³ (1.7 yd³) | 0.91 m³ GD (1.19 yd³) |
| Maximum Loading Height | - | 24.7 ft | - |
| Maximum Digging Depth | - | 21.8 ft | - |
| Reach at Ground Level | - | 33.4 ft | 30.2 ft |
| Vertical Wall Digging Depth | - | 17.3 ft | 15.1 ft |
| Bucket Forces (ISO) | - | 33946 lbf | 26752 lbf |
| Stick Forces (ISO) | - | 23605 lbf | 16861 lbf |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - |
| Digging Height | - | - | 19.3 ft |
| Note (1) | - | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o |
| Cutting Height | - | - | 33.7 ft |
working Ranges and Forces |
|||
| Cutting Height | - | 35.8 ft | - |
Air Conditioning System |
|||
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Drive |
|||
| Maximum Travel Speed | - | - | 21.7 mile/h |
Service Refill |
|||
| Engine Oil | - | - | 2.9 gal (US) |
Sustainability |
|||
| Recyclability | - | - | 92% |
Add a Similar Product:
-
M320 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
M314 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
374 Hydraulic Excavator Add