Compare Equipment Go Back
 300.9D Mini Hydraulic Excavator |
 352 LRE Long Reach Excavation Hydraulic Excavator |
 M320 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power | 13 HP | - | - |
| Engine Model | Yanmar 31NV70 | Cat C13 | C4.4 |
| Rated Speed | 2100 r/min | - | - |
| Maximum Engine Output | 18 HP | - | - |
| Gross Power - ISO 14396 | 18 HP | - | - |
| Diesel Tank Volume | 2.64 gal (US) | - | - |
| Displacement | 52 in³ | 763 in³ | 268.5 in³ |
| Flywheel Output ISO | 13 HP | - | - |
| Battery | 12 V, 20 Amp | - | - |
| Type | Water cooled model 3-cylinder diesel engine | - | - |
| Make/Type | Yanmar 31NV70 | - | - |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Net Power - ISO 9249 | - | 424 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | - | 429.9 hp (metric) | 174 hp (metric) |
| Engine Power - ISO 14396 | - | 425 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | - | 431 hp (metric) | 176 hp (metric) |
| Bore | - | 5 in | 4 in |
| Stroke | - | 6 in | 5.3 in |
| Biodiesel Capability | - | Up to B20¹ | Up to B20¹ |
| Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 2061 lb | 128800 lb | - |
| Operating Weight - Without Safety Frame | 2061 lb | - | - |
| Operating Weight - With Safety Frame | 2170 lb | - | - |
| Note | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. | - |
Dimensions |
|||
| Dig Depth | 68 in | - | - |
| Undercarriage Width - Extended | 2.83 ft | - | - |
| Width | 2.4 ft | - | - |
| Height - With ROPS Safety Frame Folded Down | 4.94 ft | - | - |
| Maximum Dump Height | 6.68 ft | - | - |
| Maximum Dozer Lift Height | 8 in | - | - |
| Length - Undercarriage | 4 ft | - | - |
| Maximum Vertical Dig Depth | 4.43 ft | - | - |
| Minimum Front Linkage Swing Radius | 3.77 ft | - | - |
| Boom Swing Angle - Left | 55 ° | - | - |
| Undercarriage Width - Retracted | 2.33 ft | - | - |
| Boom Swing Angle - Right | 56 ° | - | - |
| Maximum Reach | 10.09 ft | - | - |
| Maximum Reach - Ground Level | 9.92 ft | - | - |
| Transport Length - Arm Lowered | 9 ft | - | - |
| Track Width | 7 in | - | - |
| Tail Swing Radius | 2.41 ft | 12.3 ft | 8.5 ft |
| Maximum Dozer Dig Depth | 7 in | - | - |
| Maximum Dig Height | 9.39 ft | - | - |
| Height - With ROPS Safety Frame Unfolded | 7.47 ft | - | - |
| Boom | - | LRE Boom 11.5 m (37'9") | 5260 mm (17'3") |
| Stick | - | LRE Stick 8.5 m (27'11') | 2.5 m (8' 2") |
| Bucket | - | HD 1.19 m³ (1.56 yd³) | 0.98 m³ GD (1.28 yd³) |
| Shipping Height - Top of Cab | - | 11.1 ft | 11 ft |
| Handrail Height | - | 11.6 ft | - |
| Shipping Length | - | 54 ft | 29.3 ft |
| Counterweight Clearance | - | 4.7 ft | 4.3 ft |
| Ground Clearance | - | 2.3 ft | 1.4 ft |
| Track Length | - | 17.6 ft | - |
| Track Length to Center of Rollers | - | 14.2 ft | - |
| Track Gauge | - | 10.6 ft | - |
| Transport Width | - | 13.6 ft | - |
| Support Point | - | - | 11.8 ft |
| Wheel Base | - | - | 8.9 ft |
Hydraulic System |
|||
| Pumps | 2 gear pumps | - | - |
| Discharge Capacity | 11.4 + 11.4 L/min (3 + 3 gal/min) | - | - |
| Operating Pressure for the Work and Travel Hydraulics | 2466 psi | - | - |
| Operating Pressure Pivot | 1015 psi | - | - |
| Hydraulic Tank Capacity | 3.7 gal (US) | - | - |
| Maximum Flow - Main System | - | 206 gal/min | - |
| Maximum Pressure - Equipment | - | 5076 psi | 5366 psi |
| Maximum Pressure - Equipment - Lift Mode | - | 5511 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | 5076 gal/min |
| Maximum Pressure - Swing | - | 3771 psi | 5729 gal/min |
| Main System - Maximum Flow - Implement | - | - | 81 gal/min |
Operational Data |
|||
| Operating Weight - Without Safety Frame | 2061 lb | - | - |
| Digging Force - Bucket | 2000 lb | - | - |
| Digging Force - Stick | 1011 lb | - | - |
| Operating Weight - With Safety Frame | 2170 lb | - | - |
Chassis and Swivel Gear |
|||
| Gradeability | 30°/58% | - | - |
| Travel Speed | 1.12 mile/h | - | - |
| Track Width | 7 in | - | - |
| Ground Clearance | 5 in | - | - |
| Ground Pressure | 3.5 psi | - | - |
| Machine Swing Speed | 8 r/min | - | - |
| Number of Rollers - Each Side | 2 | - | - |
Operating Specifications |
|||
| Stick Length - Standard | 34.8 in | - | - |
| Machine Overhang | 12.5 in | - | - |
Dozer Blade |
|||
| Height | 8 in | - | - |
| Dig Depth | 7 in | - | - |
| Width | 28 in | - | - |
| Lift Height | 8 in | - | - |
Noise Emissions |
|||
| Sound Power Level (LWA) (to 2000/14/EG) | 93 dB(A) | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | - | 42.8 ft | - |
| Boom | - | LRE Boom 11.5 m (37'9") | - |
| Stick | - | LRE Stick 8.5 m (27'11') | - |
| Bucket | - | HD 1.19 m³ (1.56 yd³) | - |
| Maximum Reach at Ground Level | - | 64.4 ft | - |
| Maximum Cutting Height | - | 48.2 ft | - |
| Maximum Loading Height | - | 39.4 ft | - |
| Minimum Loading Height | - | 7.3 ft | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 42.5 ft | - |
| Bucket Digging Force - ISO | - | 31700 lbf | - |
| Stick Digging Force - ISO | - | 23380 lbf | - |
Swing Mechanism |
|||
| Maximum Swing Torque | - | 138000 ft·lbf | 37000 ft·lbf |
| Swing Speed | - | - | 9.2 r/min |
Service Refill Capacities |
|||
| Fuel Tank Capacity | - | 188.9 gal (US) | - |
| Cooling System | - | 13.7 gal (US) | 8.4 gal (US) |
| Engine Oil - With Filter | - | 10.6 gal (US) | - |
| Swing Drive | - | 2.8 gal (US) | - |
| Final Drive - Each | - | 2.5 gal (US) | - |
| Hydraulic System - Including Tank | - | 145.3 gal (US) | 71.3 gal (US) |
| Hydraulic Tank | - | 57.3 gal (US) | 40.9 gal (US) |
| DEF Tank | - | 12.2 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | - | - | 7.9 gal (US) |
| Final Drive | - | - | 0.7 gal (US) |
| Fuel Tank | - | - | 124.2 gal (US) |
Air Conditioning System |
|||
| Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - |
| Note | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Machine Weight |
|||
| Operating Weight Maximum | - | - | 46740 lb |
| Operating Weight Minimum | - | - | 41450 lb |
Transmission |
|||
| Maximum Travel Speed | - | - | 21.7 mile/h |
Working Ranges and Forces |
|||
| Boom Type | - | - | VA Boom |
| Bucket | - | - | 0.98 m³ GD (1.28 yd³) |
| Stick | - | - | 2.5 m (8' 2") |
| Reach at Ground Level | - | - | 30.5 ft |
| Vertical Wall Digging Depth | - | - | 13.9 ft |
| Cutting Height | - | - | 32.6 ft |
| Bucket Forces (ISO) | - | - | 30799 lbf |
| Stick Forces (ISO) | - | - | 20682 lbf |
| Note (1) | - | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). |
Add a Similar Product:
