U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
-
Bore
5.4 in
5.4 in
-
Stroke
6.75 in
6 in
-
Displacement
927 in³
1649.5 in³
-
Peak Torque - 1,200 rpm - SAE J1995
1778 ft·lbf
-
-
Torque Rise
16%
18 %
-
Net Power - SAE J1349 - Standard Ambient
-
699 HP
-
Net Power - SAE J1349 - High Ambient
-
648 HP
-
Peak Torque - 1,200 rpm
-
2624 lb/ft
-
Operating Specifications
Operating Weight
116858 lb
178517 lb
-
Rated Payload - Quarry Face
12.5 ton (US)
-
-
Bucket Capacity Range
6.4-7.6 m3 (8.3-10 yd3)
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
-
Cat Truck Match - High Lift
772/773/775
775-777
-
Rated Payload - Standard
-
17.5 ton (US)
-
Rated Payload - High Lift
-
17.5 ton (US)
-
Cat Truck Match - Standard
-
773-775
-
Transmission
Transmission Type
Cat planetary power shift
Cat planetary power shift
-
Forward - 1
5 mile/h
4.5 mile/h
-
Forward - 2
8 mile/h
8.3 mile/h
-
Reverse - 1
5 mile/h
4.9 mile/h
-
Reverse - 2
8 mile/h
9.1 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
Lock-up disabled
-
Direct Drive - Forward 2
8 mile/h
8.5 mile/h
-
Direct Drive - Forward 3
14 mile/h
15.2 mile/h
-
Direct Drive - Forward 4
24 mile/h
-
-
Direct Drive - Reverse 1
Lock-up disabled
5.4 mile/h
-
Direct Drive - Reverse 2
9 mile/h
9.6 mile/h
-
Direct Drive - Reverse 3
16 mile/h
16.4 mile/h
-
Direct Drive - Reverse 4
25.4 mile/h
-
-
Forward - 3
-
14.2 mile/h
-
Reverse - 3
-
15.5 mile/h
-
Note
-
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH - Load Sense
Positive flow control
-
Lift/Tilt System
2X x 145 cc Variable displacement piston
Variable displacement piston
-
Maximum Flow at 2,165 rpm
159 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4598 psi
4786 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
190 mm x 1216 mm (7.5 in x 48 in)
235 mm × 1287 mm (9.3 in × 50.7 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
170 mm x 722 mm (6.7 in x 28.4 in)
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
Pilot System
Variable displacement piston
Open loop and pressure reducing
-
Tilt Cylinder - Stroke
27 in
-
-
Maximum Flow at 1,800 rpm (1)
-
240 gal/min
-
Relief Valve Setting - Main
-
507 psi
-
Hydraulic Cycle Times
Rack Back
3.8 s
4.3 s
-
Raise
7.5 s
8.2 s
-
Dump
3 s
2.9 s
-
Lower Float Down
4.6 s
3.6 s
-
Total Hydraulic Cycle Time - Empty Bucket
18.9 s
13.8 s
-
Lower
-
3.7 s
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Pilot, load sensing
-
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
-
Maximum Flow
52 gal (US)
-
-
Relief Valve Setting - Steering
4000 psi
5004 psi
-
Total Steering Angle
70°
70°
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
5.2 s
-
-
Maximum Flow at 1,400 rpm
-
96.2 gal/min
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
+/-12.5°
8.5°
-
Brakes
Brakes
ISO 3450:2011
ISO 3450: 2011
-
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Service Refill Capacities
Fuel Tank
141 gal (US)
294.3 gal (US)
-
Cooling System
27 gal (US)
54.9 gal (US)
-
Engine Crankcase
9 gal (US)
20 gal (US)
-
Diesel Exhaust Fluid Tank
5.5 gal (US)
-
-
Transmission
20 gal (US)
29.1 gal (US)
-
Differential - Final Drives - Front
49 gal (US)
71.6 gal (US)
-
Differential - Final Drives - Rear
45 gal (US)
68.9 gal (US)
-
Note
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l
-
Hydraulic System Factory Fill
-
210 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
-
68.9 gal (US)
-
Hydraulic Tank - Steering and Braking
-
34.9 gal (US)
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
72 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
13.5 ft
-
-
Ground to Top of Exhaust Stacks
13.3 ft
-
-
Ground to Top of Hood
10.7 ft
-
-
Rear Axle - Centerline to Bumper
10.3 ft
-
-
Front Axle Centerline to Bucket Tip
15.7 ft
-
-
Wheel Base
12.5 ft
-
-
Maximum Overall Length
39.5 ft
-
-
Ground to Lower Hitch Clearance
1.5 ft
-
-
Clearance at Maximum Lift
12 ft
-
-
B-Pin Height - Maximum Lift
18.7 ft
-
-
Maximum Overall Height - Bucket Raised
25 ft
-
-
Reach - Maximum Lift
7.7 ft
-
-
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
