Compare

Compare Equipment Go Back

Operating Specifications
	988 GC Wheel Loader View Product	990 Wheel Loader View Product Remove	988 Wheel Loader View Product Remove	995 Wheel Loader View Product Remove	914 Compact Wheel Loader View Product Remove
Operating Weight	112426 lb	-	112574 lb	-	-
Bucket Capacity Range	6.4-7.6 m3 (8.3-10 yd3)	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	4.7-13 m3 (6.2-17 yd3)	17.2-43.6 m3 (22.3-57 yd3)	-
Rated Payload - Quarry Face	12.5 ton (US)	-	12.5 t	-	-
Cat Truck Match - High Lift	772/773/775	775-777	773 - 775	789/793/794	-
Operating Weight - Standard	-	178517 lb	-	543772 lb	-
Rated Payload - Standard	-	17.5 ton (US)	-	-	-
Rated Payload - High Lift	-	17.5 ton (US)	-	-	-
Cat Truck Match - Standard	-	773-775	770 - 772	785/789	-
Rated Payload - Loose Material	-	-	16 t	-	-
Operating Weight - High Lift	-	-	-	547675 lb	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	-	60 ton (US)	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	-	55 ton (US)	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)	-
Note	-	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-
Engine
Engine Model	Cat® C15	Cat® C27	Cat® C18	Cat® 3516E	Cat C3.6
Rated Speed	2000 rpm	1800 r/min	1700/rpm	-	-
Peak Power Speed	1600 rpm	-	1500/rpm	-	-
Gross Power - SAE J1995:2014	456 hp	766 hp	588 hp	1870 hp	-
Net Power - SAE J1349:2011	448 hp	-	538 hp	-	-
Bore	5.4 in	5.4 in	5.7 in	6.7 in	3.85 in
Stroke	6.75 in	6 in	7.2 in	8.5 in	4.72 in
Displacement	927 in³	1649.5 in³	1105 in³	4766 in³	220 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lbf·ft	-	-	-	-
Torque Rise	16%	18 %	58 %	39%	-
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	The power ratings apply when tested under the reference conditions for the specified standard.	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-
Note (3)	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	-	-	The gross power advertised is with the fan at maximum speed.	-
Engine Power - ISO 14396:2002	-	752 hp	580 hp	-	-
Emissions	-	Option 2 - Emits equivalent to U.S. EPA Tier 2	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.
Net Power - SAE J1349:2011 - Standard Ambient	-	699 hp	-	-	-
Net Power - SAE J1349:2011 - High Ambient	-	648 hp	-	-	-
Peak Torque - 1,200 rpm	-	2624 lb/ft	2104 lbf·ft	-	-
Note	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Engine Power - ISO 14396	-	-	-	1847 hp	-
Net Power - SAE J1349 - Standard Ambient	-	-	-	1739 hp	-
Net Power - SAE J1349 - High Ambient	-	-	-	1696 hp	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	-	8549 lb/ft	-
Maximum Gross Power	-	-	-	-	110 hp
Rated Net Power - Rated Engine Speed	-	-	-	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	-	-	-	1800 r/min
Rated Net Power - SAE J1349	-	-	-	-	99 hp
Maximum Gross Power - ISO 14396 (metric)	-	-	-	-	112 hp
Rated Net Power - ISO 9249	-	-	-	-	98 hp
Maximum Gross Torque - SAE J1995	-	-	-	-	335 ft·lbf
Maximum Gross Torque - ISO 14396	-	-	-	-	332 ft·lbf
Maximum Net Torque - SAE J1349	-	-	-	-	329 ft·lbf
Maximum Net Torque - ISO 9249	-	-	-	-	327 ft·lbf
Maximum Gross Power - ISO 14396	-	-	-	-	110 hp
Transmission
Transmission Type	Cat planetary power shift	Cat planetary power shift	Cat planetary powershift	Cat Planetary Power Shift	-
Forward - 1	5 mile/h	4.6 mile/h	4 mile/h	4.6 mile/h	-
Forward - 2	8 mile/h	8.2 mile/h	7.2 mile/h	8 mile/h	-
Reverse - 1	5 mile/h	5.1 mile/h	4.7 mile/h	5 mile/h	-
Reverse - 2	8 mile/h	9.1 mile/h	8.3 mile/h	8.8 mile/h	-
Direct Drive - Forward 1	Lock-up disabled	Lock-up disabled	Lock-up disabled	Lock-up disables	-
Direct Drive - Forward 2	8 mile/h	8.2 mile/h	7.8 mile/h	8.7 mile/h	-
Direct Drive - Forward 3	14 mile/h	14.5 mile/h	13.9 mile/h	15.2 mile/h	-
Direct Drive - Forward 4	24 mile/h	-	24.4 mile/h	-	-
Direct Drive - Reverse 1	Lock-up disabled	5.1 mile/h	5 mile/h	Lock-up disables	-
Direct Drive - Reverse 2	9 mile/h	9.1 mile/h	8.9 mile/h	9.6 mile/h	-
Direct Drive - Reverse 3	16 mile/h	16 mile/h	15.8 mile/h	16.8 mile/h	-
Direct Drive - Reverse 4	25.4 mile/h	-	-	-	-
Note	Travel speeds based on 35/65-R33 tires.	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward - 3	-	14.5 mile/h	12.7 mile/h	13.6 mile/h	-
Reverse - 3	-	16 mile/h	14.4 mile/h	14.9 mile/h	-
Forward - 4	-	-	21.6 mile/h	-	-
Forward and Reverse - Speed Range 3	-	-	-	-	25 mile/h
Forward and Reverse - Speed Range 1*	-	-	-	-	6.3 mile/h
Forward and Reverse - Speed Range 2*	-	-	-	-	12.5 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH - Load Sense	Positive flow control	EH- Positive Flow Control, Flow Sharing	Positive Flow Control	-
Lift/Tilt System - Pump	Variable displacement piston	-	Variable displacement piston	Variable Displacement Piston	-
Maximum Flow at 2,165 rpm	159 gpm	-	-	-	-
Relief Valve Setting - Lift/Tilt	4598 psi	4786 psi	4757 psi	5004 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	190 mm x 1216 mm (7.5 in x 48 in)	235 mm × 1287 mm (9.3 in × 50.7 in)	210 mm × 1050 mm (8.7 in × 41.3 in)	370 × 1713 mm (14.6 × 67.4 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	170 mm x 722 mm (6.7 in x 28.4 in)	292.1 mm × 820 mm (11.5 in × 32.3 in)	266 mm × 685 mm (8.7 in × 27 in)	310 × 1086 mm (12.2 × 42.8 in)	-
Pilot System	Variable displacement piston	Open loop and pressure reducing	Variable displacement piston	Open Loop and Pressure Reducing	-
Relief Valve Setting	500 psi	-	-	-	-
Lift/Tilt System	-	Variable displacement piston	-	-	-
Maximum Flow at 1,800 rpm	-	240 gpm	-	-	-
Pilot Relief Setting	-	507 psi	-	-	-
Maximum Flow at 1,400-1,860 rpm	-	-	153 gpm	-	-
Relief Valve Setting - Main	-	-	551 psi	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	-	-	541 gpm	-
Hydraulic Cycle Times
Rack Back	3.8 s	4.3 s	-	4.9 s	-
Raise	7.5 s	8.6 s	-	12.6 s	-
Dump	3 s	2.9 s	-	3.1 s	-
Lower Float Down	4.6 s	3.7 s	-	4.2 s	-
Total Hydraulic Cycle Time - Empty Bucket	18.9 s	13.8 s	-	-	-
Lower	-	3.7 s	-	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, load sensing	Pilot, load sensing	Pilot, Load Sensing	-
Steering System - Pump	Piston, variable displacement	Piston, variable displacement	Piston, variable displacement	Piston, Variable Displacement	-
Maximum Flow at 2,165 rpm	52 gpm	-	-	-	-
Relief Valve Setting - Steering	4000 psi	5004 psi	4351 psi	-	-
Total Steering Angle	70°	70°	86 °	80 degrees	-
Steering Cycle Times - High Idle	3 s	-	3.4 s	4.3 s	-
Steering Cycle Times - Low Idle	5.2 s	-	5.6 s	7.6 s	-
Maximum Flow at 1,400 rpm	-	96.2 gpm	-	-	-
Maximum Flow at 1,400-1,600 rpm	-	-	71.3 gpm	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	-
Axles
Front	Fixed	Fixed	Fixed	Fixed	Fixed; Locking differential (standard)
Rear	Trunnion	Trunnion	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)
Oscillation Angle	+/-12.5°	8.5°	13 °	9°	-
Brakes
Brakes	ISO 3450:2011	ISO 3450: 2011	ISO 3450:2011	ISO 3450:2011	-
Operator's Cab
ROPS/FOPS	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	72 dB(A)	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	116 dB(A)	111 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	109 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	*Sound suppression equipped	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	114 dB(A)	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	112 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	72 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	141 gal (US)	281 gal (US)	188 gal (US)	-	43.6 gal (US)
Cooling System	27 gal (US)	54.9 gal (US)	31.7 gal (US)	-	5.7 gal (US)
Engine Crankcase	9 gal (US)	20 gal (US)	-	-	2.6 gal (US)
Diesel Exhaust Fluid Tank	5.5 gal (US)	-	-	-	-
Transmission	20 gal (US)	29.1 gal (US)	24.3 gal (US)	-	0.8 gal (US)
Differential - Final Drives - Front	49 gal (US)	71.6 gal (US)	49.1 gal (US)	-	-
Differential - Final Drives - Rear	45 gal (US)	68.9 gal (US)	49.1 gal (US)	-	-
Hydraulic System Factory Fill	94 gal (US)	210 gal (US)	125.5 gal (US)	-	-
Note	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank - Implement and Hydraulic Fan	-	68.9 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	-	34.9 gal (US)	-	-	-
Coolant (Validated by Test Cell Fill Quantities)	-	-	33 gal (US)	-	-
Crankcase	-	-	15.9 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	-	-	8.7 gal (US)	-	-
Transmission - Validated by Test Cell Fill Quantities	-	-	29 gal (US)	-	-
Hydraulic System - Tank Only	-	-	63.4 gal (US)	-	-
Axles - Rear Center Differential	-	-	-	-	2 gal (US)
Hydraulic System - Including Tank	-	-	-	-	25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	-	-	4.8 gal (US)
Hydraulic Tank	-	-	-	-	14.5 gal (US)
Axles - Front Center Differential	-	-	-	-	2 gal (US)
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.5 ft	-	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-	-
Ground to Fuel Tank Clearance	2.2 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	16.7 ft	-	-	-	-
Wheel Base	12.5 ft	-	-	-	-
Maximum Overall Length	39.5 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Clearance at Maximum Lift (45° Dump)	12 ft	-	-	-	-
B-Pin Height - Maximum Lift	18.7 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25 ft	-	-	-	-
Reach at Maximum Lift (45° Dump)	7.7 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	-	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	-	116 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	-	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	114 dB(A)	-	-	-
Note (1)	-	*Sound suppression equipped	-	-	-
Note (2)	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (3)	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (4)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	17.2 ft	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	16.6 ft	14.8 ft	-	-
Ground to Top of Hood	-	12.7 ft	10.9 ft	-	-
Ground to Bumper Clearance	-	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	-	12.5 ft	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	15.4 ft	14 ft	-	-
Wheel Base	-	15.1 ft	14.9 ft	-	-
Maximum Overall Length	-	42.9 ft	39.3 ft	-	-
Ground to Lower Hitch Clearance	-	2 ft	1.9 ft	-	-
Ground to Center of Front Axle	-	4.2 ft	-	-	-
Clearance at Maximum Lift	-	7.2 ft	11.9 ft	-	-
Rack Back Angle at Ground Level	-	40.4°	-	-	-
Rack Back Angle at Carry	-	48.8°	-	-	-
B-Pin Height - Maximum Lift	-	19.7 ft	18 ft	-	-
Maximum Overall Height - Bucket Raised	-	27.2 ft	24.5 ft	-	-
Rack Angle at Maximum Lift	-	63.7°	-	-	-
Dump Angle at Maximum Lift	-	45°	-	-	-
Reach - Maximum Lift	-	7.2 ft	6.5 ft	-	-
Note	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	17.2 ft	13.8 ft	-	-
Ground to Top of Exhaust Stacks	-	16.6 ft	14.8 ft	-	-
Ground to Top of Hood	-	12.7 ft	10.9 ft	-	-
Ground to Bumper Clearance	-	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	-	12.5 ft	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	-	17.8 ft	15.3 ft	-	-
Wheel Base	-	15.1 ft	14.9 ft	-	-
Maximum Overall Length	-	45.3 ft	40.7 ft	-	-
Ground to Lower Hitch Clearance	-	2 ft	1.9 ft	-	-
Ground to Center of Front Axle	-	4.2 ft	-	-	-
Clearance at Maximum Lift	-	14.8 ft	13.3 ft	-	-
Rack Back Angle at Ground Level	-	39.9°	-	-	-
Rack Back Angle at Carry	-	49.3°	-	-	-
B-Pin Height - Maximum Lift	-	21.2 ft	19.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	28.7 ft	25.8 ft	-	-
Rack Angle at Maximum Lift	-	60.6°	-	-	-
Dump Angle at Maximum Lift	-	51°	-	-	-
Reach - Maximum Lift	-	8.5 ft	6.8 ft	-	-
Note	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	-	-	4.5 s	-	-
Raise	-	-	8 s	-	-
Dump	-	-	2.2 s	-	-
Lower Float Down	-	-	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	-	18.2 s	-	-
Complete System Fill
Fuel Tank - Standard	-	-	-	856 gal (US)	-
Fuel Tank - With 24 hr Attachment	-	-	-	1414 gal (US)	-
Cooling System	-	-	-	138 gal (US)	-
Engine Crankcase	-	-	-	76 gal (US)	-
Transmission	-	-	-	110 gal (US)	-
Differential - Final Drives - Front	-	-	-	220 gal (US)	-
Differential - Final Drives - Rear	-	-	-	200 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	270 gal (US)	-
Hydraulic Tank - Steering and Braking	-	-	-	100 gal (US)	-
Oil Renewal System (ORS)*	-	-	-	20 gal (US)	-
Note	-	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	-	-	109.4 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	-	131 °F	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	-	127.4 °F	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	74 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	-	119 dB(A)	-
Note	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	73 dB(A)	-
Machine Sound Level (ISO 6395:2008)	-	-	-	117 dB(A)	-
Note	-	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	28.8 ft	-
Clearance at Maximum Lift	-	-	-	19.8 ft	-
Dump Angle at Maximum Lift	-	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	-	21.9 ft	-
Ground to Bumper Clearance	-	-	-	4.4 ft	-
Ground to Center of Axles	-	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	-	23.2 ft	-
Ground to Top of Hood	-	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	-	39.3 ft	-
Maximum Overall Length	-	-	-	64.6 ft	-
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	-	59.5 degrees	-
Rack Back Angle - Carry	-	-	-	47.7 degrees	-
Rack Back Angle - Ground Level	-	-	-	39.7 degrees	-
Reach - Maximum Lift	-	-	-	9.6 ft	-
Rear Axle - Centerline to Bumper	-	-	-	20.4 ft	-
Tread Width	-	-	-	14.1 ft	-
Wheel Base	-	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	-	18.8 ft	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	-	-	31.6 ft	-
Clearance at Maximum Lift	-	-	-	22.6 ft	-
Dump Angle at Maximum Lift	-	-	-	–50.0 degrees	-
Front Axle Centerline to Bucket Tip	-	-	-	24.2 ft	-
Ground to Bumper Clearance	-	-	-	4.4 ft	-
Ground to Center of Axles	-	-	-	6 ft	-
Ground to Lower Hitch Clearance	-	-	-	2.9 ft	-
Ground to Top of Exhaust Stacks	-	-	-	23.2 ft	-
Ground to Top of Hood	-	-	-	18.6 ft	-
Ground to Top of ROPS	-	-	-	23.4 ft	-
Maximum Overall Height - Bucket Raised	-	-	-	42.1 ft	-
Maximum Overall Length	-	-	-	66.9 ft	-
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-
Rack Angle at Maximum Lift	-	-	-	59.4 degrees	-
Rack Back Angle - Carry	-	-	-	53.5 degrees	-
Rack Back Angle - Ground Level	-	-	-	45 degrees	-
Reach - Maximum Lift	-	-	-	9.4 ft	-
Rear Axle - Centerline to Bumper	-	-	-	20.4 ft	-
Tread Width	-	-	-	14.1 ft	-
Wheel Base	-	-	-	22.3 ft	-
Width - Over Tires - With Bulge	-	-	-	18.8 ft	-
Weights
Operating Weight	-	-	-	-	19103 lb
Buckets
Bucket Capacities	-	-	-	-	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)
Sustainability
Recyclability	-	-	-	-	95%
Cab
ROPS	-	-	-	-	ISO 3471:2008
FOPS	-	-	-	-	ISO 3449:2005
Note (4)	-	-	-	-	*The measurements were conducted with the cab doors and windows closed.
Note (2)	-	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	-	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	-	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Steering
Maximum Flow - Steering Pump	-	-	-	-	22 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	-	3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	-	2.8 s
Maximum Working Pressure - Steering Pump	-	-	-	-	3263 psi
Steering Articulation Angle - Each Direction	-	-	-	-	40 °
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	-	-	3046 psi
Maximum Flow - Implement Pump	-	-	-	-	39 gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	-	24 gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	-	-	3046 psi
Hydraulic Cycle Time - Total Cycle Time	-	-	-	-	12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	-	5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	-	-	24 gpm
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	-	1.4 s
Relief Pressure - Tilt Cylinder	-	-	-	-	4931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	-	32 gpm
Maximum Working Pressure - Implement Pump	-	-	-	-	4061 psi
Hydraulic Cycle Time - Rackback	-	-	-	-	2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	-	3.7 s
Tires
Other Choices Include	-	-	-	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)	-	-	-	-	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	-	-	-	-	17.5 R25 L2 XTLA
Note (3)	-	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Compare Equipment Go Back

988 GC Wheel Loader

990 Wheel Loader

988 Wheel Loader

995 Wheel Loader

914 Compact Wheel Loader

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Hydraulic Cycle Time (1,400-1,860 rpm)

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires