Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
-
-
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
-
Note (3)
Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.
-
-
Engine Power - ISO 14396:2002
-
752 hp
-
Emissions
-
Option 2 - Emits equivalent to U.S. EPA Tier 2
-
Net Power - SAE J1349:2011 - Standard Ambient
-
699 hp
-
Net Power - SAE J1349:2011 - High Ambient
-
648 hp
-
Peak Torque - 1,200 rpm
-
2624 lb/ft
-
Note
-
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
-
Transmission
Transmission Type
Cat planetary power shift
Cat planetary power shift
-
Forward - 1
5 mile/h
4.6 mile/h
-
Forward - 2
8 mile/h
8.2 mile/h
-
Reverse - 1
5 mile/h
5.1 mile/h
-
Reverse - 2
8 mile/h
9.1 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
Lock-up disabled
-
Direct Drive - Forward 2
8 mile/h
8.2 mile/h
-
Direct Drive - Forward 3
14 mile/h
14.5 mile/h
-
Direct Drive - Forward 4
24 mile/h
-
-
Direct Drive - Reverse 1
Lock-up disabled
5.1 mile/h
-
Direct Drive - Reverse 2
9 mile/h
9.1 mile/h
-
Direct Drive - Reverse 3
16 mile/h
16 mile/h
-
Direct Drive - Reverse 4
25.4 mile/h
-
-
Note
Travel speeds based on 35/65-R33 tires.
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
-
Forward - 3
-
14.5 mile/h
-
Reverse - 3
-
16 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH - Load Sense
Positive flow control
-
Lift/Tilt System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,165 rpm
159 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4598 psi
4786 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
190 mm x 1216 mm (7.5 in x 48 in)
235 mm × 1287 mm (9.3 in × 50.7 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
170 mm x 722 mm (6.7 in x 28.4 in)
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
Pilot System
Variable displacement piston
Open loop and pressure reducing
-
Relief Valve Setting
500 psi
-
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 1,800 rpm
-
240 gpm
-
Pilot Relief Setting
-
507 psi
-
Hydraulic Cycle Times
Rack Back
3.8 s
4.3 s
-
Raise
7.5 s
8.6 s
-
Dump
3 s
2.9 s
-
Lower Float Down
4.6 s
3.7 s
-
Total Hydraulic Cycle Time - Empty Bucket
18.9 s
13.8 s
-
Lower
-
3.7 s
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Pilot, load sensing
-
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
-
Maximum Flow at 2,165 rpm
52 gal/min
-
-
Relief Valve Setting - Steering
4000 psi
5004 psi
-
Total Steering Angle
70°
70°
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
5.2 s
-
-
Maximum Flow at 1,400 rpm
-
96.2 gpm
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
+/-12.5°
8.5°
-
Brakes
Brakes
ISO 3450:2011
ISO 3450: 2011
-
Operator's Cab
ROPS/FOPS
Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
116 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
*Sound suppression equipped
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Machine Sound Power Level (ISO 6395:2008)*
-
114 dB(A)
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
74 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Service Refill Capacities
Fuel Tank
141 gal (US)
281 gal (US)
-
Cooling System
27 gal (US)
54.9 gal (US)
-
Engine Crankcase
9 gal (US)
20 gal (US)
-
Diesel Exhaust Fluid Tank
5.5 gal (US)
-
-
Transmission
20 gal (US)
29.1 gal (US)
-
Differential - Final Drives - Front
49 gal (US)
71.6 gal (US)
-
Differential - Final Drives - Rear
45 gal (US)
68.9 gal (US)
-
Hydraulic System Factory Fill
94 gal (US)
210 gal (US)
-
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: - 20% biodiesel FAME (fatty acid methyl ester) *** - 10
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
-
Hydraulic Tank - Implement and Hydraulic Fan
-
68.9 gal (US)
-
Hydraulic Tank - Steering and Braking
-
34.9 gal (US)
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
13.5 ft
-
-
Ground to Top of Exhaust Stacks
13.3 ft
-
-
Ground to Top of Hood
10.7 ft
-
-
Ground to Fuel Tank Clearance
2.2 ft
-
-
Rear Axle - Centerline to Bumper
10.3 ft
-
-
Front Axle Centerline to Bucket Tip
16.7 ft
-
-
Wheel Base
12.5 ft
-
-
Maximum Overall Length
39.5 ft
-
-
Ground to Lower Hitch Clearance
1.5 ft
-
-
Ground to Center of Front Axle
3.2 ft
-
-
Clearance at Maximum Lift (45° Dump)
12 ft
-
-
B-Pin Height - Maximum Lift
18.7 ft
-
-
Maximum Overall Height - Bucket Raised
25 ft
-
-
Reach at Maximum Lift (45° Dump)
7.7 ft
-
-
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
-
-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
116 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)*
-
114 dB(A)
-
Note (1)
-
*Sound suppression equipped
-
Note (2)
-
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (3)
-
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (4)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
-
17.2 ft
-
Ground to Top of Exhaust Stacks
-
16.6 ft
-
Ground to Top of Hood
-
12.7 ft
-
Ground to Bumper Clearance
-
3.5 ft
-
Rear Axle - Centerline to Bumper
-
12.5 ft
-
Front Axle Centerline to Bucket Tip
-
15.4 ft
-
Wheel Base
-
15.1 ft
-
Maximum Overall Length
-
42.9 ft
-
Ground to Lower Hitch Clearance
-
2 ft
-
Ground to Center of Front Axle
-
4.2 ft
-
Clearance at Maximum Lift
-
7.2 ft
-
Rack Back Angle at Ground Level
-
40.4°
-
Rack Back Angle at Carry
-
48.8°
-
B-Pin Height - Maximum Lift
-
19.7 ft
-
Maximum Overall Height - Bucket Raised
-
27.2 ft
-
Rack Angle at Maximum Lift
-
63.7°
-
Dump Angle at Maximum Lift
-
45°
-
Reach - Maximum Lift
-
7.2 ft
-
Note
-
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
-
17.2 ft
-
Ground to Top of Exhaust Stacks
-
16.6 ft
-
Ground to Top of Hood
-
12.7 ft
-
Ground to Bumper Clearance
-
3.5 ft
-
Rear Axle - Centerline to Bumper
-
12.5 ft
-
Front Axle Centerline to Bucket Tip
-
17.8 ft
-
Wheel Base
-
15.1 ft
-
Maximum Overall Length
-
45.3 ft
-
Ground to Lower Hitch Clearance
-
2 ft
-
Ground to Center of Front Axle
-
4.2 ft
-
Clearance at Maximum Lift
-
14.8 ft
-
Rack Back Angle at Ground Level
-
39.9°
-
Rack Back Angle at Carry
-
49.3°
-
B-Pin Height - Maximum Lift
-
21.2 ft
-
Maximum Overall Height - Bucket Raised
-
28.7 ft
-
Rack Angle at Maximum Lift
-
60.6°
-
Dump Angle at Maximum Lift
-
51°
-
Reach - Maximum Lift
-
8.5 ft
-
Note
-
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
