Compare

Compare Equipment Go Back

Operating Specifications
	988 GC Wheel Loader View Product	992 Wheel Loader View Product Remove	903D Compact Wheel Loader View Product Remove	986 Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Operating Weight	112426 lb	233430 lb	-	-	116362 lb
Bucket Capacity Range	6.4-7.6 m3 (8.3-10 yd3)	11.5-24.5 m³ (15-32 yd³)	-	5.0-10.3 m³ (6.5-13.5 yd³)	4.7-13 m3 (6.2-17 yd3)
Rated Payload - Quarry Face	12.5 ton (US)	-	-	-	12.5 t
Cat Truck Match - High Lift	772/773/775	785	-	772/773	-
Rated Payload - Standard	-	25.5 ton (US)	-	-	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-	-	-
Rated Payload - High Lift	-	22.5 ton (US)	-	-	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-	-	-
Cat Truck Match - Standard	-	775/777	-	770/735/740/745	-
Operating Weight - Standard	-	-	-	97785 lb	-
Operating Weight - High Lift	-	-	-	104005 lb	-
Rated Payload - Standard (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (Standard)	-	-	-	14 ton (US)	-
Rated Payload - High Lift (Quarry Face)	-	-	-	11 ton (US)	-
Rated Payload - Loose Material (High Lift)	-	-	-	12.1 ton (US)	-
Rated Payload - Loose Material	-	-	-	-	16 t
Engine
Engine Model	Cat® C15	Cat® C32B	Cat C2.4*	Cat® C15	Cat® C18
Rated Speed	2000 rpm	1750 rpm	-	2000	1,700 rpm
Peak Power Speed	1600 rpm	-	-	1600	1,500 rpm
Gross Power - SAE J1995:2014	456 hp	-	-	456 hp	588 hp
Net Power - SAE J1349:2011	448 hp	-	-	373 hp	538 hp
Bore	5.4 in	5.7 in	3.4 in	5.4 in	5.7 in
Stroke	6.75 in	6.4 in	4 in	6.75 in	7.2 in
Displacement	927 in³	1963.5 in³	147 in²	927 in²	1105 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lbf·ft	-	-	1778 lb/ft	-
Torque Rise	16%	-	-	16%	58%
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	Two engine emissions options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Note (3)	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	-	-	-	-
Net Power	-	814 hp	-	-	-
Emissions	-	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 hp	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 hp	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 hp	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 hp	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-	-	-
Maximum Gross Power	-	-	42 hp	-	-
Gross Power	-	-	42 hp	-	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	-	40 hp	-	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	-	40 hp	-	-
Note	-	-	*Engine meets U.S. EPA Tier 4 Final emission standards.	-	-
Engine Power - ISO 14396:2002	-	-	-	449 hp	580 hp
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	-	373 hp	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	-	373 hp	-
Peak Torque - 1,200 rpm	-	-	-	-	2230 lbf·ft
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Powershift	-	Cat planetary power shift	Cat switched reluctance electric drive
Forward - 1	5 mile/h	4.3 mile/h	-	5 mile/h	-
Forward - 2	8 mile/h	7.4 mile/h	-	8 mile/h	-
Reverse - 1	5 mile/h	4.7 mile/h	-	5 mile/h	-
Reverse - 2	8 mile/h	8.1 mile/h	-	8 mile/h	-
Direct Drive - Forward 1	Lock-up disabled	Disabled	-	-	-
Direct Drive - Forward 2	8 mile/h	8 mile/h	-	8 mile/h	-
Direct Drive - Forward 3	14 mile/h	14 mile/h	-	14 mile/h	-
Direct Drive - Forward 4	24 mile/h	-	-	24 mile/h	-
Direct Drive - Reverse 1	Lock-up disabled	5 mile/h	-	-	-
Direct Drive - Reverse 2	9 mile/h	8.8 mile/h	-	9 mile/h	-
Direct Drive - Reverse 3	16 mile/h	15.3 mile/h	-	16 mile/h	-
Direct Drive - Reverse 4	25.4 mile/h	-	-	25.4 mile/h	-
Note	Travel speeds based on 35/65-R33 tires.	-	-	-	-
Forward - 3	-	12.7 mile/h	-	-	-
Reverse - 3	-	13.9 mile/h	-	-	-
Travel Speed	-	-	12.4 mile/h	-	-
Forward 1 (virtual)	-	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	-	17.5 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH - Load Sense	Positive Flow Control	-	Load Sense	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	-	2 × 110 cc variable displacement	Variable displacement piston
Maximum Flow at 2,165 rpm	159 gpm	250 gpm	-	123 gpm	-
Relief Valve Setting - Lift/Tilt	4598 psi	5000 psi	-	4050 psi	4757 psi
Cylinders, Double Acting - Lift, Bore and Stroke	190 mm x 1216 mm (7.5 in x 48 in)	-	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	170 mm x 722 mm (6.7 in x 28.4 in)	-	-	-	-
Pilot System	Variable displacement piston	-	-	-	-
Relief Valve Setting	500 psi	-	-	-	-
Lift Cylinder - Bore	-	9.3 in	-	7.5 in	8.7 in
Lift Cylinder - Stroke	-	63.5 in	-	45 in	41.3 in
Tilt Cylinder - Bore	-	11.5 in	-	6.7 in	8.7 in
Tilt Cylinder - Stroke	-	41.5 in	-	28.4 in	27 in
Maximum Flow at 1,400-1,600 rpm	-	-	-	-	153 gpm
Hydraulic Cycle Times
Rack Back	3.8 s	2.3 s	-	4.5 s	4.5 s
Raise	7.5 s	9 s	-	9 s	8 s
Dump	3 s	2.6 s	-	3.5 s	2.2 s
Lower Float Down	4.6 s	-	-	4.3 s	3.5 s
Total Hydraulic Cycle Time - Empty Bucket	18.9 s	-	-	-	-
Rack Back - High Lift	-	2.3 s	-	-	-
Raise - High Lift	-	9 s	-	-	-
Dump - High Lift	-	2.6 s	-	-	-
Float Down	-	3.2 s	-	-	-
Float Down - High Lift	-	3.2 s	-	-	-
Total Hydraulic Cycle Time	-	17.1 s	-	21.3 s	18.2 s
Lower	-	-	-	5.2 s	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	-	Load Sense	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-	Piston, variable displacement	Piston, variable displacement
Maximum Flow at 2,165 rpm	52 gpm	-	-	-	-
Relief Valve Setting - Steering	4000 psi	-	-	-	-
Total Steering Angle	70°	80°	-	70°	86°
Steering Cycle Times - High Idle	3 s	3.1 s	-	-	3.4 s
Steering Cycle Times - Low Idle	5.2 s	4.9 s	-	-	5.6 s
Maximum Flow at 1,400-1,850 rpm	-	70 gpm	-	-	-
Steering Cut Off Pressure	-	4500 psi	-	4000 psi	4351 psi
Maximum Flow at 1,400 rpm	-	-	-	52 gpm	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	-	71.3 gpm
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con
Axles
Front	Fixed	Fixed	-	Fixed	Fixed
Rear	Trunnion	Trunnion	-	Trunnion	Trunnion
Oscillation Angle	+/-12.5°	±9°	-	±12.5°	13°
Oscillation Angle - Chain Arrangement	-	-	-	±8.5°	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011
Operator's Cab
ROPS/FOPS	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	73 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	113 dB(A)	109 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	72 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)	109 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	-	74 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	113 dB(A)	110 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	-	73 dB(A)	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	110 dB(A)	110 dB(A)
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Service Refill Capacities
Fuel Tank	141 gal (US)	385.7 gal (US)	11.4 gal (US)	141 gal (US)	147 gal (US)
Cooling System	27 gal (US)	-	3 gal (US)	-	-
Engine Crankcase	9 gal (US)	-	-	-	16 gal (US)
Diesel Exhaust Fluid Tank	5.5 gal (US)	-	-	6 gal (US)	8.7 gal (US)
Transmission	20 gal (US)	51.5 gal (US)	-	20 gal (US)	16 gal (US)
Differential - Final Drives - Front	49 gal (US)	96.4 gal (US)	-	-	49 gal (US)
Differential - Final Drives - Rear	45 gal (US)	96.4 gal (US)	-	-	49 gal (US)
Hydraulic System Factory Fill	94 gal (US)	-	-	87 gal (US)	-
Note	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	-	-	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: • 20%
Cooling Systems	-	59.4 gal (US)	-	26 gal (US)	-
Crankcase	-	31.7 gal (US)	-	9 gal (US)	-
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-	-	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-	-	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-	-	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-	-	-
Hydraulic System	-	-	6.3 gal (US)	-	-
Engine Oil	-	-	2.4 gal (US)	-	-
Fuel Tank - Short Lift	-	-	-	127 gal (US)	-
Axle Oil - Differentials and Final Drives - Front	-	-	-	49 gal (US)	-
Axle Oil - Differentials and Final Drives - Rear	-	-	-	45 gal (US)	-
Hydraulic System - Tank Only	-	-	-	34 gal (US)	-
Cooling System - Jacket Water	-	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	-	8 gal (US)
Hydraulic System - Implement/Steering	-	-	-	-	126 gal (US)
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.5 ft	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-	14.8 ft
Ground to Top of Hood	10.7 ft	-	-	-	10.9 ft
Ground to Fuel Tank Clearance	2.2 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	16.7 ft	-	-	-	15.3 ft
Wheel Base	12.5 ft	-	6.42 ft	-	14.9 ft
Maximum Overall Length	39.5 ft	-	-	-	40.7 ft
Ground to Lower Hitch Clearance	1.5 ft	-	-	-	1.9 ft
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Clearance at Maximum Lift (45° Dump)	12 ft	-	-	-	-
B-Pin Height - Maximum Lift	18.7 ft	-	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	25 ft	-	-	-	25.8 ft
Reach at Maximum Lift (45° Dump)	7.7 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Cab Height	-	-	8.25 ft	-	-
Ground Clearance	-	-	10 in	-	-
Overall Length - With Bucket*	-	-	16.17 ft	-	-
Reach at Maximum Dump Height*	-	-	2.42 ft	-	-
Dig Depth	-	-	8 in	-	-
Maximum Dump Height*	-	-	8 ft	-	-
Load Over Height	-	-	9.67 ft	-	-
Hinge Pin at Maximum Height	-	-	10.58 ft	-	-
Departure Angle - Degrees	-	-	30°	-	-
Overall Length - With Forks	-	-	17.58 ft	-	-
Reach - Ground Level	-	-	3.25 ft	-	-
Maximum Reach	-	-	4.92 ft	-	-
Fork Depth Above Ground	-	-	2 in	-	-
Fork Height at Maximum Reach	-	-	4.67 ft	-	-
Maximum Fork Height	-	-	10.33 ft	-	-
Fork Reach at Maximum Height	-	-	2 ft	-	-
Turning Radius - Over Bucket*	-	-	13.42 ft	-	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-	-
Width - Over Bucket*	-	-	5.83 ft	-	-
Tire Gauge	-	-	4.33 ft	-	-
Machine Width**	-	-	5.58 ft	-	-
Articulation Angle	-	-	40°	-	-
Steering Angle	-	-	80°	-	-
Dump Angle at Maximum Height	-	-	40°	-	-
Note (1)	-	-	*Vary with bucket size.	-	-
Note (2)	-	-	**Vary with tire size.	-	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Ground to Bumper Clearance	-	-	-	-	3.1 ft
Ground to Center of Axles	-	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	-	13.3 ft
Reach - Maximum Lift	-	-	-	-	6.8 ft
Buckets
Bucket Capacities	-	11.5-24.5 m³ (15-32 yd³)	0.6-1.0 m3 (0.8-1.3 yd3)	-	-
Bucket Capacities - General Purpose	-	-	0.6 m3 (0.8 yd3)	-	-
Bucket Capacities - Light Material	-	-	1.0 m3 (1.3 yd3)	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-	-	-
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-	-
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	-	-	-
Ground to Top of ROPS	-	18.3 ft	-	-	-
Ground to Top of Hood	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	8.2 ft	-	-	-
Clearance at Maximum Lift	-	15.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	22.8 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	30.8 ft	-	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-	-
Tread Width	-	10.83 ft	-	-	-
Rack Back Angle - Maximum Lift	-	56.9 degrees	-	-	-
Dump Angle at Maximum Lift	-	-49.5 degrees	-	-	-
Rack Back Angle - Ground Level	-	40.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	14.74 ft	-	-	-
Rack Back Angle - Carry	-	48.9 degrees	-	-	-
Wheel Base	-	19.3 ft	-	-	-
Maximum Overall Length	-	50.8 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	18 ft	-	-	-
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	-	-	-
Rack Back Angle - Ground Level	-	42.5 degrees	-	-	-
Dump Angle at Maximum Lift	-	-48.1 degrees	-	-	-
Rack Back Angle - Maximum Lift	-	56.2 degrees	-	-	-
Width - Over Tires - With Bulge	-	14.75 ft	-	-	-
Rack Back Angle - Carry	-	51.6 degrees	-	-	-
Ground to Top of Exhaust Stacks	-	17 ft	-	-	-
Ground to Top of ROPS	-	18.3 ft	-	-	-
Ground to Top of Hood	-	13.1 ft	-	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-	-
Reach - Maximum Lift	-	7.6 ft	-	-	-
Clearance at Maximum Lift	-	17.2 ft	-	-	-
B-Pin Height - Maximum Lift	-	24.5 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	32 ft	-	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-	-
Wheel Base	-	19.3 ft	-	-	-
Maximum Overall Length	-	51.6 ft	-	-	-
Front Axle Centerline to Bucket Tip	-	18.8 ft	-	-	-
Weights
Operating Weight	-	-	9414 lb	-	-
Hydraulic System
Main Relief	-	-	3481 psi	-	-
3rd Auxiliary Flow	-	-	14 gpm	-	-
Hydraulic Cycle Time - Lower, Float	-	-	2.4 s	-	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	-	-	4.4 s	-	-
Hydraulic Cycle Time - Dump	-	-	0.7 s	-	-
Cab
ROPS	-	-	ISO 3471:2008	-	-
FOPS	-	-	ISO 3449:2005 Level I	-	-
Dimensions (Approximate) - Standard Lift
Cab Height	-	-	8.25 ft	-	-
Ground Clearance	-	-	10 in	-	-
Wheel Base	-	-	6.42 ft	-	14.9 ft
Overall Length - With Bucket*	-	-	15.75 ft	-	-
Reach at Maximum Dump Height*	-	-	2.33 ft	-	-
Dig Depth	-	-	6 in	-	-
Maximum Dump Height*	-	-	7.5 ft	-	-
Load Over Height	-	-	9.17 ft	-	-
Hinge Pin at Maximum Height	-	-	10.08 ft	-	-
Departure Angle - Degrees	-	-	30°	-	-
Overall Length - With Forks	-	-	17.08 ft	-	-
Reach - Ground Level	-	-	2.67 ft	-	-
Maximum Reach	-	-	4.5 ft	-	-
Fork Depth Above Ground	-	-	2 in	-	-
Fork Height at Maximum Reach	-	-	4.67 ft	-	-
Maximum Fork Height	-	-	9.83 ft	-	-
Fork Reach at Maximum Height	-	-	2 ft	-	-
Turning Radius - Over Bucket*	-	-	13.17 ft	-	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-	-
Width - Over Bucket*	-	-	5.83 ft	-	-
Tire Gauge	-	-	4.33 ft	-	-
Machine Width**	-	-	5.58 ft	-	-
Articulation Angle	-	-	40°	-	-
Steering Angle	-	-	80°	-	-
Dump Angle at Maximum Height	-	-	40°	-	-
Note (1)	-	-	*Vary with bucket size.	-	-
Note (2)	-	-	**Vary with tire size.	-	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-	-
Ground to Top of ROPS	-	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	-	14 ft
Maximum Overall Length	-	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	-	6.5 ft
Note	-	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Operating Specifications - Standard Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	-	-	0.8 yd³	-	-
Breakout Force	-	-	6160 lbf	-	-
Operating Weight	-	-	9414 lb	-	-
Rated Operating Load at Full Turn - Bucket***	-	-	2701 lb	-	-
Straight Tipping Load - Bucket***	-	-	6415 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5401 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5512 lb	-	-
Rack Back - Transport Position	-	-	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3366 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2524 lb	-	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Operating Specifications - High Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-	-
Rated Bucket Capacity	-	-	0.8 yd³	-	-
Breakout Force	-	-	6204 lbf	-	-
Operating Weight	-	-	9462 lb	-	-
Rated Operating Load at Full Turn - Bucket***	-	-	2502 lb	-	-
Straight Tipping Load - Bucket***	-	-	5975 lb	-	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5004 lb	-	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5115 lb	-	-
Rack Back - Transport Position	-	-	51°	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3148 lb	-	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2361 lb	-	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-	-
Maximum Material Densities - General Purpose
Bucket Type	-	-	General Purpose	-	-
Rated Capacity	-	-	0.8 yd³	-	-
Dump Height	-	-	90 in	-	-
Maximum Material Density	-	-	3169 lb/yd³	-	-
Bucket Width	-	-	70 in	-	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Maximum Material Densities - Light Material
Bucket Type	-	-	Light Material	-	-
Rated Capacity	-	-	1.3 yd³	-	-
Dump Height	-	-	85 in	-	-
Maximum Material Density	-	-	1989 lb/yd³	-	-
Bucket Width	-	-	74 in	-	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-	-
Sustainability
Recyclability	-	-	97%	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Front Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
Reach - Maximum Lift	-	-	-	7.1 ft	-
Clearance at Maximum Lift	-	-	-	10.1 ft	-
B-Pin Height - Maximum Lift	-	-	-	16.1 ft	-
Maximum Overall Height - Bucket Raised	-	-	-	22.4 ft	-
Rear Axle - Centerline to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	36.6 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	13.8 ft	-
Note	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Front Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
Reach - Maximum Lift	-	-	-	7.4 ft	-
Clearance at Maximum Lift	-	-	-	11.6 ft	-
B-Pin Height - Maximum Lift	-	-	-	17.6 ft	-
Maximum Overall Height - Bucket Raised	-	-	-	23.9 ft	-
Rear Axle - Centerline to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	38 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	15.3 ft	-
Note	-	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
Reach at Maximum Lift	-	-	-	8 ft	-
Clearance at Maximum Lift	-	-	-	10.7 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Maximum Overall Height, Bucket Raised	-	-	-	20.9 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.2 ft	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft	-
Ground to Top of Hood	-	-	-	10.7 ft	-
Ground to Center of Rear Axle	-	-	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	-	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	-	-	1.5 ft	-
B-Pin Height at Maximum Lift	-	-	-	15 ft	-
Rear Axle Center Line to Bumper	-	-	-	10.3 ft	-
Wheel Base	-	-	-	12.5 ft	-
Maximum Overall Length	-	-	-	35.4 ft	-
Front Axle Centerline to Bucket Tip	-	-	-	12.6 ft	-
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	-	16.5 ft
Wheel Base	-	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-	-39.4 °

Compare Equipment Go Back

988 GC Wheel Loader

992 Wheel Loader

903D Compact Wheel Loader

986 Wheel Loader

988 XE Wheel Loader

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Buckets

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Hydraulic System

Loader Hydraulic System

Cab

Dimensions (Approximate) - Standard Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Dimensions - Millyard Linkage