Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
-
-
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
-
Note (3)
Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.
-
-
Maximum Gross Power
-
110 hp
-
Rated Net Power - Rated Engine Speed
-
2200 r/min
-
Maximum Gross Power - Rated Engine Speed
-
1800 r/min
-
Rated Net Power - SAE J1349
-
99 hp
-
Maximum Gross Power - ISO 14396 (metric)
-
112 hp
-
Rated Net Power - ISO 9249
-
98 hp
-
Maximum Gross Torque - SAE J1995
-
335 ft·lbf
-
Maximum Gross Torque - ISO 14396
-
332 ft·lbf
-
Maximum Net Torque - SAE J1349
-
329 ft·lbf
-
Maximum Net Torque - ISO 9249
-
327 ft·lbf
-
Emissions
-
Engine meets Tier 4 Final/Stage V emission standards.
-
Note
-
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Maximum Gross Power - ISO 14396
-
110 hp
-
Transmission
Transmission Type
Cat planetary power shift
-
-
Forward - 1
5 mile/h
-
-
Forward - 2
8 mile/h
-
-
Reverse - 1
5 mile/h
-
-
Reverse - 2
8 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8 mile/h
-
-
Direct Drive - Forward 3
14 mile/h
-
-
Direct Drive - Forward 4
24 mile/h
-
-
Direct Drive - Reverse 1
Lock-up disabled
-
-
Direct Drive - Reverse 2
9 mile/h
-
-
Direct Drive - Reverse 3
16 mile/h
-
-
Direct Drive - Reverse 4
25.4 mile/h
-
-
Note
Travel speeds based on 35/65-R33 tires.
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
-
Forward and Reverse - Speed Range 3
-
25 mile/h
-
Forward and Reverse - Speed Range 2*
-
12.5 mile/h
-
Forward and Reverse - Speed Range 1*
-
6.3 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH - Load Sense
-
-
Lift/Tilt System - Pump
Variable displacement piston
-
-
Maximum Flow at 2,165 rpm
159 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4598 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
190 mm x 1216 mm (7.5 in x 48 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
170 mm x 722 mm (6.7 in x 28.4 in)
-
-
Pilot System
Variable displacement piston
-
-
Relief Valve Setting
500 psi
-
-
Hydraulic Cycle Times
Rack Back
3.8 s
-
-
Raise
7.5 s
-
-
Dump
3 s
-
-
Lower Float Down
4.6 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
18.9 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow at 2,165 rpm
52 gal/min
-
-
Relief Valve Setting - Steering
4000 psi
-
-
Total Steering Angle
70°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
5.2 s
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
74 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
73 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
-
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
-
-
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
-
-
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
-
-
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Service Refill Capacities
Fuel Tank
141 gal (US)
43.6 gal (US)
-
Cooling System
27 gal (US)
5.7 gal (US)
-
Engine Crankcase
9 gal (US)
2.6 gal (US)
-
Diesel Exhaust Fluid Tank
5.5 gal (US)
-
-
Transmission
20 gal (US)
0.8 gal (US)
-
Differential - Final Drives - Front
49 gal (US)
-
-
Differential - Final Drives - Rear
45 gal (US)
-
-
Hydraulic System Factory Fill
94 gal (US)
-
-
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: - 20% biodiesel FAME (fatty acid methyl ester) *** - 10
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
Diesel Exhaust Fluid (DEF) Tank
-
4.8 gal (US)
-
Hydraulic System - Including Tank
-
25.9 gal (US)
-
Hydraulic Tank
-
14.5 gal (US)
-
Axles - Front Center Differential
-
2 gal (US)
-
Axles - Rear Center Differential
-
2 gal (US)
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
13.5 ft
-
-
Ground to Top of Exhaust Stacks
13.3 ft
-
-
Ground to Top of Hood
10.7 ft
-
-
Ground to Fuel Tank Clearance
2.2 ft
-
-
Rear Axle - Centerline to Bumper
10.3 ft
-
-
Front Axle Centerline to Bucket Tip
16.7 ft
-
-
Wheel Base
12.5 ft
-
-
Maximum Overall Length
39.5 ft
-
-
Ground to Lower Hitch Clearance
1.5 ft
-
-
Ground to Center of Front Axle
3.2 ft
-
-
Clearance at Maximum Lift (45° Dump)
12 ft
-
-
B-Pin Height - Maximum Lift
18.7 ft
-
-
Maximum Overall Height - Bucket Raised
25 ft
-
-
Reach at Maximum Lift (45° Dump)
7.7 ft
-
-
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
-
-
Weights
Operating Weight
-
18102 lb
-
Buckets
Bucket Capacities
-
1.3-3.5 m3 (1.7-4.6 yd3)
-
Bucket Capacities - General Purpose
-
1.3-1.9 m³ (1.7-2.5 yd³)
-
Bucket Capacities - Light Material
-
2.5-3.5 m³ (3.3-4.6 yd³)
-
Sustainability
Recyclability
-
95%
-
Cab
ROPS
-
ISO 3471:2008
-
FOPS
-
ISO 3449:2005
-
Note (2)
-
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
Note (3)
-
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
Note (1)
-
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
Note (4)
-
*The measurements were conducted with the cab doors and windows closed.
-
Steering
Maximum Working Pressure - Steering Pump
-
2683 psi
-
Steering Articulation Angle - Each Direction
-
40 °
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
-
3.2 s
-
Maximum Flow - Steering Pump
-
17 gpm
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
-
3.75 turns
-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
-
1.4 s
-
Hydraulic Cycle Time - Total Cycle Time
-
12.5 s
-
Maximum Working Pressure - Implement Pump
-
3408 psi
-
Relief Pressure - Tilt Cylinder
-
4931 psi
-
Hydraulic Cycle Time - Rackback
-
2.2 s
-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
-
3046 psi
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
-
5.2 s
-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
-
3046 psi
-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
-
24 gpm
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
-
24 gpm
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
-
3.7 s
-
Maximum Flow - Implement Pump
-
32 gpm
-
Tires
Note (2)
-
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
