Compare

Compare Equipment Go Back

Operating Specifications
	988 GC Wheel Loader View Product	995 Wheel Loader View Product Remove	992 Wheel Loader View Product Remove	950 GC Wheel Loader \| Front Loader View Product Remove	914 Compact Wheel Loader View Product Remove
Operating Weight	112426 lb	-	233430 lb	-	-
Bucket Capacity Range	6.4-7.6 m3 (8.3-10 yd3)	17.2-43.6 m3 (22.3-57 yd3)	11.5-24.5 m³ (15-32 yd³)	-	-
Rated Payload - Quarry Face	12.5 ton (US)	-	-	-	-
Cat Truck Match - High Lift	772/773/775	789/793/794	785	-	-
Operating Weight - Standard	-	543772 lb	-	-	-
Operating Weight - High Lift	-	547675 lb	-	-	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-	-
Cat Truck Match - Standard	-	785/789	775/777	-	-
Rated Payload - Standard	-	-	25.5 ton (US)	-	-
Rated Payload - Standard (Material Handler)	-	-	30 ton (US)	-	-
Rated Payload - High Lift	-	-	22.5 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	-	-	27 ton (US)	-	-
Engine
Engine Model	Cat® C15	Cat® 3516E	Cat® C32B	Cat C7.1	Cat C3.6
Rated Speed	2000 rpm	-	1750 rpm	-	-
Peak Power Speed	1600 rpm	-	-	-	-
Gross Power - SAE J1995:2014	456 hp	1870 hp	-	-	-
Net Power - SAE J1349:2011	448 hp	-	-	-	-
Bore	5.4 in	6.7 in	5.7 in	4.13 in	3.85 in
Stroke	6.75 in	8.5 in	6.4 in	5.31 in	4.72 in
Displacement	927 in³	4766 in³	1963.5 in³	428 in³	220 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lbf·ft	-	-	-	-
Torque Rise	16%	39%	-	-	-
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	The power ratings apply when tested under the reference conditions for the specified standard.	-	-	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	-	-
Note (3)	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	The gross power advertised is with the fan at maximum speed.	-	-	-
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	Tier 4/Stage V	Engine meets Tier 4 Final/Stage V emission standards.
Engine Power - ISO 14396	-	1847 hp	-	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-	-	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-	-
Net Power	-	-	814 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	900 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	937 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	907 hp	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	944 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	884 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	921 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	893 hp	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	931 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	814 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	823 hp	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	823 hp	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	3514 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	3555 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	3537 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	3570 ft·lbf	-	-
Net Power - ISO 9249	-	-	-	225 hp	-
Note	-	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	-	-	-	228 hp	-
Maximum Power - 1,700 rpm - ISO 14396	-	-	-	240 hp	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	-	-	-	243 hp	-
Peak Gross Torque - 1,400 rpm - SAE J1995	-	-	-	811 ft·lbf	-
Peak Gross Torque - 1,400 rpm - ISO 14396	-	-	-	805 ft·lbf	-
Maximum Net Power - 1,700 rpm - ISO 9249	-	-	-	225 hp	-
Maximum Net Power - 1,700 rpm - SAE J1349	-	-	-	225 hp	-
Maximum Power - 1,700 rpm - SAE J1995	-	-	-	241 hp	-
Maximum Gross Power	-	-	-	-	110 hp
Rated Net Power - Rated Engine Speed	-	-	-	-	2200 r/min
Maximum Gross Power - Rated Engine Speed	-	-	-	-	1800 r/min
Rated Net Power - SAE J1349	-	-	-	-	99 hp
Maximum Gross Power - ISO 14396 (metric)	-	-	-	-	112 hp
Rated Net Power - ISO 9249	-	-	-	-	98 hp
Maximum Gross Torque - SAE J1995	-	-	-	-	335 ft·lbf
Maximum Gross Torque - ISO 14396	-	-	-	-	332 ft·lbf
Maximum Net Torque - SAE J1349	-	-	-	-	329 ft·lbf
Maximum Net Torque - ISO 9249	-	-	-	-	327 ft·lbf
Maximum Gross Power - ISO 14396	-	-	-	-	110 hp
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Power Shift	Cat Planetary Powershift	-	-
Forward - 1	5 mile/h	4.6 mile/h	4.3 mile/h	4.5 mile/h	-
Forward - 2	8 mile/h	8 mile/h	7.4 mile/h	8 mile/h	-
Reverse - 1	5 mile/h	5 mile/h	4.7 mile/h	4.5 mile/h	-
Reverse - 2	8 mile/h	8.8 mile/h	8.1 mile/h	8 mile/h	-
Direct Drive - Forward 1	Lock-up disabled	Lock-up disables	Disabled	-	-
Direct Drive - Forward 2	8 mile/h	8.7 mile/h	8 mile/h	-	-
Direct Drive - Forward 3	14 mile/h	15.2 mile/h	14 mile/h	-	-
Direct Drive - Forward 4	24 mile/h	-	-	-	-
Direct Drive - Reverse 1	Lock-up disabled	Lock-up disables	5 mile/h	-	-
Direct Drive - Reverse 2	9 mile/h	9.6 mile/h	8.8 mile/h	-	-
Direct Drive - Reverse 3	16 mile/h	16.8 mile/h	15.3 mile/h	-	-
Direct Drive - Reverse 4	25.4 mile/h	-	-	-	-
Note	Travel speeds based on 35/65-R33 tires.	Travel speeds based on 58/85-57 tires.	-	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward - 3	-	13.6 mile/h	12.7 mile/h	14.2 mile/h	-
Reverse - 3	-	14.9 mile/h	13.9 mile/h	14.2 mile/h	-
Forward - 4	-	-	-	22.4 mile/h	-
Forward and Reverse - Speed Range 3	-	-	-	-	25 mile/h
Forward and Reverse - Speed Range 1*	-	-	-	-	6.3 mile/h
Forward and Reverse - Speed Range 2*	-	-	-	-	12.5 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH - Load Sense	Positive Flow Control	Positive Flow Control	-	-
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	Variable Displacement Piston	-	-
Maximum Flow at 2,165 rpm	159 gpm	-	250 gpm	-	-
Relief Valve Setting - Lift/Tilt	4598 psi	5004 psi	5000 psi	-	-
Cylinders, Double Acting - Lift, Bore and Stroke	190 mm x 1216 mm (7.5 in x 48 in)	370 × 1713 mm (14.6 × 67.4 in)	-	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	170 mm x 722 mm (6.7 in x 28.4 in)	310 × 1086 mm (12.2 × 42.8 in)	-	-	-
Pilot System	Variable displacement piston	Open Loop and Pressure Reducing	-	-	-
Relief Valve Setting	500 psi	-	-	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-	-	-
Lift Cylinder - Bore	-	-	9.3 in	-	-
Lift Cylinder - Stroke	-	-	63.5 in	-	-
Tilt Cylinder - Bore	-	-	11.5 in	-	-
Tilt Cylinder - Stroke	-	-	41.5 in	-	-
Hydraulic Cycle Times
Rack Back	3.8 s	4.9 s	2.3 s	-	-
Raise	7.5 s	12.6 s	9 s	-	-
Dump	3 s	3.1 s	2.6 s	-	-
Lower Float Down	4.6 s	4.2 s	-	-	-
Total Hydraulic Cycle Time - Empty Bucket	18.9 s	-	-	-	-
Rack Back - High Lift	-	-	2.3 s	-	-
Raise - High Lift	-	-	9 s	-	-
Dump - High Lift	-	-	2.6 s	-	-
Float Down	-	-	3.2 s	-	-
Float Down - High Lift	-	-	3.2 s	-	-
Total Hydraulic Cycle Time	-	-	17.1 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	Pilot, Load Sensing	-	-
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	Piston, Variable Displacement	-	-
Maximum Flow at 2,165 rpm	52 gpm	-	-	-	-
Relief Valve Setting - Steering	4000 psi	-	-	-	-
Total Steering Angle	70°	80 degrees	80°	-	-
Steering Cycle Times - High Idle	3 s	4.3 s	3.1 s	-	-
Steering Cycle Times - Low Idle	5.2 s	7.6 s	4.9 s	-	-
Maximum Flow at 1,400-1,850 rpm	-	-	70 gpm	-	-
Steering Cut Off Pressure	-	-	4500 psi	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	-	-	-
Axles
Front	Fixed	Fixed	Fixed	-	Fixed; Locking differential (standard)
Rear	Trunnion	Trunnion	Trunnion	-	Oscillating ±11 degrees; Locking differential (Standard)
Oscillation Angle	+/-12.5°	9°	±9°	-	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	ISO 3450:2011	-	-
Operator's Cab
ROPS/FOPS	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	-	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	-	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	-	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-	-
Service Refill Capacities
Fuel Tank	141 gal (US)	-	385.7 gal (US)	-	43.6 gal (US)
Cooling System	27 gal (US)	-	-	13.2 gal (US)	5.7 gal (US)
Engine Crankcase	9 gal (US)	-	-	-	2.6 gal (US)
Diesel Exhaust Fluid Tank	5.5 gal (US)	-	-	-	-
Transmission	20 gal (US)	-	51.5 gal (US)	11.9 gal (US)	0.8 gal (US)
Differential - Final Drives - Front	49 gal (US)	-	96.4 gal (US)	10.6 gal (US)	-
Differential - Final Drives - Rear	45 gal (US)	-	96.4 gal (US)	10 gal (US)	-
Hydraulic System Factory Fill	94 gal (US)	-	-	-	-
Note	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	-	-	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Cooling Systems	-	-	59.4 gal (US)	-	-
Crankcase	-	-	31.7 gal (US)	4.8 gal (US)	-
Hydraulic System Factory Fill (Implement)	-	-	104.1 gal (US)	-	-
Hydraulic Tank - Implement	-	-	60.2 gal (US)	-	-
Hydraulic Factory Fill (Steering)	-	-	32.5 gal (US)	-	-
Hydraulic Tank (Steering Tank Only)	-	-	26.3 gal (US)	-	-
DEF Tank	-	-	-	4.2 gal (US)	-
Fuel Tank Size	-	-	-	76.6 gal (US)	-
Hydraulic Tank	-	-	-	29.6 gal (US)	14.5 gal (US)
Axles - Rear Center Differential	-	-	-	-	2 gal (US)
Hydraulic System - Including Tank	-	-	-	-	25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	-	-	4.8 gal (US)
Axles - Front Center Differential	-	-	-	-	2 gal (US)
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.5 ft	-	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-	-
Ground to Fuel Tank Clearance	2.2 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	16.7 ft	-	-	-	-
Wheel Base	12.5 ft	-	-	-	-
Maximum Overall Length	39.5 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Clearance at Maximum Lift (45° Dump)	12 ft	-	-	-	-
B-Pin Height - Maximum Lift	18.7 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25 ft	-	-	-	-
Reach at Maximum Lift (45° Dump)	7.7 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	-	-	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-	-
Cooling System	-	138 gal (US)	-	-	-
Engine Crankcase	-	76 gal (US)	-	-	-
Transmission	-	110 gal (US)	-	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	109.4 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	131 °F	-	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	22.8 ft	-	-
Clearance at Maximum Lift	-	19.8 ft	15.2 ft	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-49.5 degrees	-	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	18 ft	-	-
Ground to Bumper Clearance	-	4.4 ft	3.8 ft	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	2.2 ft	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	17 ft	-	-
Ground to Top of Hood	-	18.6 ft	13.1 ft	-	-
Ground to Top of ROPS	-	23.4 ft	18.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	30.8 ft	-	-
Maximum Overall Length	-	64.6 ft	50.8 ft	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-	-
Rack Back Angle - Carry	-	47.7 degrees	48.9 degrees	-	-
Rack Back Angle - Ground Level	-	39.7 degrees	40.2 degrees	-	-
Reach - Maximum Lift	-	9.6 ft	8.2 ft	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	13.5 ft	-	-
Tread Width	-	14.1 ft	10.83 ft	-	-
Wheel Base	-	22.3 ft	19.3 ft	-	-
Width - Over Tires - With Bulge	-	18.8 ft	14.74 ft	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-
Rack Back Angle - Maximum Lift	-	-	56.9 degrees	-	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	24.5 ft	-	-
Clearance at Maximum Lift	-	22.6 ft	17.2 ft	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-48.1 degrees	-	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	18.8 ft	-	-
Ground to Bumper Clearance	-	4.4 ft	3.8 ft	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	2.2 ft	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	17 ft	-	-
Ground to Top of Hood	-	18.6 ft	13.1 ft	-	-
Ground to Top of ROPS	-	23.4 ft	18.3 ft	-	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	32 ft	-	-
Maximum Overall Length	-	66.9 ft	51.6 ft	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-	-
Rack Back Angle - Carry	-	53.5 degrees	51.6 degrees	-	-
Rack Back Angle - Ground Level	-	45 degrees	42.5 degrees	-	-
Reach - Maximum Lift	-	9.4 ft	7.6 ft	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	13.5 ft	-	-
Tread Width	-	14.1 ft	10.83 ft	-	-
Wheel Base	-	22.3 ft	19.3 ft	-	-
Width - Over Tires - With Bulge	-	18.8 ft	14.75 ft	-	-
Rack Back Angle - Maximum Lift	-	-	56.2 degrees	-	-
Ground to Center of Front Axle	-	-	4.3 ft	-	-
Buckets
Bucket Capacities	-	-	11.5-24.5 m³ (15-32 yd³)	2.9-4.4 m³ (3.75-5.75 yd³)	1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose	-	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material	-	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)
Weights
Operating Weight	-	-	-	41554 lb	19103 lb
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	-	-	-	76 dB(A)*	-
Note (1)	-	-	-	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	-	-	-	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	-	-	-	73 dB(A)	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	-	-	-	For machines in European Union countries and in countries that adopt the EU Directives	-
With Cooling Fan Speed at Maximum Value - Note	-	-	-	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	-	-	-	107 LWA***	-
Note (3)	-	-	-	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-
Note (2)	-	-	-	**For machines in European Union countries and in countries that adopt the "EU Directives."	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	73 dB(A)	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	-	-	-	109 dB(A)	-
Dimensions
Rack Back - Ground	-	-	-	40 degrees	-
Height - Top of Exhaust Pipe	-	-	-	11.17 ft	-
Centerline of Rear Axle to Hitch	-	-	-	5.42 ft	-
Lift Arm Clearance	-	-	-	12 ft	-
B-Pin Height	-	-	-	13.75 ft	-
Centerline of Rear Axle to Edge of Counterweight	-	-	-	6.75 ft	-
Ground Clearance	-	-	-	1.5 ft	-
Rack Back - Maximum Lift	-	-	-	60 degrees	-
Height - Top of Hood	-	-	-	8.75 ft	-
Wheel Base	-	-	-	10.83 ft	-
Height - Top of ROPS	-	-	-	11.33 ft	-
Rack Back - Carry	-	-	-	45 degrees	-
Note	-	-	-	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-
Weights and Operating Specifications
Note (2)	-	-	-	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-
Tipping Load - Full Turn - Rigid Tires**	-	-	-	25875 lb	-
Breakout Force	-	-	-	34638 lbf	-
Tipping Load - Full Turn - ISO 14397-1*	-	-	-	24264 lb	-
Note (3)	-	-	-	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-
Operating Weight	-	-	-	41554 lb	-
Note (1)	-	-	-	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	-	-	-	9.4 s	-
Steering System - Pump Type	-	-	-	Piston	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	-	-	-	4047 psi	-
Implement System - Maximum Pump Output at 2,390 rpm	-	-	-	68 gpm	-
Engine - Tier 4 Final/Stage IV
Emissions	-	-	-	Tier 4/Stage IV	-
Sustainability
Recyclability	-	-	-	-	95%
Cab
ROPS	-	-	-	-	ISO 3471:2008
FOPS	-	-	-	-	ISO 3449:2005
Note (4)	-	-	-	-	*The measurements were conducted with the cab doors and windows closed.
Note (2)	-	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)	-	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)	-	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Steering
Maximum Flow - Steering Pump	-	-	-	-	22 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	-	3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	-	2.8 s
Maximum Working Pressure - Steering Pump	-	-	-	-	3263 psi
Steering Articulation Angle - Each Direction	-	-	-	-	40 °
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	-	-	3046 psi
Maximum Flow - Implement Pump	-	-	-	-	39 gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	-	24 gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	-	-	3046 psi
Hydraulic Cycle Time - Total Cycle Time	-	-	-	-	12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	-	5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	-	-	24 gpm
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	-	1.4 s
Relief Pressure - Tilt Cylinder	-	-	-	-	4931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	-	32 gpm
Maximum Working Pressure - Implement Pump	-	-	-	-	4061 psi
Hydraulic Cycle Time - Rackback	-	-	-	-	2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	-	3.7 s
Tires
Other Choices Include	-	-	-	-	17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)	-	-	-	-	Other tire choices are available. Contact your Cat dealer for details.
Standard Size	-	-	-	-	17.5 R25 L2 XTLA
Note (3)	-	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)	-	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Compare Equipment Go Back

988 GC Wheel Loader

995 Wheel Loader

992 Wheel Loader

950 GC Wheel Loader | Front Loader

914 Compact Wheel Loader

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Buckets

Weights

Sound

Dimensions

Weights and Operating Specifications

Hydraulic System

Engine - Tier 4 Final/Stage IV

Sustainability

Cab

Steering

Loader Hydraulic System

Tires