Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control
Positive flow control
-
Lift/Tilt System - Pump
Variable Displacement Piston
-
-
Maximum Flow at 2,165 rpm
250 gal/min
-
-
Relief Valve Setting - Lift/Tilt
5000 psi
4786 psi
-
Lift Cylinder - Bore
9.3 in
-
-
Lift Cylinder - Stroke
63.5 in
-
-
Tilt Cylinder - Bore
11.5 in
-
-
Tilt Cylinder - Stroke
41.5 in
-
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 1,800 rpm (1)
-
240 gal/min
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
235 mm × 1287 mm (9.3 in × 50.7 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
-
292.1 mm × 820 mm (11.5 in × 32.3 in)
-
Pilot System
-
Open loop and pressure reducing
-
Relief Valve Setting - Main
-
507 psi
-
Hydraulic Cycle Times
Rack Back
2.3 s
4.3 s
-
Rack Back - High Lift
2.3 s
-
-
Raise
9 s
8.2 s
-
Raise - High Lift
9 s
-
-
Dump
2.6 s
2.9 s
-
Dump - High Lift
2.6 s
-
-
Float Down
3.2 s
-
-
Float Down - High Lift
3.2 s
-
-
Total Hydraulic Cycle Time
17.1 s
-
-
Lower
-
3.7 s
-
Lower Float Down
-
3.6 s
-
Total Hydraulic Cycle Time - Empty Bucket
-
13.8 s
-
Service Refill Capacities
Fuel Tank
385.7 gal (US)
294.3 gal (US)
-
Cooling Systems
59.4 gal (US)
-
-
Crankcase
31.7 gal (US)
-
-
Transmission
51.5 gal (US)
29.1 gal (US)
-
Differential - Final Drives - Front
96.4 gal (US)
71.6 gal (US)
-
Differential - Final Drives - Rear
96.4 gal (US)
68.9 gal (US)
-
Hydraulic System Factory Fill (Implement)
104.1 gal (US)
-
-
Hydraulic Tank - Implement
60.2 gal (US)
-
-
Hydraulic Factory Fill (Steering)
32.5 gal (US)
-
-
Hydraulic Tank (Steering Tank Only)
26.3 gal (US)
-
-
Cooling System
-
54.9 gal (US)
-
Engine Crankcase
-
20 gal (US)
-
Hydraulic System Factory Fill
-
210 gal (US)
-
Hydraulic Tank - Implement and Hydraulic Fan
-
68.9 gal (US)
-
Hydraulic Tank - Steering and Braking
-
34.9 gal (US)
-
Note
-
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
±9°
8.5°
-
Brakes
Brakes
ISO 3450:2011
ISO 3450: 2011
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
Pilot, load sensing
-
Steering System - Pump
Piston, Variable Displacement
Piston, variable displacement
-
Maximum Flow at 1,400-1,850 rpm
70 gal/min
-
-
Steering Cut Off Pressure
4500 psi
-
-
Total Steering Angle
80°
70°
-
Steering Cycle Times - Low Idle
4.9 s
-
-
Steering Cycle Times - High Idle
3.1 s
-
-
Maximum Flow at 1,400 rpm
-
96.2 gal/min
-
Relief Valve Setting - Steering
-
5004 psi
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
109.4 °F
-
-
Ambient Capability, Hydraulically Driven Demand Fan - High
131 °F
-
-
Sound Performance - Standard
Note
Machine Sound Level (ISO 6396:2008) - 116 dB(A)
-
-
Operator Sound Level (ISO 6396:2008)
-
65.5 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
115 dB(A)
-
Sound Performance - Suppression
Note
Machine Sound Level (ISO 6396:2008) - 113 dB(A)
-
-
Operator Sound Level (ISO 6396:2008)
-
65.5 dB(A)
-
Machine Sound Level (ISO 6395:2008)
-
113 dB(A)
-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks
17 ft
-
-
Ground to Top of ROPS
18.3 ft
-
-
Ground to Top of Hood
13.1 ft
-
-
Ground to Center of Front Axle
4.3 ft
-
-
Ground to Bumper Clearance
3.8 ft
-
-
Ground to Lower Hitch Clearance
2.2 ft
-
-
Reach - Maximum Lift
8.2 ft
-
-
Clearance at Maximum Lift
15.2 ft
-
-
B-Pin Height - Maximum Lift
22.8 ft
-
-
Maximum Overall Height - Bucket Raised
30.8 ft
-
-
Rear Axle - Centerline to Bumper
13.5 ft
-
-
Tread Width
10.83 ft
-
-
Rack Back Angle - Maximum Lift
56.9 degrees
-
-
Dump Angle at Maximum Lift
-49.5 degrees
-
-
Rack Back Angle - Ground Level
40.2 degrees
-
-
Width - Over Tires - With Bulge
14.74 ft
-
-
Rack Back Angle - Carry
48.9 degrees
-
-
Wheel Base
19.3 ft
-
-
Maximum Overall Length
50.8 ft
-
-
Front Axle Centerline to Bucket Tip
18 ft
-
-
Dimensions - High Lift - Approximate
Tread Width
10.83 ft
-
-
Rack Back Angle - Ground Level
42.5 degrees
-
-
Dump Angle at Maximum Lift
-48.1 degrees
-
-
Rack Back Angle - Maximum Lift
56.2 degrees
-
-
Width - Over Tires - With Bulge
14.75 ft
-
-
Rack Back Angle - Carry
51.6 degrees
-
-
Ground to Top of Exhaust Stacks
17 ft
-
-
Ground to Top of ROPS
18.3 ft
-
-
Ground to Top of Hood
13.1 ft
-
-
Ground to Center of Front Axle
4.3 ft
-
-
Ground to Bumper Clearance
3.8 ft
-
-
Ground to Lower Hitch Clearance
2.2 ft
-
-
Reach - Maximum Lift
7.6 ft
-
-
Clearance at Maximum Lift
17.2 ft
-
-
B-Pin Height - Maximum Lift
24.5 ft
-
-
Maximum Overall Height - Bucket Raised
32 ft
-
-
Rear Axle - Centerline to Bumper
13.5 ft
-
-
Wheel Base
19.3 ft
-
-
Maximum Overall Length
51.6 ft
-
-
Front Axle Centerline to Bucket Tip
18.8 ft
-
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).