Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
404 HP
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1636 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1620 lb/ft
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1515 lb/ft
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
432 HP
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
436 HP
-
Operating Specifications
Operating Weight
233430 lb
-
-
Rated Payload - Standard
25.5 ton (US)
-
-
Rated Payload - Standard (Material Handler)
30 ton (US)
-
-
Rated Payload - High Lift
22.5 ton (US)
-
-
Rated Payload - High Lift (Material Handler)
27 ton (US)
-
-
Bucket Capacity Range
11.5-24.5 m³ (15-32 yd³)
-
-
Cat Truck Match - Standard
775/777
-
-
Cat Truck Match - High Lift
785
-
-
Breakout Force
-
59060 lbf
-
Note (1)
-
For a machine configuration as defined under �Weight.�
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
-
46526 lb
-
Buckets
Bucket Capacities
11.5-24.5 m³ (15-32 yd³)
-
-
Transmission
Transmission Type
Cat Planetary Powershift
-
-
Forward - 1
4.3 mile/h
3.9 mile/h
-
Forward - 2
7.4 mile/h
7.4 mile/h
-
Forward - 3
12.7 mile/h
13.1 mile/h
-
Direct Drive - Forward 1
Disabled
-
-
Direct Drive - Forward 2
8 mile/h
-
-
Direct Drive - Forward 3
14 mile/h
-
-
Reverse - 1
4.7 mile/h
4.3 mile/h
-
Reverse - 2
8.1 mile/h
8.5 mile/h
-
Reverse - 3
13.9 mile/h
15 mile/h
-
Direct Drive - Reverse 1
5 mile/h
-
-
Direct Drive - Reverse 2
8.8 mile/h
-
-
Direct Drive - Reverse 3
15.3 mile/h
-
-
Forward - 4
-
23.3 mile/h
-
Note
-
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
Reverse - 4
-
24.5 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control
-
-
Lift/Tilt System - Pump
Variable Displacement Piston
-
-
Maximum Flow at 2,165 rpm
250 gal/min
-
-
Relief Valve Setting - Lift/Tilt
5000 psi
-
-
Lift Cylinder - Bore
9.3 in
-
-
Lift Cylinder - Stroke
63.5 in
-
-
Tilt Cylinder - Bore
11.5 in
-
-
Tilt Cylinder - Stroke
41.5 in
-
-
Hydraulic Cycle Times
Rack Back
2.3 s
-
-
Rack Back - High Lift
2.3 s
-
-
Raise
9 s
-
-
Raise - High Lift
9 s
-
-
Dump
2.6 s
-
-
Dump - High Lift
2.6 s
-
-
Float Down
3.2 s
-
-
Float Down - High Lift
3.2 s
-
-
Total Hydraulic Cycle Time
17.1 s
-
-
Service Refill Capacities
Fuel Tank
385.7 gal (US)
112.5 gal (US)
-
Cooling Systems
59.4 gal (US)
-
-
Crankcase
31.7 gal (US)
9.8 gal (US)
-
Transmission
51.5 gal (US)
20.3 gal (US)
-
Differential - Final Drives - Front
96.4 gal (US)
24.3 gal (US)
-
Differential - Final Drives - Rear
96.4 gal (US)
24.3 gal (US)
-
Hydraulic System Factory Fill (Implement)
104.1 gal (US)
-
-
Hydraulic Tank - Implement
60.2 gal (US)
-
-
Hydraulic Factory Fill (Steering)
32.5 gal (US)
-
-
Hydraulic Tank (Steering Tank Only)
26.3 gal (US)
-
-
Cooling System
-
13.7 gal (US)
-
DEF Tank
-
5.5 gal (US)
-
Hydraulic Tank
-
40.4 gal (US)
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Oscillation Angle
±9°
-
-
Brakes
Brakes
ISO 3450:2011
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
-
-
Steering System - Pump
Piston, Variable Displacement
-
-
Maximum Flow at 1,400-1,850 rpm
70 gal/min
-
-
Steering Cut Off Pressure
4500 psi
-
-
Total Steering Angle
80°
-
-
Steering Cycle Times - Low Idle
4.9 s
-
-
Steering Cycle Times - High Idle
3.1 s
-
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
109.4 °F
-
-
Ambient Capability, Hydraulically Driven Demand Fan - High
131 °F
-
-
Sound Performance - Standard
Note
Machine Sound Level (ISO 6396:2008) - 116 dB(A)
-
-
Sound Performance - Suppression
Note
Machine Sound Level (ISO 6396:2008) - 113 dB(A)
-
-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks
17 ft
-
-
Ground to Top of ROPS
18.3 ft
-
-
Ground to Top of Hood
13.1 ft
-
-
Ground to Center of Front Axle
4.3 ft
-
-
Ground to Bumper Clearance
3.8 ft
-
-
Ground to Lower Hitch Clearance
2.2 ft
-
-
Reach - Maximum Lift
8.2 ft
-
-
Clearance at Maximum Lift
15.2 ft
-
-
B-Pin Height - Maximum Lift
22.8 ft
-
-
Maximum Overall Height - Bucket Raised
30.8 ft
-
-
Rear Axle - Centerline to Bumper
13.5 ft
-
-
Tread Width
10.83 ft
-
-
Rack Back Angle - Maximum Lift
56.9 degrees
-
-
Dump Angle at Maximum Lift
-49.5 degrees
-
-
Rack Back Angle - Ground Level
40.2 degrees
-
-
Width - Over Tires - With Bulge
14.74 ft
-
-
Rack Back Angle - Carry
48.9 degrees
-
-
Wheel Base
19.3 ft
-
-
Maximum Overall Length
50.8 ft
-
-
Front Axle Centerline to Bucket Tip
18 ft
-
-
Dimensions - High Lift - Approximate
Tread Width
10.83 ft
-
-
Rack Back Angle - Ground Level
42.5 degrees
-
-
Dump Angle at Maximum Lift
-48.1 degrees
-
-
Rack Back Angle - Maximum Lift
56.2 degrees
-
-
Width - Over Tires - With Bulge
14.75 ft
-
-
Rack Back Angle - Carry
51.6 degrees
-
-
Ground to Top of Exhaust Stacks
17 ft
-
-
Ground to Top of ROPS
18.3 ft
-
-
Ground to Top of Hood
13.1 ft
-
-
Ground to Center of Front Axle
4.3 ft
-
-
Ground to Bumper Clearance
3.8 ft
-
-
Ground to Lower Hitch Clearance
2.2 ft
-
-
Reach - Maximum Lift
7.6 ft
-
-
Clearance at Maximum Lift
17.2 ft
-
-
B-Pin Height - Maximum Lift
24.5 ft
-
-
Maximum Overall Height - Bucket Raised
32 ft
-
-
Rear Axle - Centerline to Bumper
13.5 ft
-
-
Wheel Base
19.3 ft
-
-
Maximum Overall Length
51.6 ft
-
-
Front Axle Centerline to Bucket Tip
18.8 ft
-
-
Weights
Operating Weight
-
78264 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Bucket Capacities
Bucket Range
-
4.8-17.2 m³ 6.25-22.5 yd³
-
Sound
Note (1)
-
** For machines in European Union countries and in countries that adopt the �EU Directives.�
-
Note (2)
-
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
109
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
112 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
78
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Hydraulic System
Implement System - Maximum Operating Pressure
-
4975 psi
-
Implement System - Maximum Pump Output at 2,250 rpm
-
119 gal/min
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.