CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    992 Wheel Loader
    View Product
    980 XE
    View Product Remove
    972
    View Product Remove
    990 Wheel Loader
    View Product Remove

    Engine
    Net Power 814 HP - - -
    Engine Model Cat® C32B Cat C13 Cat C9.3B C27 Cat®
    Emissions U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent - - U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
    Rated Speed 1750 rpm - - 1,800/min
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard 900 HP - - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient 937 HP - - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard 907 HP - - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient 944 HP - - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard 884 HP - - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient 921 HP - - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard 893 HP - - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient 931 HP - - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard 814 HP - - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient 814 HP - - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard 823 HP - - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient 823 HP - - -
    Bore 5.7 in - - 5.4 in
    Stroke 6.4 in - - 6 in
    Displacement 1963.5 in³ - 9.3 L 1649.5 in³
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm 3514 ft·lbf - - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm 3555 ft·lbf - - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm 3537 ft·lbf - - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm 3570 ft·lbf - - -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 393 HP - -
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. -
    Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1627 lb/ft 1388 lb/ft -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1612 lb/ft 1375 lb/ft -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1539 lb/ft - -
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 420 HP - -
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 425 HP - -
    Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h -
    Engine Power @ 1,600 rpm - ISO 14396:2002 - - 339 HP -
    Gross Power @ 1,600 rpm - SAE J1995:2014 - - 342 HP -
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 - - 321 HP -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 - - 1316 ft-lb -
    Engine Power - ISO 14396 - - - 752 HP
    Gross Power - SAE J1995 - - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - - 699 HP
    Net Power - SAE J1349 - High Ambient - - - 648 HP
    Peak Torque - 1,200 rpm - - - 2624 lb/ft
    Torque Rise - - - 18 %

    Operating Specifications
    Operating Weight 233430 lb - - 178517 lb
    Rated Payload - Standard 25.5 ton (US) - - 17.5 ton (US)
    Rated Payload - Standard (Material Handler) 30 ton (US) - - -
    Rated Payload - High Lift 22.5 ton (US) - - 17.5 ton (US)
    Rated Payload - High Lift (Material Handler) 27 ton (US) - - -
    Bucket Capacity Range 11.5-24.5 m³ (15-32 yd³) - - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
    Cat Truck Match - Standard 775/777 - - 773-775
    Cat Truck Match - High Lift 785 - - 775-777
    Breakout Force - 51008 lbf 44072 lb -
    Note (1) - For a machine configuration as defined under Weight. For a machine configuration as defined under Weight. -
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. -
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 20965 kg 17505 kg -
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 43432 lb 35919 lb -

    Buckets
    Bucket Capacities 11.5-24.5 m³ (15-32 yd³) - - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

    Transmission
    Transmission Type Cat Planetary Powershift - - Cat planetary power shift
    Forward - 1 4.3 mile/h 4.4 mile/h 4.1 mile/h 4.5 mile/h
    Forward - 2 7.4 mile/h 8.4 mile/h 8.4 mile/h 8.3 mile/h
    Forward - 3 12.7 mile/h 14.9 mile/h 15 mile/h 14.2 mile/h
    Direct Drive - Forward 1 Disabled - - Lock-up disabled
    Direct Drive - Forward 2 8 mile/h - - 8.5 mile/h
    Direct Drive - Forward 3 14 mile/h - - 15.2 mile/h
    Reverse - 1 4.7 mile/h 5 mile/h 4.5 mile/h 4.9 mile/h
    Reverse - 2 8.1 mile/h 9.6 mile/h 9.2 mile/h 9.1 mile/h
    Reverse - 3 13.9 mile/h 18.3 mile/h 16.5 mile/h 15.5 mile/h
    Direct Drive - Reverse 1 5 mile/h - - 5.4 mile/h
    Direct Drive - Reverse 2 8.8 mile/h - - 9.6 mile/h
    Direct Drive - Reverse 3 15.3 mile/h - - 16.4 mile/h
    Forward - 4 - 24.5 mile/h 24.5 mile/h -
    Note - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
    Reverse - 4 - - 24.5 mile/h -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control - - Positive flow control
    Lift/Tilt System - Pump Variable Displacement Piston - - -
    Maximum Flow at 2,165 rpm 250 gal/min - - -
    Relief Valve Setting - Lift/Tilt 5000 psi - - 4786 psi
    Lift Cylinder - Bore 9.3 in - - -
    Lift Cylinder - Stroke 63.5 in - - -
    Tilt Cylinder - Bore 11.5 in - - -
    Tilt Cylinder - Stroke 41.5 in - - -
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 1,800 rpm (1) - - - 240 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - - 235 mm × 1287 mm (9.3 in × 50.7 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - - 292.1 mm × 820 mm (11.5 in × 32.3 in)
    Pilot System - - - Open loop and pressure reducing
    Relief Valve Setting - Main - - - 507 psi

    Hydraulic Cycle Times
    Rack Back 2.3 s - - 4.3 s
    Rack Back - High Lift 2.3 s - - -
    Raise 9 s - - 8.2 s
    Raise - High Lift 9 s - - -
    Dump 2.6 s - - 2.9 s
    Dump - High Lift 2.6 s - - -
    Float Down 3.2 s - - -
    Float Down - High Lift 3.2 s - - -
    Total Hydraulic Cycle Time 17.1 s - - -
    Lower - - - 3.7 s
    Lower Float Down - - - 3.6 s
    Total Hydraulic Cycle Time - Empty Bucket - - - 13.8 s

    Service Refill Capacities
    Fuel Tank 385.7 gal (US) 112.5 gal (US) 80.1 gal (US) 294.3 gal (US)
    Cooling Systems 59.4 gal (US) - - -
    Crankcase 31.7 gal (US) 9.8 gal (US) 6.1 gal (US) -
    Transmission 51.5 gal (US) 20.3 gal (US) 15.5 gal (US) 29.1 gal (US)
    Differential - Final Drives - Front 96.4 gal (US) 24.3 gal (US) 15.1 gal (US) 71.6 gal (US)
    Differential - Final Drives - Rear 96.4 gal (US) 24.3 gal (US) 15.1 gal (US) 68.9 gal (US)
    Hydraulic System Factory Fill (Implement) 104.1 gal (US) - - -
    Hydraulic Tank - Implement 60.2 gal (US) - - -
    Hydraulic Factory Fill (Steering) 32.5 gal (US) - - -
    Hydraulic Tank (Steering Tank Only) 26.3 gal (US) - - -
    Cooling System - 13.7 gal (US) 17.4 gal (US) 54.9 gal (US)
    DEF Tank - 5.5 gal (US) 6.9 gal (US) -
    Hydraulic Tank - 40.4 gal (US) 30.1 gal (US) -
    Engine Crankcase - - - 20 gal (US)
    Hydraulic System Factory Fill - - - 210 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - - 68.9 gal (US)
    Hydraulic Tank - Steering and Braking - - - 34.9 gal (US)
    Note - - - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l

    Axles
    Front Fixed - - Fixed
    Rear Trunnion - - Trunnion
    Oscillation Angle ±9° - - 8.5°

    Brakes
    Brakes ISO 3450:2011 - - ISO 3450: 2011

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing - - Pilot, load sensing
    Steering System - Pump Piston, Variable Displacement - - Piston, variable displacement
    Maximum Flow at 1,400-1,850 rpm 70 gal/min - - -
    Steering Cut Off Pressure 4500 psi - - -
    Total Steering Angle 80° - - 70°
    Steering Cycle Times - Low Idle 4.9 s - - -
    Steering Cycle Times - High Idle 3.1 s - - -
    Maximum Flow at 1,400 rpm - - - 96.2 gal/min
    Relief Valve Setting - Steering - - - 5004 psi

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - - -
    Ambient Capability, Hydraulically Driven Demand Fan - High 131 °F - - -

    Sound Performance - Standard
    Note Machine Sound Level (ISO 6396:2008) - 116 dB(A) - - -
    Operator Sound Level (ISO 6396:2008) - - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 115 dB(A)

    Sound Performance - Suppression
    Note Machine Sound Level (ISO 6396:2008) - 113 dB(A) - - -
    Operator Sound Level (ISO 6396:2008) - - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 113 dB(A)

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks 17 ft - - -
    Ground to Top of ROPS 18.3 ft - - -
    Ground to Top of Hood 13.1 ft - - -
    Ground to Center of Front Axle 4.3 ft - - -
    Ground to Bumper Clearance 3.8 ft - - -
    Ground to Lower Hitch Clearance 2.2 ft - - -
    Reach - Maximum Lift 8.2 ft - - -
    Clearance at Maximum Lift 15.2 ft - - -
    B-Pin Height - Maximum Lift 22.8 ft - - -
    Maximum Overall Height - Bucket Raised 30.8 ft - - -
    Rear Axle - Centerline to Bumper 13.5 ft - - -
    Tread Width 10.83 ft - - -
    Rack Back Angle - Maximum Lift 56.9 degrees - - -
    Dump Angle at Maximum Lift -49.5 degrees - - -
    Rack Back Angle - Ground Level 40.2 degrees - - -
    Width - Over Tires - With Bulge 14.74 ft - - -
    Rack Back Angle - Carry 48.9 degrees - - -
    Wheel Base 19.3 ft - - -
    Maximum Overall Length 50.8 ft - - -
    Front Axle Centerline to Bucket Tip 18 ft - - -

    Dimensions - High Lift - Approximate
    Tread Width 10.83 ft - - -
    Rack Back Angle - Ground Level 42.5 degrees - - -
    Dump Angle at Maximum Lift -48.1 degrees - - -
    Rack Back Angle - Maximum Lift 56.2 degrees - - -
    Width - Over Tires - With Bulge 14.75 ft - - -
    Rack Back Angle - Carry 51.6 degrees - - -
    Ground to Top of Exhaust Stacks 17 ft - - -
    Ground to Top of ROPS 18.3 ft - - -
    Ground to Top of Hood 13.1 ft - - -
    Ground to Center of Front Axle 4.3 ft - - -
    Ground to Bumper Clearance 3.8 ft - - -
    Ground to Lower Hitch Clearance 2.2 ft - - -
    Reach - Maximum Lift 7.6 ft - - -
    Clearance at Maximum Lift 17.2 ft - - -
    B-Pin Height - Maximum Lift 24.5 ft - - -
    Maximum Overall Height - Bucket Raised 32 ft - - -
    Rear Axle - Centerline to Bumper 13.5 ft - - -
    Wheel Base 19.3 ft - - -
    Maximum Overall Length 51.6 ft - - -
    Front Axle Centerline to Bucket Tip 18.8 ft - - -

    Weights
    Operating Weight - 66877 lb 54858 lb -
    Note - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second -

    Bucket Capacities
    Bucket Range - 4.0-14.5 m³ 5.25-19 yd³ 2.8-14.0 m³ 3.75-18.25 yd³ -

    Sound
    Note (1) - For machines in European Union countries and in countries that adopt the EU Directives. ** For machines in European Union countries and in countries that adopt the EU Directives. -
    Note (2) - European Union Directive 2000/14/EC as amended by 2005/88/EC. ***European Union Directive 2000/14/EC as amended by 2005/88/EC. -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 110 108 -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 69 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 107 dB(A) 109 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 75 76 -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 70 dB(A) 70 dB(A) -
    With Cooling Fan Speed at Maximum Value - Note - - Distance of 15 m (49.2 ft), moving forward in second gear ratio. -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi 4496 psi -
    Hydraulic Cycle Time - Total - 10.1 seconds 10.7 seconds -
    Implement System - Maximum Pump Output at 2,250 rpm - - 99 gal/min -

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.9 ft 8.1 ft -
    Centerline of Rear Axle to Hitch - 6.3 ft 5.1 ft -
    Ground Clearance - 1.5 ft 1.4 ft -
    Height - Top of Exhaust Pipe - 12.5 ft 11.8 ft -
    Height - Top of Hood - 10.1 ft 9.5 ft -
    Height - Top of ROPS - 12.7 ft 11.1 ft -
    Hinge Pin Height at Carry - 2.2 ft 2.6 ft -
    Hinge Pin Height at Maximum Lift - 15.7 ft 15.9 ft -
    Lift Arm Clearance at Maximum Lift - 13.6 ft 13.8 ft -
    Overall Length - Without Bucket - 27.5 ft 26.6 ft -
    Tread Width - 8 ft 7.3 ft -
    Wheel Base - 12.6 ft 11.8 ft -
    Width over Tires (Loaded) - 10.9 ft 9.11 ft -
    Rack Back at Ground - - 37 degrees -
    Rack Back - Maximum Lift - - 71 degrees -
    Rack Back - Carry Height - - 49 degrees -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.7 ft 8 ft -
    Centerline of Rear Axle to Hitch - 6.3 ft 5.1 ft -
    Ground Clearance - 456 mm 420 mm -
    Height - Top of Exhaust Pipe - 3764 mm 3527 mm -
    Height - Top of Hood - 3064 mm 2846 mm -
    Height - Top of ROPS - 3829 mm 3589 mm -
    Hinge Pin Height at Carry - 2 ft 2.2 ft -
    Hinge Pin Height at Maximum Lift - 4554 mm 4464 mm -
    Lift Arm Clearance at Maximum Lift - 3881 mm 3843 mm -
    Overall Length - Without Bucket - 8155 mm 7731 mm -
    Tread Width - 8 ft 7.3 ft -
    Wheel Base - 3800 mm 3550 mm -
    Width over Tires (Loaded) - 10.9 ft 9.11 ft -
    Rack Back at Ground - - 39 degrees -
    Rack Back - Maximum Lift - - 56 degrees -
    Rack Back - Carry Height - - 49 degrees -

    Sustainability
    Recyclability - 98% - -
    Add a Similar Product: