CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    950 GC Wheel Loader | Front Loader
    View Product
    988 Wheel Loader
    View Product Remove
    980 XE
    View Product Remove

    Engine
    Net Power - ISO 9249 225 HP - -
    Emissions Tier 4/Stage V U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II -
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons). - -
    Bore 4.13 in 5.7 in -
    Stroke 5.31 in 7.2 in -
    Displacement 428 in³ 1105 in³ -
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric 228 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 240 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 - Metric 243 HP - -
    Peak Gross Torque - 1,400 rpm - SAE J1995 811 ft·lbf - -
    Peak Gross Torque - 1,400 rpm - ISO 14396 805 ft·lbf - -
    Engine Model Cat C7.1 Cat® C18 ™ Cat C13
    Maximum Net Power - 1,700 rpm - ISO 9249 225 HP - -
    Maximum Net Power - 1,700 rpm - SAE J1349 225 HP - -
    Maximum Power - 1,700 rpm - SAE J1995 241 HP - -
    Net Power - SAE J1349:2011 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1700/min -
    Peak Power Speed - 1500/rpm -
    Peak Torque - 1,200 rpm - 2230 lb/ft -
    Torque Rise - 58 % -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (1) - - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 420 HP
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP
    Note (3) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Weights
    Operating Weight 41554 lb - 66877 lb
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Buckets
    Bucket Capacities 2.9-4.4 m³ (3.75-5.75 yd³) 4.7-13 m3 (6.2-17 yd3) -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)* - -
    Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio. - For machines in European Union countries and in countries that adopt the EU Directives.
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 73 dB(A) - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) For machines in European Union countries and in countries that adopt the EU Directives - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 107 LWA*** - -
    Note (3) ***European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    Note (2) **For machines in European Union countries and in countries that adopt the "EU Directives." - European Union Directive 2000/14/EC as amended by 2005/88/EC.
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 110
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 107 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 75
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A)

    Dimensions
    Rack Back - Ground 40 degrees - -
    Height - Top of Exhaust Pipe 11.17 ft - -
    Centerline of Rear Axle to Hitch 5.42 ft - -
    Lift Arm Clearance 12 ft - -
    B-Pin Height 13.75 ft - -
    Centerline of Rear Axle to Edge of Counterweight 6.75 ft - -
    Ground Clearance 1.5 ft - -
    Rack Back - Maximum Lift 60 degrees - -
    Height - Top of Hood 8.75 ft - -
    Wheel Base 10.83 ft - -
    Height - Top of ROPS 11.33 ft - -
    Rack Back - Carry 45 degrees - -
    Note All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires. - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Weights and Operating Specifications
    Note (2) *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Tipping Load - Full Turn - Rigid Tires** 25875 lb - -
    Breakout Force 34638 lbf - -
    Tipping Load - Full Turn - ISO 14397-1* 24264 lb - -
    Note (3) **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. - -
    Operating Weight 41554 lb - -
    Note (1) For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound - -

    Transmission
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius. - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Reverse - 3 14.2 mile/h 14.4 mile/h 18.3 mile/h
    Forward - 3 14.2 mile/h 12.7 mile/h 14.9 mile/h
    Forward - 1 4.5 mile/h 4 mile/h 4.4 mile/h
    Forward - 2 8 mile/h 7.2 mile/h 8.4 mile/h
    Forward - 4 22.4 mile/h 21.6 mile/h 24.5 mile/h
    Reverse - 2 8 mile/h 8.3 mile/h 9.6 mile/h
    Reverse - 1 4.5 mile/h 4.7 mile/h 5 mile/h
    Transmission Type - Cat planetary powershift -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.8 mile/h -
    Direct Drive - Forward 3 - 13.9 mile/h -
    Direct Drive - Forward 4 - 24.4 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h -
    Direct Drive - Reverse 2 - 8.9 mile/h -
    Direct Drive - Reverse 3 - 15.8 mile/h -

    Hydraulic System
    Hydraulic Cycle Time - Total Cycle Time 9.4 s - -
    Steering System - Pump Type Piston - -
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) 4047 psi - -
    Implement System - Maximum Pump Output at 2,390 rpm 68 gal/min - -
    Implement System - Maximum Operating Pressure - - 4975 psi
    Hydraulic Cycle Time - Total - - 10.1 seconds

    Service Refill Capacities
    DEF Tank 4.2 gal (US) - 5.5 gal (US)
    Transmission 11.9 gal (US) 31.7 gal (US) 20.3 gal (US)
    Fuel Tank Size 76.6 gal (US) - -
    Cooling System 13.2 gal (US) 31.7 gal (US) 13.7 gal (US)
    Differential - Final Drives - Rear 10 gal (US) 49.1 gal (US) 24.3 gal (US)
    Differential - Final Drives - Front 10.6 gal (US) 49.1 gal (US) 24.3 gal (US)
    Crankcase 4.8 gal (US) 15.9 gal (US) 9.8 gal (US)
    Hydraulic Tank 29.6 gal (US) - 40.4 gal (US)
    Fuel Tank - 188 gal (US) 112.5 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) - 33 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities - 29 gal (US) -
    Hydraulic System Factory Fill - 125.5 gal (US) -
    Hydraulic System - Tank Only - 63.4 gal (US) -

    Engine - Tier 4 Final/Stage IV
    Emissions Tier 4/Stage IV - -

    Operating Specifications
    Operating Weight - 112574 lb -
    Rated Payload - Quarry Face - 12.5 t -
    Rated Payload - Loose Material - 16 t -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) -
    Cat Truck Match - Standard - 770～772 -
    Cat Truck Match - High Lift - 773～775 -
    Breakout Force - - 51008 lbf
    Note (1) - - For a machine configuration as defined under Weight.
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH- Positive Flow Control, Flow Sharing -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,400-1,860 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 210 mm × 1050 mm (8.7 in × 41.3 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 269 mm × 685 mm (8.7 in × 27 in) -
    Pilot System - Variable displacement piston -
    Relief Valve Setting - Main - 551 psi -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - 4.5 s -
    Raise - 8 s -
    Dump - 2.2 s -
    Lower Float Down - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement -
    Maximum Flow - 71.3 gal/min -
    Relief Valve Setting - Steering - 4351 psi -
    Total Steering Angle - 86 ° -
    Steering Cycle Times - High Idle - 3.4 s -
    Steering Cycle Times - Low Idle - 5.6 s -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - 13 ° -

    Brakes
    Brakes - ISO 3450:2011 -

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.5 ft
    Height - Top of Exhaust Pipe - - 12.5 ft
    Height - Top of Hood - - 10.1 ft
    Height - Top of ROPS - - 12.7 ft
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 15.7 ft
    Lift Arm Clearance at Maximum Lift - - 13.6 ft
    Overall Length - Without Bucket - - 27.5 ft
    Tread Width - - 8 ft
    Wheel Base - - 12.6 ft
    Width over Tires (Loaded) - - 10.9 ft

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.7 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 456 mm
    Height - Top of Exhaust Pipe - - 3764 mm
    Height - Top of Hood - - 3064 mm
    Height - Top of ROPS - - 3829 mm
    Hinge Pin Height at Carry - - 2 ft
    Hinge Pin Height at Maximum Lift - - 4554 mm
    Lift Arm Clearance at Maximum Lift - - 3881 mm
    Overall Length - Without Bucket - - 8155 mm
    Tread Width - - 8 ft
    Wheel Base - - 3800 mm
    Width over Tires (Loaded) - - 10.9 ft

    Sustainability
    Recyclability - - 98%
    Add a Similar Product: