CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    950 GC Wheel Loader | Front Loader
    View Product
    986 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Net Power - ISO 9249 225 HP - -
    Emissions Tier 4/Stage V U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons). - -
    Bore 4.13 in 5.4 in 6.7 in
    Stroke 5.31 in 6.75 in 8.5 in
    Displacement 428 in³ 927 in² 4766 in³
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric 228 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 240 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 - Metric 243 HP - -
    Peak Gross Torque - 1,400 rpm - SAE J1995 811 ft·lbf - -
    Peak Gross Torque - 1,400 rpm - ISO 14396 805 ft·lbf - -
    Engine Model Cat C7.1 C15 Cat® Cat® 3516E
    Maximum Net Power - 1,700 rpm - ISO 9249 225 HP - -
    Maximum Net Power - 1,700 rpm - SAE J1349 225 HP - -
    Maximum Power - 1,700 rpm - SAE J1995 241 HP - -
    Peak Power Speed - 1600 -
    Peak Power Speed - Gross - SAE J1995 - 456 HP -
    Engine Power - ISO 14396 - 449 HP 1847 HP
    Net Power - SAE J1349 - 373 HP -
    Rated Speed - 2000 -
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft 8549 lb/ft
    Torque Rise - 16% 39%
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 41554 lb - -

    Buckets
    Bucket Capacities 2.9-4.4 m³ (3.75-5.75 yd³) - -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)* - -
    Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 73 dB(A) - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) For machines in European Union countries and in countries that adopt the EU Directives - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 107 LWA*** - -
    Note (3) ***European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    Note (2) **For machines in European Union countries and in countries that adopt the "EU Directives." - -
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - -

    Dimensions
    Rack Back - Ground 40 degrees - -
    Height - Top of Exhaust Pipe 11.17 ft - -
    Centerline of Rear Axle to Hitch 5.42 ft - -
    Lift Arm Clearance 12 ft - -
    B-Pin Height 13.75 ft - -
    Centerline of Rear Axle to Edge of Counterweight 6.75 ft - -
    Ground Clearance 1.5 ft - -
    Rack Back - Maximum Lift 60 degrees - -
    Height - Top of Hood 8.75 ft - -
    Wheel Base 10.83 ft - -
    Height - Top of ROPS 11.33 ft - -
    Rack Back - Carry 45 degrees - -
    Note All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires. - -

    Weights and Operating Specifications
    Note (2) *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Tipping Load - Full Turn - Rigid Tires** 25875 lb - -
    Breakout Force 34638 lbf - -
    Tipping Load - Full Turn - ISO 14397-1* 24264 lb - -
    Note (3) **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. - -
    Operating Weight 41554 lb - -
    Note (1) For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound - -

    Transmission
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius. - Travel speeds based on 58/85-57 tires.
    Reverse - 3 14.2 mile/h - 14.9 mile/h
    Forward - 3 14.2 mile/h - 13.6 mile/h
    Forward - 1 4.5 mile/h 5 mile/h 4.6 mile/h
    Forward - 2 8 mile/h 8 mile/h 8 mile/h
    Forward - 4 22.4 mile/h - -
    Reverse - 2 8 mile/h 8 mile/h 8.8 mile/h
    Reverse - 1 4.5 mile/h 5 mile/h 5 mile/h
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - 24 mile/h -
    Direct Drive - Reverse 2 - 9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 16 mile/h 16.8 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Direct Drive - Forward 1 - - Lock-up disables
    Direct Drive - Reverse 1 - - Lock-up disables

    Hydraulic System
    Hydraulic Cycle Time - Total Cycle Time 9.4 s - -
    Steering System - Pump Type Piston - -
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) 4047 psi - -
    Implement System - Maximum Pump Output at 2,390 rpm 68 gal/min - -

    Service Refill Capacities
    DEF Tank 4.2 gal (US) - -
    Transmission 11.9 gal (US) 20 gal (US) -
    Fuel Tank Size 76.6 gal (US) - -
    Cooling System 13.2 gal (US) - -
    Differential - Final Drives - Rear 10 gal (US) - -
    Differential - Final Drives - Front 10.6 gal (US) - -
    Crankcase 4.8 gal (US) 9 gal (US) -
    Hydraulic Tank 29.6 gal (US) - -
    Fuel Tank - 141 gal (US) -
    Fuel Tank - Short Lift - 127 gal (US) -
    Cooling Systems - 26 gal (US) -
    Diesel Exhaust Fluid Tank - 6 gal (US) -
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) -
    Hydraulic System Factory Fill - 87 gal (US) -
    Hydraulic System - Tank Only - 34 gal (US) -

    Engine - Tier 4 Final/Stage IV
    Emissions Tier 4/Stage IV - -

    Operating Specifications
    Operating Weight - Standard - 97785 lb 543772 lb
    Operating Weight - High Lift - 104005 lb 547675 lb
    Rated Payload - Standard (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) -
    Bucket Capacity Range - 5-10,3 m³ (6,5-13,5 yd.³) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 770/735/740/745 785/789
    Cat Truck Match - High Lift - 772/773 789/793/794
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Load Sense Positive Flow Control
    Lift/Tilt System - Pump - 2 × 110 cc variable displacement Variable Displacement Piston
    Maximum Flow at 2,165 rpm - 123 gal/min -
    Relief Valve Setting - Lift/Tilt - 4050 psi 5004 psi
    Lift Cylinder - Bore - 7.5 in -
    Lift Cylinder - Stroke - 45 in -
    Tilt Cylinder - Bore - 6.7 in -
    Tilt Cylinder - Stroke - 28.4 in -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back - 4.5 s 4.9 s
    Raise - 9 s 12.6 s
    Dump - 3.5 s 3.1 s
    Lower - 5.2 s -
    Lower Float Down - 4.3 s 4.2 s
    Total Hydraulic Cycle Time - 21.3 s -

    Hydraulic System - Steering
    Steering System - Circuit - Load Sense Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400 rpm - 52 gal/min -
    Steering Cut Off Pressure - 4000 psi -
    Total Steering Angle - 70° 80 degrees
    Steering Cycle Times - Low Idle - - 7.6 s
    Steering Cycle Times - High Idle - - 4.3 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - ±12.5° 9°
    Oscillation Angle - Chain Arrangement - ±8.5° -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.1 ft -
    Clearance at Maximum Lift - 10.1 ft -
    B-Pin Height - Maximum Lift - 16.1 ft -
    Maximum Overall Height - Bucket Raised - 22.4 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 36.6 ft -
    Front Axle Centerline to Bucket Tip - 13.8 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.4 ft -
    Clearance at Maximum Lift - 11.6 ft -
    B-Pin Height - Maximum Lift - 17.6 ft -
    Maximum Overall Height - Bucket Raised - 23.9 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 38 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach at Maximum Lift - 8 ft -
    Clearance at Maximum Lift - 10.7 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Maximum Overall Height, Bucket Raised - 20.9 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35 ft -
    Front Axle Centerline to Bucket Tip - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35.4 ft -
    Front Axle Centerline to Bucket Tip - 12.6 ft -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product: