CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    950 GC Wheel Loader | Front Loader
    View Product
    988 GC Wheel Loader
    View Product Remove
    988 XE Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Net Power - ISO 9249 225 HP - - -
    Emissions Tier 4/Stage V U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons). - - -
    Bore 4.13 in 5.4 in 5.7 in 6.7 in
    Stroke 5.31 in 6.75 in 7.2 in 8.5 in
    Displacement 428 in³ 927 in³ 1105 in³ 4766 in³
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric 228 HP - - -
    Maximum Power - 1,700 rpm - ISO 14396 240 HP - - -
    Maximum Power - 1,700 rpm - ISO 14396 - Metric 243 HP - - -
    Peak Gross Torque - 1,400 rpm - SAE J1995 811 ft·lbf - - -
    Peak Gross Torque - 1,400 rpm - ISO 14396 805 ft·lbf - - -
    Engine Model Cat C7.1 Cat® C15 Cat® C18 ™ Cat® 3516E
    Maximum Net Power - 1,700 rpm - ISO 9249 225 HP - - -
    Maximum Net Power - 1,700 rpm - SAE J1349 225 HP - - -
    Maximum Power - 1,700 rpm - SAE J1995 241 HP - - -
    Rated Speed - 2000 1,700 rpm -
    Peak Power Speed - 1600 1,500 rpm -
    Engine Power - ISO 14396 - 449 HP - 1847 HP
    Gross Power - SAE J1995 - 456 HP - 1870 HP
    Net Power - SAE J1349 - 373 HP 538 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 ft·lbf 2230 ft·lbf 8549 lb/ft
    Torque Rise - 16% 58% 39%
    Engine Power - ISO 14396:2002 - - 580 HP -
    Gross Power - SAE J1995:2014 - - 588 HP -
    Net Power - SAE J1349 - Standard Ambient - - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - - 1696 HP
    Note (1) - - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 41554 lb - - -

    Buckets
    Bucket Capacities 2.9-4.4 m³ (3.75-5.75 yd³) 6.4-7.6 m3 (8.3-10 yd3) 4.7-13 m3 (6.2-17 yd3) -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)* - - -
    Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) European Union Directive "2000/14/EC" as amended by "2005/88/EC." - - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 73 dB(A) - - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) For machines in European Union countries and in countries that adopt the EU Directives - - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 107 LWA*** - - -
    Note (3) ***European Union Directive "2000/14/EC" as amended by "2005/88/EC." - - -
    Note (2) **For machines in European Union countries and in countries that adopt the "EU Directives." - - -
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - - -
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - - -

    Dimensions
    Rack Back - Ground 40 degrees - - -
    Height - Top of Exhaust Pipe 11.17 ft - - -
    Centerline of Rear Axle to Hitch 5.42 ft - - -
    Lift Arm Clearance 12 ft - - -
    B-Pin Height 13.75 ft - - -
    Centerline of Rear Axle to Edge of Counterweight 6.75 ft - - -
    Ground Clearance 1.5 ft - - -
    Rack Back - Maximum Lift 60 degrees - - -
    Height - Top of Hood 8.75 ft - - -
    Wheel Base 10.83 ft - - -
    Height - Top of ROPS 11.33 ft - - -
    Rack Back - Carry 45 degrees - - -
    Note All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires. - - -

    Weights and Operating Specifications
    Note (2) *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - -
    Tipping Load - Full Turn - Rigid Tires** 25875 lb - - -
    Breakout Force 34638 lbf - - -
    Tipping Load - Full Turn - ISO 14397-1* 24264 lb - - -
    Note (3) **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. - - -
    Operating Weight 41554 lb - - -
    Note (1) For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound - - -

    Transmission
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius. - - Travel speeds based on 58/85-57 tires.
    Reverse - 3 14.2 mile/h - - 14.9 mile/h
    Forward - 3 14.2 mile/h - - 13.6 mile/h
    Forward - 1 4.5 mile/h 5 mile/h - 4.6 mile/h
    Forward - 2 8 mile/h 8 mile/h - 8 mile/h
    Forward - 4 22.4 mile/h - - -
    Reverse - 2 8 mile/h 8 mile/h - 8.8 mile/h
    Reverse - 1 4.5 mile/h 5 mile/h - 5 mile/h
    Transmission Type - Cat planetary power shift Cat switched reluctance electric drive Cat Planetary Power Shift
    Direct Drive - Forward 1 - Lock-up disabled - Lock-up disables
    Direct Drive - Forward 2 - 8 mile/h - 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h - 15.2 mile/h
    Direct Drive - Forward 4 - 24 mile/h - -
    Direct Drive - Reverse 1 - Lock-up disabled - Lock-up disables
    Direct Drive - Reverse 2 - 9 mile/h - 9.6 mile/h
    Direct Drive - Reverse 3 - 16 mile/h - 16.8 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h - -
    Forward 1 (virtual) - - 4.3 mile/h -
    Forward 2 (virtual) - - 7 mile/h -
    Forward 3 (virtual) - - 13.8 mile/h -
    Forward 4 (virtual) - - 20 mile/h -
    Reverse 1 (virtual) - - 4.3 mile/h -
    Reverse 2 (virtual) - - 7 mile/h -
    Reverse 3 (virtual) - - 17.5 mile/h -

    Hydraulic System
    Hydraulic Cycle Time - Total Cycle Time 9.4 s - - -
    Steering System - Pump Type Piston - - -
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) 4047 psi - - -
    Implement System - Maximum Pump Output at 2,390 rpm 68 gal/min - - -

    Service Refill Capacities
    DEF Tank 4.2 gal (US) - - -
    Transmission 11.9 gal (US) 20 gal (US) 16 gal (US) -
    Fuel Tank Size 76.6 gal (US) - - -
    Cooling System 13.2 gal (US) 27 gal (US) - -
    Differential - Final Drives - Rear 10 gal (US) 45 gal (US) 49 gal (US) -
    Differential - Final Drives - Front 10.6 gal (US) 49 gal (US) 49 gal (US) -
    Crankcase 4.8 gal (US) - - -
    Hydraulic Tank 29.6 gal (US) - - -
    Fuel Tank - 141 gal (US) 147 gal (US) -
    Engine Crankcase - 9 gal (US) 16 gal (US) -
    Diesel Exhaust Fluid Tank - 5.5 gal (US) 8.7 gal (US) -
    Note - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -
    Cooling System - Jacket Water - - 30 gal (US) -
    Cooling Systems - Power Train - - 8 gal (US) -
    Hydraulic System - Implement/Steering - - 126 gal (US) -

    Engine - Tier 4 Final/Stage IV
    Emissions Tier 4/Stage IV - - -

    Operating Specifications
    Operating Weight - 116858 lb 116362 lb -
    Rated Payload - Quarry Face - 12.5 ton (US) - -
    Bucket Capacity Range - 6.4-7.6 m3 (8.3-10 yd3) 4.7-13 m3 (6.2-17 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - High Lift - 772/773/775 - 789/793/794
    Operating Weight - Standard - - 116362 lb 543772 lb
    Operating Weight - High Lift - - 119618 lb 547675 lb
    Rated Payload - Standard (Quarry Face) - - 12.5 ton (US) -
    Rated Payload - Loose Material (Standard) - - 16 ton (US) -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - - 50 ton (US)
    Note - - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
    Cat Truck Match - Standard - - - 785/789

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH - Load Sense EH-Positive Flow Control, Flow Sharing Positive Flow Control
    Lift/Tilt System - 2X x 145 cc Variable displacement piston - -
    Maximum Flow at 2,165 rpm - 159 gal/min - -
    Relief Valve Setting - Lift/Tilt - 4598 psi 4757 psi 5004 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 190 mm x 1216 mm (7.5 in x 48 in) - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 170 mm x 722 mm (6.7 in x 28.4 in) - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - Variable displacement piston - Open Loop and Pressure Reducing
    Tilt Cylinder - Stroke - 27 in 27 in -
    Lift/Tilt System - Pump - - Variable displacement piston Variable Displacement Piston
    Maximum Flow at 1,400-1,600 rpm - - 153 gal/min -
    Lift Cylinder - Bore - - 8.7 in -
    Lift Cylinder - Stroke - - 41.3 in -
    Tilt Cylinder - Bore - - 8.7 in -
    Maximum Flow at 1,700 rpm Engine Speed - - - 541 gal/min

    Hydraulic Cycle Times
    Rack Back - 3.8 s 4.5 s 4.9 s
    Raise - 7.5 s 8 s 12.6 s
    Dump - 3 s 2.2 s 3.1 s
    Lower Float Down - 4.6 s 3.5 s 4.2 s
    Total Hydraulic Cycle Time - Empty Bucket - 18.9 s - -
    Total Hydraulic Cycle Time - - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement Piston, Variable Displacement
    Maximum Flow - 52 gal (US) - -
    Relief Valve Setting - Steering - 4000 psi - -
    Total Steering Angle - 70° 86° 80 degrees
    Steering Cycle Times - High Idle - 3 s 3.4 s 4.3 s
    Steering Cycle Times - Low Idle - 5.2 s 5.6 s 7.6 s
    Maximum Flow at 1,400-1,600 rpm - - 71.3 gal/min -
    Steering Cut Off Pressure - - 4351 psi -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Axles
    Front - Fixed Fixed Fixed
    Rear - Trunnion Trunnion Trunnion
    Oscillation Angle - +/-12.5° 13° 9°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) - -
    Machine Sound Level (ISO 6395) - 110 dB(A) - -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.5 ft 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft 14.8 ft -
    Ground to Top of Hood - 10.7 ft 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.7 ft 15.3 ft -
    Wheel Base - 12.5 ft 14.9 ft -
    Maximum Overall Length - 39.5 ft 40.7 ft -
    Ground to Lower Hitch Clearance - 1.5 ft 1.9 ft -
    Clearance at Maximum Lift - 12 ft 13.3 ft -
    B-Pin Height - Maximum Lift - 18.7 ft 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25 ft 25.8 ft -
    Reach - Maximum Lift - 7.7 ft 6.8 ft -
    Note - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -
    Ground to Bumper Clearance - - 3.1 ft -
    Ground to Center of Axles - - 3.2 ft -

    Sustainability
    Recyclability - 96% 96% -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 110 dB(A) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - - 13.8 ft -
    Ground to Top of Exhaust Stacks - - 14.8 ft -
    Ground to Top of Hood - - 10.9 ft -
    Ground to Bumper Clearance - - 3.1 ft -
    Rear Axle - Centerline to Bumper - - 10.5 ft -
    Front Axle Centerline to Bucket Tip - - 14 ft -
    Wheel Base - - 14.9 ft -
    Maximum Overall Length - - 39.3 ft -
    Ground to Lower Hitch Clearance - - 1.9 ft -
    Ground to Center of Axles - - 3.2 ft -
    Clearance at Maximum Lift - - 11.9 ft -
    B-Pin Height - Maximum Lift - - 18 ft -
    Maximum Overall Height - Bucket Raised - - 24.5 ft -
    Reach - Maximum Lift - - 6.5 ft -
    Note - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - - 13.8 ft -
    Ground to Top of Exhaust Stacks - - 13.8 ft -
    Ground to Top of Hood - - 10.9 ft -
    Ground to Bumper Clearance - - 3.1 ft -
    Rear Axle - Centerline to Bumper - - 10.5 ft -
    Front Axle Centerline to Fork Tip - - 16.5 ft -
    Wheel Base - - 14.9 ft -
    Maximum Overall Length - - 41.9 ft -
    Ground to Lower Hitch Clearance - - 1.9 ft -
    Ground to Center of Front Axle - - 3.2 ft -
    Fork Height with Level Arms - - 8.1 ft -
    Fork Top Clamp Opening - - 13.1 ft -
    Fork Height at Maximum Lift - - 17.2 ft -
    Hinge Pin Height at Maximum Lift - - 16.1 ft -
    Dump Angle at Maximum Lift - - -39.4 ° -

    Complete System Fill
    Fuel Tank - Standard - - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - - 1414 gal (US)
    Cooling System - - - 138 gal (US)
    Engine Crankcase - - - 76 gal (US)
    Transmission - - - 110 gal (US)
    Differential - Final Drives - Front - - - 220 gal (US)
    Differential - Final Drives - Rear - - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - - 100 gal (US)
    Oil Renewal System (ORS)* - - - 20 gal (US)
    Note - - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - - 127.4 °F

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 119 dB(A)
    Note - - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 117 dB(A)
    Note - - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - - 28.8 ft
    Clearance at Maximum Lift - - - 19.8 ft
    Dump Angle at Maximum Lift - - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - - 21.9 ft
    Ground to Bumper Clearance - - - 4.4 ft
    Ground to Center of Axles - - - 6 ft
    Ground to Lower Hitch Clearance - - - 2.9 ft
    Ground to Top of Exhaust Stacks - - - 23.2 ft
    Ground to Top of Hood - - - 18.6 ft
    Ground to Top of ROPS - - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - - 39.3 ft
    Maximum Overall Length - - - 64.6 ft
    Note - - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - - 59.5 degrees
    Rack Back Angle - Carry - - - 47.7 degrees
    Rack Back Angle - Ground Level - - - 39.7 degrees
    Reach - Maximum Lift - - - 9.6 ft
    Rear Axle - Centerline to Bumper - - - 20.4 ft
    Tread Width - - - 14.1 ft
    Wheel Base - - - 22.3 ft
    Width - Over Tires - With Bulge - - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - - 31.6 ft
    Clearance at Maximum Lift - - - 22.6 ft
    Dump Angle at Maximum Lift - - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - - 24.2 ft
    Ground to Bumper Clearance - - - 4.4 ft
    Ground to Center of Axles - - - 6 ft
    Ground to Lower Hitch Clearance - - - 2.9 ft
    Ground to Top of Exhaust Stacks - - - 23.2 ft
    Ground to Top of Hood - - - 18.6 ft
    Ground to Top of ROPS - - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - - 42.1 ft
    Maximum Overall Length - - - 66.9 ft
    Note - - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - - 59.4 degrees
    Rack Back Angle - Carry - - - 53.5 degrees
    Rack Back Angle - Ground Level - - - 45 degrees
    Reach - Maximum Lift - - - 9.4 ft
    Rear Axle - Centerline to Bumper - - - 20.4 ft
    Tread Width - - - 14.1 ft
    Wheel Base - - - 22.3 ft
    Width - Over Tires - With Bulge - - - 18.8 ft
    Add a Similar Product: