Compare

Compare Equipment Go Back

Engine
	950 GC Wheel Loader \| Front Loader View Product	992 Wheel Loader View Product Remove	988 GC Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Net Power - ISO 9249	225 HP	-	-	-
Emissions	Tier 4/Stage V	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Note	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons).	-	-	-
Bore	4.13 in	5.7 in	5.4 in	5.7 in
Stroke	5.31 in	6.4 in	6.75 in	7.2 in
Displacement	428 in³	1963.5 in³	927 in³	1105 in³
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric	228 HP	-	-	-
Maximum Power - 1,700 rpm - ISO 14396	240 HP	-	-	-
Maximum Power - 1,700 rpm - ISO 14396 - Metric	243 HP	-	-	-
Peak Gross Torque - 1,400 rpm - SAE J1995	811 ft·lbf	-	-	-
Peak Gross Torque - 1,400 rpm - ISO 14396	805 ft·lbf	-	-	-
Engine Model	Cat C7.1	Cat® C32B	Cat® C15	Cat® C18 ™
Maximum Net Power - 1,700 rpm - ISO 9249	225 HP	-	-	-
Maximum Net Power - 1,700 rpm - SAE J1349	225 HP	-	-	-
Maximum Power - 1,700 rpm - SAE J1995	241 HP	-	-	-
Net Power	-	814 HP	-	-
Rated Speed	-	1750 rpm	2000	1,700 rpm
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	900 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	937 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	907 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	944 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	884 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	921 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	893 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	931 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	814 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	814 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	823 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	823 HP	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	3514 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	3555 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	3537 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	3570 ft·lbf	-	-
Peak Power Speed	-	-	1600	1,500 rpm
Engine Power - ISO 14396	-	-	449 HP	-
Gross Power - SAE J1995	-	-	456 HP	-
Net Power - SAE J1349	-	-	373 HP	538 HP
Peak Torque - 1,200 rpm - SAE J1995	-	-	1778 ft·lbf	2230 ft·lbf
Torque Rise	-	-	16%	58%
Engine Power - ISO 14396:2002	-	-	-	580 HP
Gross Power - SAE J1995:2014	-	-	-	588 HP
Weights
Operating Weight	41554 lb	-	-	-
Buckets
Bucket Capacities	2.9-4.4 m³ (3.75-5.75 yd³)	11.5-24.5 m³ (15-32 yd³)	6.4-7.6 m3 (8.3-10 yd3)	4.7-13 m3 (6.2-17 yd3)
Sound
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	76 dB(A)*	-	-	-
Note (1)	*Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (2)	European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	73 dB(A)	-	-	-
With Cooling Fan Speed at 70% of Maximum Value: Note (1)	For machines in European Union countries and in countries that adopt the EU Directives	-	-	-
With Cooling Fan Speed at Maximum Value - Note	Distance of 15 m (49.2 ft), moving forward in second gear ratio.	-	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	107 LWA***	-	-	-
Note (3)	***European Union Directive "2000/14/EC" as amended by "2005/88/EC."	-	-	-
Note (2)	**For machines in European Union countries and in countries that adopt the "EU Directives."	-	-	-
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	-	-
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	109 dB(A)	-	-	-
Dimensions
Rack Back - Ground	40 degrees	-	-	-
Height - Top of Exhaust Pipe	11.17 ft	-	-	-
Centerline of Rear Axle to Hitch	5.42 ft	-	-	-
Lift Arm Clearance	12 ft	-	-	-
B-Pin Height	13.75 ft	-	-	-
Centerline of Rear Axle to Edge of Counterweight	6.75 ft	-	-	-
Ground Clearance	1.5 ft	-	-	-
Rack Back - Maximum Lift	60 degrees	-	-	-
Height - Top of Hood	8.75 ft	-	-	-
Wheel Base	10.83 ft	-	-	-
Height - Top of ROPS	11.33 ft	-	-	-
Rack Back - Carry	45 degrees	-	-	-
Note	All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.	-	-	-
Weights and Operating Specifications
Note (2)	*Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-	-
Tipping Load - Full Turn - Rigid Tires**	25875 lb	-	-	-
Breakout Force	34638 lbf	-	-	-
Tipping Load - Full Turn - ISO 14397-1*	24264 lb	-	-	-
Note (3)	**Compliance to ISO (2007) 14397-1 Sections 1 thru 5.	-	-	-
Operating Weight	41554 lb	-	-	-
Note (1)	For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound	-	-	-
Transmission
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius.	-	-	-
Reverse - 3	14.2 mile/h	13.9 mile/h	-	-
Forward - 3	14.2 mile/h	12.7 mile/h	-	-
Forward - 1	4.5 mile/h	4.3 mile/h	5 mile/h	-
Forward - 2	8 mile/h	7.4 mile/h	8 mile/h	-
Forward - 4	22.4 mile/h	-	-	-
Reverse - 2	8 mile/h	8.1 mile/h	8 mile/h	-
Reverse - 1	4.5 mile/h	4.7 mile/h	5 mile/h	-
Transmission Type	-	Cat Planetary Powershift	Cat planetary power shift	Cat switched reluctance electric drive
Direct Drive - Forward 1	-	Disabled	Lock-up disabled	-
Direct Drive - Forward 2	-	8 mile/h	8 mile/h	-
Direct Drive - Forward 3	-	14 mile/h	14 mile/h	-
Direct Drive - Reverse 1	-	5 mile/h	Lock-up disabled	-
Direct Drive - Reverse 2	-	8.8 mile/h	9 mile/h	-
Direct Drive - Reverse 3	-	15.3 mile/h	16 mile/h	-
Direct Drive - Forward 4	-	-	24 mile/h	-
Direct Drive - Reverse 4	-	-	25.4 mile/h	-
Forward 1 (virtual)	-	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	-	7 mile/h
Forward 3 (virtual)	-	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	-	20 mile/h
Reverse 1 (virtual)	-	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	-	7 mile/h
Reverse 3 (virtual)	-	-	-	17.5 mile/h
Hydraulic System
Hydraulic Cycle Time - Total Cycle Time	9.4 s	-	-	-
Steering System - Pump Type	Piston	-	-	-
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min)	4047 psi	-	-	-
Implement System - Maximum Pump Output at 2,390 rpm	68 gal/min	-	-	-
Service Refill Capacities
DEF Tank	4.2 gal (US)	-	-	-
Transmission	11.9 gal (US)	51.5 gal (US)	20 gal (US)	16 gal (US)
Fuel Tank Size	76.6 gal (US)	-	-	-
Cooling System	13.2 gal (US)	-	27 gal (US)	-
Differential - Final Drives - Rear	10 gal (US)	96.4 gal (US)	45 gal (US)	49 gal (US)
Differential - Final Drives - Front	10.6 gal (US)	96.4 gal (US)	49 gal (US)	49 gal (US)
Crankcase	4.8 gal (US)	31.7 gal (US)	-	-
Hydraulic Tank	29.6 gal (US)	-	-	-
Fuel Tank	-	385.7 gal (US)	141 gal (US)	147 gal (US)
Cooling Systems	-	59.4 gal (US)	-	-
Hydraulic System Factory Fill (Implement)	-	104.1 gal (US)	-	-
Hydraulic Tank - Implement	-	60.2 gal (US)	-	-
Hydraulic Factory Fill (Steering)	-	32.5 gal (US)	-	-
Hydraulic Tank (Steering Tank Only)	-	26.3 gal (US)	-	-
Engine Crankcase	-	-	9 gal (US)	16 gal (US)
Diesel Exhaust Fluid Tank	-	-	5.5 gal (US)	8.7 gal (US)
Note	-	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a	All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Cooling System - Jacket Water	-	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	-	8 gal (US)
Hydraulic System - Implement/Steering	-	-	-	126 gal (US)
Engine - Tier 4 Final/Stage IV
Emissions	Tier 4/Stage IV	-	-	-
Operating Specifications
Operating Weight	-	233430 lb	116858 lb	116362 lb
Rated Payload - Standard	-	25.5 ton (US)	-	-
Rated Payload - Standard (Material Handler)	-	30 ton (US)	-	-
Rated Payload - High Lift	-	22.5 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	-	27 ton (US)	-	-
Bucket Capacity Range	-	11.5-24.5 m³ (15-32 yd³)	6.4-7.6 m3 (8.3-10 yd3)	4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - Standard	-	775/777	-	-
Cat Truck Match - High Lift	-	785	772/773/775	-
Rated Payload - Quarry Face	-	-	12.5 ton (US)	-
Operating Weight - Standard	-	-	-	116362 lb
Operating Weight - High Lift	-	-	-	119618 lb
Rated Payload - Standard (Quarry Face)	-	-	-	12.5 ton (US)
Rated Payload - Loose Material (Standard)	-	-	-	16 ton (US)
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Positive Flow Control	EH - Load Sense	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	-	Variable Displacement Piston	-	Variable displacement piston
Maximum Flow at 2,165 rpm	-	250 gal/min	159 gal/min	-
Relief Valve Setting - Lift/Tilt	-	5000 psi	4598 psi	4757 psi
Lift Cylinder - Bore	-	9.3 in	-	8.7 in
Lift Cylinder - Stroke	-	63.5 in	-	41.3 in
Tilt Cylinder - Bore	-	11.5 in	-	8.7 in
Tilt Cylinder - Stroke	-	41.5 in	27 in	27 in
Lift/Tilt System	-	-	2X x 145 cc Variable displacement piston	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	190 mm x 1216 mm (7.5 in x 48 in)	-
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	170 mm x 722 mm (6.7 in x 28.4 in)	-
Pilot System	-	-	Variable displacement piston	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	153 gal/min
Hydraulic Cycle Times
Rack Back	-	2.3 s	3.8 s	4.5 s
Rack Back - High Lift	-	2.3 s	-	-
Raise	-	9 s	7.5 s	8 s
Raise - High Lift	-	9 s	-	-
Dump	-	2.6 s	3 s	2.2 s
Dump - High Lift	-	2.6 s	-	-
Float Down	-	3.2 s	-	-
Float Down - High Lift	-	3.2 s	-	-
Total Hydraulic Cycle Time	-	17.1 s	-	18.2 s
Lower Float Down	-	-	4.6 s	3.5 s
Total Hydraulic Cycle Time - Empty Bucket	-	-	18.9 s	-
Axles
Front	-	Fixed	Fixed	Fixed
Rear	-	Trunnion	Trunnion	Trunnion
Oscillation Angle	-	±9°	+/-12.5°	13°
Brakes
Brakes	-	ISO 3450:2011	ISO 3450:2011	ISO 3450:2011
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, Load Sensing	Pilot, load sensing	Pilot, load sensing
Steering System - Pump	-	Piston, Variable Displacement	Piston, variable displacement	Piston, variable displacement
Maximum Flow at 1,400-1,850 rpm	-	70 gal/min	-	-
Steering Cut Off Pressure	-	4500 psi	-	4351 psi
Total Steering Angle	-	80°	70°	86°
Steering Cycle Times - Low Idle	-	4.9 s	5.2 s	5.6 s
Steering Cycle Times - High Idle	-	3.1 s	3 s	3.4 s
Maximum Flow	-	-	52 gal (US)	-
Relief Valve Setting - Steering	-	-	4000 psi	-
Maximum Flow at 1,400-1,600 rpm	-	-	-	71.3 gal/min
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	131 °F	-	-
Sound Performance - Standard
Note	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-
Sound Performance - Suppression
Note	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	-	17 ft	-	-
Ground to Top of ROPS	-	18.3 ft	-	-
Ground to Top of Hood	-	13.1 ft	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-
Reach - Maximum Lift	-	8.2 ft	-	-
Clearance at Maximum Lift	-	15.2 ft	-	-
B-Pin Height - Maximum Lift	-	22.8 ft	-	-
Maximum Overall Height - Bucket Raised	-	30.8 ft	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-
Tread Width	-	10.83 ft	-	-
Rack Back Angle - Maximum Lift	-	56.9 degrees	-	-
Dump Angle at Maximum Lift	-	-49.5 degrees	-	-
Rack Back Angle - Ground Level	-	40.2 degrees	-	-
Width - Over Tires - With Bulge	-	14.74 ft	-	-
Rack Back Angle - Carry	-	48.9 degrees	-	-
Wheel Base	-	19.3 ft	-	-
Maximum Overall Length	-	50.8 ft	-	-
Front Axle Centerline to Bucket Tip	-	18 ft	-	-
Dimensions - High Lift - Approximate
Tread Width	-	10.83 ft	-	-
Rack Back Angle - Ground Level	-	42.5 degrees	-	-
Dump Angle at Maximum Lift	-	-48.1 degrees	-	-
Rack Back Angle - Maximum Lift	-	56.2 degrees	-	-
Width - Over Tires - With Bulge	-	14.75 ft	-	-
Rack Back Angle - Carry	-	51.6 degrees	-	-
Ground to Top of Exhaust Stacks	-	17 ft	-	-
Ground to Top of ROPS	-	18.3 ft	-	-
Ground to Top of Hood	-	13.1 ft	-	-
Ground to Center of Front Axle	-	4.3 ft	-	-
Ground to Bumper Clearance	-	3.8 ft	-	-
Ground to Lower Hitch Clearance	-	2.2 ft	-	-
Reach - Maximum Lift	-	7.6 ft	-	-
Clearance at Maximum Lift	-	17.2 ft	-	-
B-Pin Height - Maximum Lift	-	24.5 ft	-	-
Maximum Overall Height - Bucket Raised	-	32 ft	-	-
Rear Axle - Centerline to Bumper	-	13.5 ft	-	-
Wheel Base	-	19.3 ft	-	-
Maximum Overall Length	-	51.6 ft	-	-
Front Axle Centerline to Bucket Tip	-	18.8 ft	-	-
Air Conditioning System
Air Conditioning	-	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Operator's Cab
ROPS/FOPS	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)	-	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	-	110 dB(A)	-
Note (1)	-	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (2)	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Note (3)	-	-	The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	13.5 ft	13.8 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft	14.8 ft
Ground to Top of Hood	-	-	10.7 ft	10.9 ft
Rear Axle - Centerline to Bumper	-	-	10.3 ft	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	15.7 ft	15.3 ft
Wheel Base	-	-	12.5 ft	14.9 ft
Maximum Overall Length	-	-	39.5 ft	40.7 ft
Ground to Lower Hitch Clearance	-	-	1.5 ft	1.9 ft
Clearance at Maximum Lift	-	-	12 ft	13.3 ft
B-Pin Height - Maximum Lift	-	-	18.7 ft	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	25 ft	25.8 ft
Reach - Maximum Lift	-	-	7.7 ft	6.8 ft
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Ground to Bumper Clearance	-	-	-	3.1 ft
Ground to Center of Axles	-	-	-	3.2 ft
Sustainability
Recyclability	-	-	96%	96%
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	109 dB(A)
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	110 dB(A)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	14.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	-	14 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Axles	-	-	-	3.2 ft
Clearance at Maximum Lift	-	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	-	24.5 ft
Reach - Maximum Lift	-	-	-	6.5 ft
Note	-	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	-	13.8 ft
Ground to Top of Hood	-	-	-	10.9 ft
Ground to Bumper Clearance	-	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	-	16.5 ft
Wheel Base	-	-	-	14.9 ft
Maximum Overall Length	-	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	-	1.9 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Fork Height with Level Arms	-	-	-	8.1 ft
Fork Top Clamp Opening	-	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-	-39.4 °

Compare Equipment Go Back

950 GC Wheel Loader | Front Loader

992 Wheel Loader

988 GC Wheel Loader

988 XE Wheel Loader

Engine

Weights

Buckets

Sound

Dimensions

Weights and Operating Specifications

Transmission

Hydraulic System

Service Refill Capacities

Engine - Tier 4 Final/Stage IV

Operating Specifications

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Axles

Brakes

Hydraulic System - Steering

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Air Conditioning System

Operator's Cab

Sound Performance - Tier 4 Final/EU Stage V - Standard

Dimensions (Approximate) - High Lift

Sustainability

Sound Performance - Tier 4 Final / Stage V - Standard

Sound Performance - Tier 3 / Stage III - Standard

Dimensions (Approximate) - Standard Lift

Dimensions - Millyard Linkage

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us