CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    938M Waste Handler Small Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    986 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 188 HP - -
    Bore 4 in 6.7 in 5.4 in
    Stroke 5 in 8.5 in 6.75 in
    Displacement 427 in³ 4766 in³ 927 in²
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min - -
    Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. -
    Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 649 ft·lbf - -
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 664 ft·lbf - -
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min - -
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 173 HP - -
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 642 ft·lbf - -
    Engine Model Cat® C7.1 Cat® 3516E C15 Cat®
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 627 ft·lbf - -
    Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. The gross power advertised is with the fan at maximum speed. -
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 188 HP - -
    Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
    Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. The power ratings apply when tested under the reference conditions for the specified standard. -
    Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 650 ft·lbf - -
    Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 628 ft·lbf - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 186 HP - -
    Engine Power - ISO 14396 188 HP 1847 HP 449 HP
    Engine Power - ISO 14396 - Metric 190 HP - -
    Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) 190 HP - -
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 184 HP - -
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 183 HP - -
    Net Power (Standard Power Mode: Range 1-3*) 1600 r/min - -
    Net Power (Performance Power Mode: Range 1-4) 1800 r/min - -
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) 176 HP - -
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 170 HP - -
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 170 HP - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 172 HP - -
    Gross Power - SAE J1995 - 1870 HP -
    Net Power - SAE J1349 - Standard Ambient - 1739 HP -
    Net Power - SAE J1349 - High Ambient - 1696 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft 1778 lb/ft
    Torque Rise - 39% 16%
    Peak Power Speed - - 1600
    Peak Power Speed - Gross - SAE J1995 - - 456 HP
    Net Power - SAE J1349 - - 373 HP
    Rated Speed - - 2000
    Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 HP
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - - 378 HP
    Rated Speed - 2,000 rpm - ISO 9249 - - 373 HP
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - - 378 HP

    Weights
    Operating Weight 41794 lb - -
    Operating Weight (1) 17 258 kg (38,046 lb)** - -
    Operating Weight (2) 18 958 kg (41,794 lb)^ - -
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. - -
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. - -

    Buckets
    Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3) - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 LEVEL II - -
    Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A) - -
    Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl - -
    Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A) - -

    Operating Specifications
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. - -
    Full Turn Tip Load (1) 9795 kg (21,594 lb)** - -
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. - -
    Full Turn Tip Load (2) 10 741 kg (23,679 lb)^ - -
    Operating Weight - Standard - 543772 lb 97785 lb
    Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) 5-10,3 m³ (6,5-13,5 yd.³)
    Operating Weight - High Lift - 547675 lb 104005 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
    Cat Truck Match - Standard - 785/789 770/735/740/745
    Cat Truck Match - High Lift - 789/793/794 772/773
    Rated Payload - Standard (Quarry Face) - - 11 ton (US)
    Rated Payload - Loose Material (Standard) - - 14 ton (US)
    Rated Payload - High Lift (Quarry Face) - - 11 ton (US)
    Rated Payload - Loose Material (High Lift) - - 12.1 ton (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Loader Hydraulic System
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4351 psi - -
    Relief Pressure - Tilt Cylinder 4351 psi - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061 psi - -
    Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. - -
    Maximum Flow - Implement Pump 50 gal/min - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds - -
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.7/10.6 seconds - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds - -
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50 gal/min - -
    Lift Cylinder: Standard Lift Linkage - Stroke 31.1 in - -
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter 3.5 in - -
    Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.6 in - -
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.9 in - -
    Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.7 in - -
    Tilt Cylinder: Standard Lift Linkage - Stroke 21.9 in - -

    Steering
    Maximum Steering Torque - 0° (Straight Machine) 42506 ft·lbf - -
    Maximum Steering Torque - 40° (Full Turn) 31398 ft·lbf - -
    Maximum Working Pressure - Steering Pump 3500 psi - -
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.3 s - -
    Steering Cylinder, Double Acting - Bore Diameter 3.1 in - -
    Steering Cylinder, Double Acting - Stroke 15.7 in - -
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 3.1 s - -
    Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. - -
    Steering Cylinder, Double Acting - Rod Diameter 2 in - -
    Maximum Flow - Steering Pump 34 gal/min - -
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -

    Transmission
    Forward and Reverse - Range 2 8 mile/h - -
    Forward and Reverse - Range 4 25 mile/h - -
    Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). Travel speeds based on 58/85-57 tires. -
    Forward and Reverse - Range 3 17 mile/h - -
    Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) - -
    Transmission Type - Cat Planetary Power Shift Cat planetary power shift
    Forward - 1 - 4.6 mile/h 5 mile/h
    Forward - 2 - 8 mile/h 8 mile/h
    Forward - 3 - 13.6 mile/h -
    Reverse - 1 - 5 mile/h 5 mile/h
    Reverse - 2 - 8.8 mile/h 8 mile/h
    Reverse - 3 - 14.9 mile/h -
    Direct Drive - Forward 1 - Lock-up disables -
    Direct Drive - Forward 2 - 8.7 mile/h 8 mile/h
    Direct Drive - Forward 3 - 15.2 mile/h 14 mile/h
    Direct Drive - Reverse 1 - Lock-up disables -
    Direct Drive - Reverse 2 - 9.6 mile/h 9 mile/h
    Direct Drive - Reverse 3 - 16.8 mile/h 16 mile/h
    Direct Drive - Forward 4 - - 24 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h

    Power Train
    Front Axle - Traction Aid Locking differential - -
    Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. - -
    Rear Axle Oscillating - -
    Note (3) Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M. - -
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees - -
    Rear Axle - Traction Aid - Optional Limited slip differential - -
    Rear Axle - Oscillation Angle by Tire Size - 23.5 R25 ± 7 degrees - -
    Brakes - Service Inboard wet disc - -
    Note (2) Offset rims available to meet European roading requirements. - -
    Brakes - Parking Spring applied hydraulically released - -
    Front Axle Fixed - -
    Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder ± 7 degrees - -

    Sustainability
    Recyclability 94% - -

    Service Refill Capacities
    Axles - Rear 9.2 gal (US) - -
    Fuel Tank 51.5 gal (US) - 141 gal (US)
    Axles - Front 9.2 gal (US) - -
    Transmission - Gear Box 2.9 gal (US) - -
    Hydraulic System - Including Tank 44.9 gal (US) - -
    Engine Crankcase 5.3 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US) - -
    Cooling System 8.5 gal (US) - -
    Hydraulic Tank 23.8 gal (US) - -
    Fuel Tank - Short Lift - - 127 gal (US)
    Cooling Systems - - 26 gal (US)
    Crankcase - - 9 gal (US)
    Diesel Exhaust Fluid Tank - - 6 gal (US)
    Transmission - - 20 gal (US)
    Axle Oil - Differentials and Final Drives - Front - - 49 gal (US)
    Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US)
    Hydraulic System Factory Fill - - 87 gal (US)
    Hydraulic System - Tank Only - - 34 gal (US)

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) -
    Cooling System - 138 gal (US) -
    Engine Crankcase - 76 gal (US) -
    Transmission - 110 gal (US) -
    Differential - Final Drives - Front - 220 gal (US) -
    Differential - Final Drives - Rear - 200 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) -
    Hydraulic Tank - Steering and Braking - 100 gal (US) -
    Oil Renewal System (ORS)* - 20 gal (US) -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - 9° ±12.5°
    Oscillation Angle - Chain Arrangement - - ±8.5°

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Load Sense
    Steering System - Pump - Piston, Variable Displacement Piston, variable displacement
    Total Steering Angle - 80 degrees 70°
    Steering Cycle Times - Low Idle - 7.6 s -
    Steering Cycle Times - High Idle - 4.3 s -
    Maximum Flow at 1,400 rpm - - 52 gal/min
    Steering Cut Off Pressure - - 4000 psi

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft -
    Clearance at Maximum Lift - 19.8 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 21.9 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 39.3 ft -
    Maximum Overall Length - 64.6 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.5 degrees -
    Rack Back Angle - Carry - 47.7 degrees -
    Rack Back Angle - Ground Level - 39.7 degrees -
    Reach - Maximum Lift - 9.6 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft -
    Clearance at Maximum Lift - 22.6 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 24.2 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 42.1 ft -
    Maximum Overall Length - 66.9 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.4 degrees -
    Rack Back Angle - Carry - 53.5 degrees -
    Rack Back Angle - Ground Level - 45 degrees -
    Reach - Maximum Lift - 9.4 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Load Sense
    Lift/Tilt System - Pump - Variable Displacement Piston 2 × 110 cc variable displacement
    Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min -
    Relief Valve Setting - Lift/Tilt - 5004 psi 4050 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) -
    Pilot System - Open Loop and Pressure Reducing -
    Maximum Flow at 2,165 rpm - - 123 gal/min
    Lift Cylinder - Bore - - 7.5 in
    Lift Cylinder - Stroke - - 45 in
    Tilt Cylinder - Bore - - 6.7 in
    Tilt Cylinder - Stroke - - 28.4 in

    Hydraulic Cycle Times
    Rack Back - 4.9 s 4.5 s
    Raise - 12.6 s 9 s
    Dump - 3.1 s 3.5 s
    Lower Float Down - 4.2 s 4.3 s
    Lower - - 5.2 s
    Total Hydraulic Cycle Time - - 21.3 s

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.1 ft
    Clearance at Maximum Lift - - 10.1 ft
    B-Pin Height - Maximum Lift - - 16.1 ft
    Maximum Overall Height - Bucket Raised - - 22.4 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 36.6 ft
    Front Axle Centerline to Bucket Tip - - 13.8 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.4 ft
    Clearance at Maximum Lift - - 11.6 ft
    B-Pin Height - Maximum Lift - - 17.6 ft
    Maximum Overall Height - Bucket Raised - - 23.9 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 38 ft
    Front Axle Centerline to Bucket Tip - - 15.3 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach at Maximum Lift - - 8 ft
    Clearance at Maximum Lift - - 10.7 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Maximum Overall Height, Bucket Raised - - 20.9 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35 ft
    Front Axle Centerline to Bucket Tip - - 12.2 ft

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35.4 ft
    Front Axle Centerline to Bucket Tip - - 12.6 ft
    Add a Similar Product: