Compare

Compare Equipment Go Back

Engine
	930M Waste Handler Small Wheel Loader View Product	986 Wheel Loader View Product Remove	988 XE Wheel Loader View Product Remove
Maximum Gross Power	168 HP	-	-
Bore	4 in	5.4 in	5.7 in
Stroke	5 in	6.75 in	7.2 in
Displacement	427 in³	927 in²	1105 in³
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)	170 HP	-	-
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	163 HP	-	-
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	164 HP	-	-
Engine Power - ISO 14396 - Metric	170 HP	-	-
Engine Power - ISO 14396	168 HP	449 HP	-
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)	162 HP	-	-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158 HP	-	-
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 HP	-	-
Net Power (Standard Power Mode: Range 1-3*)	1600 r/min	-	-
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 HP	-	-
Net Power (Performance Power Mode: Range 1-4)	1800 r/min	-	-
Note (3)	No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.	-	-
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)	168 HP	-	-
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)	1800 r/min	-	-
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	601 ft·lbf	-	-
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)	1600 r/min	-	-
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	586 ft·lbf	-	-
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)	160 HP	-	-
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)	588 ft·lbf	-	-
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	573 ft·lbf	-	-
Emissions	The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
Engine Model	Cat® C7.1	C15 Cat®	Cat® C18 ™
Note (1)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.	-	-
Note (2)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.	-	-
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)	572 ft·lbf	-	-
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)	587 ft·lbf	-	-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166 HP	-	-
Peak Power Speed	-	1600	1,500 rpm
Peak Power Speed - Gross - SAE J1995	-	456 HP	-
Net Power - SAE J1349	-	373 HP	538 HP
Rated Speed	-	2000	1,700 rpm
Rated Speed - 2,000 rpm - EEC 80/1269	-	373 HP	-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)	-	378 HP	-
Rated Speed - 2,000 rpm - ISO 9249	-	373 HP	-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)	-	378 HP	-
Peak Torque - 1,200 rpm - SAE J1995	-	1778 lb/ft	2230 ft·lbf
Torque Rise	-	16%	58%
Engine Power - ISO 14396:2002	-	-	580 HP
Gross Power - SAE J1995:2014	-	-	588 HP
Weights
Operating Weight	37713 lb	-	-
Note (2)	^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.	-	-
Note (1)	**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.	-	-
Operating Weight (1)	15 381 kg (33,908 lb)**	-	-
Operating Weight (2)	17 107 kg (37,713 lb)^	-	-
Buckets
Bucket Capacities	3.0-5.0 m3 (3.9-6.5 yd3)	-	4.7-13 m3 (6.2-17 yd3)
Cab
ROPS	ISO 3471:2008	-	-
FOPS	ISO 3449:2005 LEVEL II	-	-
Note (1)	* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl	-	-
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*	68 dB(A)	-	-
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*	101 dB(A)	-	-
Loader Hydraulic System
Lift Cylinder: Standard Lift Linkage - Stroke	28.7 in	-	-
Tilt Cylinder: Standard Lift Linkage - Bore Diameter	5.9 in	-	-
Lift Cylinder: Standard Lift Linkage - Bore Diameter	4.7 in	-	-
Lift Cylinder: Standard Lift Linkage - Rod Diameter	2.6 in	-	-
Tilt Cylinder: Standard Lift Linkage - Rod Diameter	3.5 in	-	-
Tilt Cylinder: Standard Lift Linkage - Stroke	21.9 in	-	-
Maximum Flow - Implement Pump	50 gal/min	-	-
Maximum Working Pressure - Implement Pump	3771 psi	-	-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)	5.1/5.7 seconds	-	-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	4061 psi	-	-
Note (1)	Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.	-	-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)	1.5/1.7 seconds	-	-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)	2.7/2.7 seconds	-	-
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).	-	-
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gal/min	-	-
Note (3)	* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.	-	-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4061 psi	-	-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time	9.3/10.1 seconds	-	-
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gal/min	-	-
Relief Pressure - Tilt Cylinder	4061 psi	-	-
Service Refill Capacities
Axles - Front	6.9 gal (US)	-	-
Cooling System	7.9 gal (US)	-	-
Engine Crankcase	5.3 gal (US)	-	16 gal (US)
Hydraulic Tank	23.8 gal (US)	-	-
Transmission - Gear Box	2.2 gal (US)	-	-
Fuel Tank	51.5 gal (US)	141 gal (US)	147 gal (US)
Hydraulic System - Including Tank	43.6 gal (US)	-	-
Axles - Rear	6.6 gal (US)	-	-
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)	-	-
Fuel Tank - Short Lift	-	127 gal (US)	-
Cooling Systems	-	26 gal (US)	-
Crankcase	-	9 gal (US)	-
Diesel Exhaust Fluid Tank	-	6 gal (US)	8.7 gal (US)
Transmission	-	20 gal (US)	16 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	49 gal (US)	-
Axle Oil - Differentials and Final Drives - Rear	-	45 gal (US)	-
Hydraulic System Factory Fill	-	87 gal (US)	-
Hydraulic System - Tank Only	-	34 gal (US)	-
Cooling System - Jacket Water	-	-	30 gal (US)
Cooling Systems - Power Train	-	-	8 gal (US)
Differential - Final Drives - Front	-	-	49 gal (US)
Differential - Final Drives - Rear	-	-	49 gal (US)
Hydraulic System - Implement/Steering	-	-	126 gal (US)
Note	-	-	All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
Operating Specifications
Note (2)	^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.	-	-
Note (1)	**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.	-	-
Full Turn Tip Load (2)	9525 kg (20,998 lb)^	-	-
Full Turn Tip Load (1)	8573 kg (18,900 lb)**	-	-
Operating Weight - Standard	-	97785 lb	116362 lb
Operating Weight - High Lift	-	104005 lb	119618 lb
Rated Payload - Standard (Quarry Face)	-	11 ton (US)	12.5 ton (US)
Rated Payload - Loose Material (Standard)	-	14 ton (US)	16 ton (US)
Rated Payload - High Lift (Quarry Face)	-	11 ton (US)	-
Rated Payload - Loose Material (High Lift)	-	12.1 ton (US)	-
Bucket Capacity Range	-	5-10,3 m³ (6,5-13,5 yd.³)	4.7-13 m3 (6.2-17 yd3)
Cat Truck Match - Standard	-	770/735/740/745	-
Cat Truck Match - High Lift	-	772/773	-
Operating Weight	-	-	116362 lb
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Steering
Steering Cylinder, Double Acting - Bore Diameter	2.8 in	-	-
Steering Cylinder, Double Acting - Rod Diameter	1.6 in	-	-
Maximum Steering Torque - 0° (Straight Machine)	37155 ft·lbf	-	-
Steering Cylinder, Double Acting - Stroke	17.2 in	-	-
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed	2.4 s	-	-
Maximum Working Pressure - Steering Pump	3500 psi	-	-
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited	2.8 s	-	-
Maximum Steering Torque - 40° (Full Turn)	27747 ft·lbf	-	-
Note (1)	Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.	-	-
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).	-	-
Maximum Flow - Steering Pump	34 gal/min	-	-
Transmission
Forward and Reverse - Range 4	25 mile/h	-	-
Forward and Reverse - Range 3	17 mile/h	-	-
Forward and Reverse - Range 2	8 mile/h	-	-
Note	*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).	-	-
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)	-	-
Transmission Type	-	Cat planetary power shift	Cat switched reluctance electric drive
Forward - 1	-	5 mile/h	-
Forward - 2	-	8 mile/h	-
Direct Drive - Forward 2	-	8 mile/h	-
Direct Drive - Forward 3	-	14 mile/h	-
Direct Drive - Forward 4	-	24 mile/h	-
Reverse - 1	-	5 mile/h	-
Reverse - 2	-	8 mile/h	-
Direct Drive - Reverse 2	-	9 mile/h	-
Direct Drive - Reverse 3	-	16 mile/h	-
Direct Drive - Reverse 4	-	25.4 mile/h	-
Forward 1 (virtual)	-	-	4.3 mile/h
Forward 2 (virtual)	-	-	7 mile/h
Forward 3 (virtual)	-	-	13.8 mile/h
Forward 4 (virtual)	-	-	20 mile/h
Reverse 1 (virtual)	-	-	4.3 mile/h
Reverse 2 (virtual)	-	-	7 mile/h
Reverse 3 (virtual)	-	-	17.5 mile/h
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65	± 10.5 degrees	-	-
Note (3)	Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.	-	-
Note (2)	Offset rims available to meet European roading requirements.	-	-
Rear Axle	Oscillating	-	-
Front Axle	Fixed	-	-
Brakes - Parking	Spring applied hydraulically released	-	-
Note (1)	Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.	-	-
Front Axle - Traction Aid	Locking differential	-	-
Rear Axle - Traction Aid - Optional	Limited slip differential	-	-
Brakes - Service	Inboard wet disc	-	-
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder	± 7 degrees	-	-
Sustainability
Recyclability	94%	-	96%
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Load Sense	EH-Positive Flow Control, Flow Sharing
Lift/Tilt System - Pump	-	2 × 110 cc variable displacement	Variable displacement piston
Maximum Flow at 2,165 rpm	-	123 gal/min	-
Relief Valve Setting - Lift/Tilt	-	4050 psi	4757 psi
Lift Cylinder - Bore	-	7.5 in	8.7 in
Lift Cylinder - Stroke	-	45 in	41.3 in
Tilt Cylinder - Bore	-	6.7 in	8.7 in
Tilt Cylinder - Stroke	-	28.4 in	27 in
Maximum Flow at 1,400-1,600 rpm	-	-	153 gal/min
Hydraulic Cycle Times
Rack Back	-	4.5 s	4.5 s
Raise	-	9 s	8 s
Dump	-	3.5 s	2.2 s
Lower	-	5.2 s	-
Lower Float Down	-	4.3 s	3.5 s
Total Hydraulic Cycle Time	-	21.3 s	18.2 s
Hydraulic System - Steering
Steering System - Circuit	-	Load Sense	Pilot, load sensing
Steering System - Pump	-	Piston, variable displacement	Piston, variable displacement
Maximum Flow at 1,400 rpm	-	52 gal/min	-
Steering Cut Off Pressure	-	4000 psi	4351 psi
Total Steering Angle	-	70°	86°
Maximum Flow at 1,400-1,600 rpm	-	-	71.3 gal/min
Steering Cycle Times - High Idle	-	-	3.4 s
Steering Cycle Times - Low Idle	-	-	5.6 s
Axles
Front	-	Fixed	Fixed
Rear	-	Trunnion	Trunnion
Oscillation Angle	-	±12.5°	13°
Oscillation Angle - Chain Arrangement	-	±8.5°	-
Brakes
Brakes	-	ISO 3450:2011	ISO 3450:2011
Operator's Cab
ROPS/FOPS	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Standard
Operator Sound Level (ISO 6396)	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	112 dB(A)	-
Note	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396)	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	110 dB(A)	-
Note	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	13.3 ft	-
Ground to Top of Hood	-	10.7 ft	-
Ground to Center of Front Axle	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	1.5 ft	-
Reach - Maximum Lift	-	7.1 ft	-
Clearance at Maximum Lift	-	10.1 ft	-
B-Pin Height - Maximum Lift	-	16.1 ft	-
Maximum Overall Height - Bucket Raised	-	22.4 ft	-
Rear Axle - Centerline to Bumper	-	10.3 ft	-
Wheel Base	-	12.5 ft	-
Maximum Overall Length	-	36.6 ft	-
Front Axle Centerline to Bucket Tip	-	13.8 ft	-
Note	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	13.3 ft	-
Ground to Top of Hood	-	10.7 ft	-
Ground to Center of Front Axle	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	1.5 ft	-
Reach - Maximum Lift	-	7.4 ft	-
Clearance at Maximum Lift	-	11.6 ft	-
B-Pin Height - Maximum Lift	-	17.6 ft	-
Maximum Overall Height - Bucket Raised	-	23.9 ft	-
Rear Axle - Centerline to Bumper	-	10.3 ft	-
Wheel Base	-	12.5 ft	-
Maximum Overall Length	-	38 ft	-
Front Axle Centerline to Bucket Tip	-	15.3 ft	-
Note	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	13.3 ft	-
Ground to Top of Hood	-	10.7 ft	-
Ground to Center of Rear Axle	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	1.5 ft	-
Reach at Maximum Lift	-	8 ft	-
Clearance at Maximum Lift	-	10.7 ft	-
B-Pin Height at Maximum Lift	-	15 ft	-
Maximum Overall Height, Bucket Raised	-	20.9 ft	-
Rear Axle Center Line to Bumper	-	10.3 ft	-
Wheel Base	-	12.5 ft	-
Maximum Overall Length	-	35 ft	-
Front Axle Centerline to Bucket Tip	-	12.2 ft	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	13.3 ft	-
Ground to Top of Hood	-	10.7 ft	-
Ground to Center of Rear Axle	-	3.2 ft	-
Ground to Fuel Tank Clearance	-	2.3 ft	-
Ground to Lower Hitch Clearance	-	1.5 ft	-
B-Pin Height at Maximum Lift	-	15 ft	-
Rear Axle Center Line to Bumper	-	10.3 ft	-
Wheel Base	-	12.5 ft	-
Maximum Overall Length	-	35.4 ft	-
Front Axle Centerline to Bucket Tip	-	12.6 ft	-
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	109 dB(A)
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	110 dB(A)
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	14.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	14 ft
Wheel Base	-	-	14.9 ft
Maximum Overall Length	-	-	39.3 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Axles	-	-	3.2 ft
Clearance at Maximum Lift	-	-	11.9 ft
B-Pin Height - Maximum Lift	-	-	18 ft
Maximum Overall Height - Bucket Raised	-	-	24.5 ft
Reach - Maximum Lift	-	-	6.5 ft
Note	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	14.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Bucket Tip	-	-	15.3 ft
Wheel Base	-	-	14.9 ft
Maximum Overall Length	-	-	40.7 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Axles	-	-	3.2 ft
Clearance at Maximum Lift	-	-	13.3 ft
B-Pin Height - Maximum Lift	-	-	19.3 ft
Maximum Overall Height - Bucket Raised	-	-	25.8 ft
Reach - Maximum Lift	-	-	6.8 ft
Note	-	-	Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
Dimensions - Millyard Linkage
Ground to Top of ROPS	-	-	13.8 ft
Ground to Top of Exhaust Stacks	-	-	13.8 ft
Ground to Top of Hood	-	-	10.9 ft
Ground to Bumper Clearance	-	-	3.1 ft
Rear Axle - Centerline to Bumper	-	-	10.5 ft
Front Axle Centerline to Fork Tip	-	-	16.5 ft
Wheel Base	-	-	14.9 ft
Maximum Overall Length	-	-	41.9 ft
Ground to Lower Hitch Clearance	-	-	1.9 ft
Ground to Center of Front Axle	-	-	3.2 ft
Fork Height with Level Arms	-	-	8.1 ft
Fork Top Clamp Opening	-	-	13.1 ft
Fork Height at Maximum Lift	-	-	17.2 ft
Hinge Pin Height at Maximum Lift	-	-	16.1 ft
Dump Angle at Maximum Lift	-	-	-39.4 °

Compare Equipment Go Back

930M Waste Handler Small Wheel Loader

986 Wheel Loader

988 XE Wheel Loader

Engine

Weights

Buckets

Cab

Loader Hydraulic System

Service Refill Capacities

Operating Specifications

Air Conditioning System

Steering

Transmission

Power Train

Sustainability

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Axles

Brakes

Operator's Cab

Sound Performance - Standard

Sound Performance - Suppression

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Sound Performance - Tier 4 Final / Stage V - Standard

Sound Performance - Tier 3 / Stage III - Standard

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Dimensions - Millyard Linkage

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us