CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    930M Waste Handler Small Wheel Loader
    View Product
    992 Wheel Loader
    View Product Remove
    982
    View Product Remove

    Engine
    Maximum Gross Power 168 HP - -
    Bore 4 in 5.7 in -
    Stroke 5 in 6.4 in -
    Displacement 427 in³ 1963.5 in³ -
    Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) 170 HP - -
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 163 HP - -
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 164 HP - -
    Engine Power - ISO 14396 - Metric 170 HP - -
    Engine Power - ISO 14396 168 HP - -
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) 162 HP - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 158 HP - -
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP - -
    Net Power (Standard Power Mode: Range 1-3*) 1600 r/min - -
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP - -
    Net Power (Performance Power Mode: Range 1-4) 1800 r/min - -
    Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP - -
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min - -
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 601 ft·lbf - -
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min - -
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 586 ft·lbf - -
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP - -
    Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 588 ft·lbf - -
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 573 ft·lbf - -
    Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent -
    Engine Model Cat® C7.1 Cat® C32B Cat C13
    Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 572 ft·lbf - -
    Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 587 ft·lbf - -
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 166 HP - -
    Net Power - 814 HP -
    Rated Speed - 1750 rpm -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP -
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 404 HP
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1636 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1620 lb/ft
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1515 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 432 HP
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 436 HP

    Weights
    Operating Weight 37713 lb - 78264 lb
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. - -
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. - -
    Operating Weight (1) 15 381 kg (33,908 lb)** - -
    Operating Weight (2) 17 107 kg (37,713 lb)^ - -
    Note - - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun

    Buckets
    Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3) 11.5-24.5 m³ (15-32 yd³) -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 LEVEL II - -
    Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl - -
    Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A) - -
    Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A) - -

    Loader Hydraulic System
    Lift Cylinder: Standard Lift Linkage - Stroke 28.7 in - -
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.9 in - -
    Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.7 in - -
    Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.6 in - -
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter 3.5 in - -
    Tilt Cylinder: Standard Lift Linkage - Stroke 21.9 in - -
    Maximum Flow - Implement Pump 50 gal/min - -
    Maximum Working Pressure - Implement Pump 3771 psi - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.1/5.7 seconds - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061 psi - -
    Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds - -
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min - -
    Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. - -
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4061 psi - -
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.3/10.1 seconds - -
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50 gal/min - -
    Relief Pressure - Tilt Cylinder 4061 psi - -

    Service Refill Capacities
    Axles - Front 6.9 gal (US) - -
    Cooling System 7.9 gal (US) - 13.7 gal (US)
    Engine Crankcase 5.3 gal (US) - -
    Hydraulic Tank 23.8 gal (US) - 40.4 gal (US)
    Transmission - Gear Box 2.2 gal (US) - -
    Fuel Tank 51.5 gal (US) 385.7 gal (US) 112.5 gal (US)
    Hydraulic System - Including Tank 43.6 gal (US) - -
    Axles - Rear 6.6 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US) - -
    Cooling Systems - 59.4 gal (US) -
    Crankcase - 31.7 gal (US) 9.8 gal (US)
    Transmission - 51.5 gal (US) 20.3 gal (US)
    Differential - Final Drives - Front - 96.4 gal (US) 24.3 gal (US)
    Differential - Final Drives - Rear - 96.4 gal (US) 24.3 gal (US)
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) -
    Hydraulic Tank - Implement - 60.2 gal (US) -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) -
    DEF Tank - - 5.5 gal (US)

    Operating Specifications
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. - For a machine configuration as defined under �Weight.�
    Full Turn Tip Load (2) 9525 kg (20,998 lb)^ - -
    Full Turn Tip Load (1) 8573 kg (18,900 lb)** - -
    Operating Weight - 233430 lb -
    Rated Payload - Standard - 25.5 ton (US) -
    Rated Payload - Standard (Material Handler) - 30 ton (US) -
    Rated Payload - High Lift - 22.5 ton (US) -
    Rated Payload - High Lift (Material Handler) - 27 ton (US) -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) -
    Cat Truck Match - Standard - 775/777 -
    Cat Truck Match - High Lift - 785 -
    Breakout Force - - 59060 lbf
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 22418 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 46526 lb

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Steering
    Steering Cylinder, Double Acting - Bore Diameter 2.8 in - -
    Steering Cylinder, Double Acting - Rod Diameter 1.6 in - -
    Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf - -
    Steering Cylinder, Double Acting - Stroke 17.2 in - -
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s - -
    Maximum Working Pressure - Steering Pump 3500 psi - -
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s - -
    Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf - -
    Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. - -
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). - -
    Maximum Flow - Steering Pump 34 gal/min - -

    Transmission
    Forward and Reverse - Range 4 25 mile/h - -
    Forward and Reverse - Range 3 17 mile/h - -
    Forward and Reverse - Range 2 8 mile/h - -
    Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
    Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) - -
    Transmission Type - Cat Planetary Powershift -
    Forward - 1 - 4.3 mile/h 3.9 mile/h
    Forward - 2 - 7.4 mile/h 7.4 mile/h
    Forward - 3 - 12.7 mile/h 13.1 mile/h
    Direct Drive - Forward 1 - Disabled -
    Direct Drive - Forward 2 - 8 mile/h -
    Direct Drive - Forward 3 - 14 mile/h -
    Reverse - 1 - 4.7 mile/h 4.3 mile/h
    Reverse - 2 - 8.1 mile/h 8.5 mile/h
    Reverse - 3 - 13.9 mile/h 15 mile/h
    Direct Drive - Reverse 1 - 5 mile/h -
    Direct Drive - Reverse 2 - 8.8 mile/h -
    Direct Drive - Reverse 3 - 15.3 mile/h -
    Forward - 4 - - 23.3 mile/h
    Reverse - 4 - - 24.5 mile/h

    Power Train
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees - -
    Note (3) Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. - -
    Note (2) Offset rims available to meet European roading requirements. - -
    Rear Axle Oscillating - -
    Front Axle Fixed - -
    Brakes - Parking Spring applied hydraulically released - -
    Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. - -
    Front Axle - Traction Aid Locking differential - -
    Rear Axle - Traction Aid - Optional Limited slip differential - -
    Brakes - Service Inboard wet disc - -
    Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder ± 7 degrees - -

    Sustainability
    Recyclability 94% - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control -
    Lift/Tilt System - Pump - Variable Displacement Piston -
    Maximum Flow at 2,165 rpm - 250 gal/min -
    Relief Valve Setting - Lift/Tilt - 5000 psi -
    Lift Cylinder - Bore - 9.3 in -
    Lift Cylinder - Stroke - 63.5 in -
    Tilt Cylinder - Bore - 11.5 in -
    Tilt Cylinder - Stroke - 41.5 in -

    Hydraulic Cycle Times
    Rack Back - 2.3 s -
    Rack Back - High Lift - 2.3 s -
    Raise - 9 s -
    Raise - High Lift - 9 s -
    Dump - 2.6 s -
    Dump - High Lift - 2.6 s -
    Float Down - 3.2 s -
    Float Down - High Lift - 3.2 s -
    Total Hydraulic Cycle Time - 17.1 s -

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - ±9° -

    Brakes
    Brakes - ISO 3450:2011 -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing -
    Steering System - Pump - Piston, Variable Displacement -
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min -
    Steering Cut Off Pressure - 4500 psi -
    Total Steering Angle - 80° -
    Steering Cycle Times - Low Idle - 4.9 s -
    Steering Cycle Times - High Idle - 3.1 s -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F -

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) -

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft -
    Ground to Top of ROPS - 18.3 ft -
    Ground to Top of Hood - 13.1 ft -
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft -
    Ground to Lower Hitch Clearance - 2.2 ft -
    Reach - Maximum Lift - 8.2 ft -
    Clearance at Maximum Lift - 15.2 ft -
    B-Pin Height - Maximum Lift - 22.8 ft -
    Maximum Overall Height - Bucket Raised - 30.8 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft -
    Tread Width - 10.83 ft -
    Rack Back Angle - Maximum Lift - 56.9 degrees -
    Dump Angle at Maximum Lift - -49.5 degrees -
    Rack Back Angle - Ground Level - 40.2 degrees -
    Width - Over Tires - With Bulge - 14.74 ft -
    Rack Back Angle - Carry - 48.9 degrees -
    Wheel Base - 19.3 ft -
    Maximum Overall Length - 50.8 ft -
    Front Axle Centerline to Bucket Tip - 18 ft -

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft -
    Rack Back Angle - Ground Level - 42.5 degrees -
    Dump Angle at Maximum Lift - -48.1 degrees -
    Rack Back Angle - Maximum Lift - 56.2 degrees -
    Width - Over Tires - With Bulge - 14.75 ft -
    Rack Back Angle - Carry - 51.6 degrees -
    Ground to Top of Exhaust Stacks - 17 ft -
    Ground to Top of ROPS - 18.3 ft -
    Ground to Top of Hood - 13.1 ft -
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft -
    Ground to Lower Hitch Clearance - 2.2 ft -
    Reach - Maximum Lift - 7.6 ft -
    Clearance at Maximum Lift - 17.2 ft -
    B-Pin Height - Maximum Lift - 24.5 ft -
    Maximum Overall Height - Bucket Raised - 32 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft -
    Wheel Base - 19.3 ft -
    Maximum Overall Length - 51.6 ft -
    Front Axle Centerline to Bucket Tip - 18.8 ft -

    Bucket Capacities
    Bucket Range - - 4.8-17.2 m³ 6.25-22.5 yd³

    Sound
    Note (1) - - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)

    Hydraulic System
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 9.4 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.4 ft
    Height - Top of Exhaust Pipe - - 12.4 ft
    Height - Top of Hood - - 10 ft
    Height - Top of ROPS - - 12.6 ft
    Hinge Pin Height at Carry - - 2.11 ft
    Hinge Pin Height at Maximum Lift - - 16.1 ft
    Lift Arm Clearance at Maximum Lift - - 13.4 ft
    Overall Length - Without Bucket - - 29.11 ft
    Tread Width - - 8.4 ft
    Wheel Base - - 12.6 ft
    Width over Tires (Loaded) - - 11.5 ft

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 428 mm
    Height - Top of Exhaust Pipe - - 3736 mm
    Height - Top of Hood - - 3036 mm
    Height - Top of ROPS - - 3801 mm
    Hinge Pin Height at Carry - - 2.7 ft
    Hinge Pin Height at Maximum Lift - - 4741 mm
    Lift Arm Clearance at Maximum Lift - - 3902 mm
    Overall Length - Without Bucket - - 8597 mm
    Tread Width - - 8.4 ft
    Wheel Base - - 3800 mm
    Width over Tires (Loaded) - - 11.5 ft
    Add a Similar Product: