Compare Equipment Go Back
 930M Aggregate Handler Small Wheel Loader |
 988 GC Wheel Loader |
 980 XE |
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Bore | 4 in | 5.4 in | - |
| Stroke | 5 in | 6.75 in | - |
| Displacement | 427 in³ | 927 in³ | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | - | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 | 168 HP | - | - |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Engine Model | Cat® C7.1 | Cat® C15 | Cat C13 |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | - |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards. |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 HP | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 HP | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 162 HP | - | - |
| Net Power (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Net Power (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Rated Speed | - | 2000 | - |
| Peak Power Speed | - | 1600 | - |
| Engine Power - ISO 14396 | - | 449 HP | - |
| Gross Power - SAE J1995 | - | 456 HP | - |
| Net Power - SAE J1349 | - | 373 HP | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 ft·lbf | - |
| Torque Rise | - | 16% | - |
| Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 | - | - | 393 HP |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | - | - | 1627 lb/ft |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | - | - | 1612 lb/ft |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | - | - | 1539 lb/ft |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | - | - | 420 HP |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | - | - | 425 HP |
Weights |
|||
| Operating Weight | 31848 lb | - | 66877 lb |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - |
| Operating Weight (1) | 14 374 kg (31,689 lb)** | - | - |
| Operating Weight (2) | 14 446 kg (31,848 lb)~ | - | - |
| Note | - | - | Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
Buckets |
|||
| Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) | 6.4-7.6 m3 (8.3-10 yd3) | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| Declared Sound Levels | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- | - |
| FOPS | ISO 3449:2005 LEVEL II | - | - |
| Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - | - |
Loader Hydraulic System |
|||
| Lift Cylinder, Double Acting - Rod Diameter | 2.6 in | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.1/5.7 seconds | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds | - | - |
| Lift Cylinder, Double Acting - Stroke | 28.7 in | - | - |
| Tilt Cylinder, Double Acting - Rod Diameter | 3.5 in | - | - |
| Tilt Cylinder, Double Acting - Stroke | 21.9 in | - | - |
| Lift Cylinder, Double Acting - Bore Diameter | 4.7 in | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.7/2.7 seconds | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Tilt Cylinder, Double Acting - Bore Diameter | 5.9 in | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.3/10.1 seconds | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
Power Train |
|||
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Traction Aid - Optional | Limited slip differential | - | - |
| Front Axle | Fixed | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Note (2) | Offset rims available to meet European roading requirements. | - | - |
| Front Axle - Traction Aid* | Locking differential (standard) | - | - |
| Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. | - | - |
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees | - | - |
| Rear Axle | Oscillating | - | - |
Transmission |
|||
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | - | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Transmission Type | - | Cat planetary power shift | - |
| Forward - 1 | - | 5 mile/h | 4.4 mile/h |
| Forward - 2 | - | 8 mile/h | 8.4 mile/h |
| Reverse - 1 | - | 5 mile/h | 5 mile/h |
| Reverse - 2 | - | 8 mile/h | 9.6 mile/h |
| Direct Drive - Forward 1 | - | Lock-up disabled | - |
| Direct Drive - Forward 2 | - | 8 mile/h | - |
| Direct Drive - Forward 3 | - | 14 mile/h | - |
| Direct Drive - Forward 4 | - | 24 mile/h | - |
| Direct Drive - Reverse 1 | - | Lock-up disabled | - |
| Direct Drive - Reverse 2 | - | 9 mile/h | - |
| Direct Drive - Reverse 3 | - | 16 mile/h | - |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
| Forward - 3 | - | - | 14.9 mile/h |
| Forward - 4 | - | - | 24.5 mile/h |
| Reverse - 3 | - | - | 18.3 mile/h |
Service Refill Capacities |
|||
| Rear Axles | 6.6 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Fuel Tank | 51.5 Gal | 141 gal (US) | 112.5 gal (US) |
| Hydraulic Tank | 23.8 gal (US) | - | 40.4 gal (US) |
| Engine Crankcase | 5.3 gal (US) | 9 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Cooling System | 7.9 gal (US) | 27 gal (US) | 13.7 gal (US) |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Diesel Exhaust Fluid Tank | - | 5.5 gal (US) | - |
| Transmission | - | 20 gal (US) | 20.3 gal (US) |
| Differential - Final Drives - Front | - | 49 gal (US) | 24.3 gal (US) |
| Differential - Final Drives - Rear | - | 45 gal (US) | 24.3 gal (US) |
| Note | - | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - |
| Crankcase | - | - | 9.8 gal (US) |
| DEF Tank | - | - | 5.5 gal (US) |
Steering |
|||
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
Sustainability |
|||
| Recyclability | 94% | 96% | 98% |
Operating Specifications |
|||
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | For a machine configuration as defined under Weight. |
| Full Turn Tip Load (2) | 9302 kg (20,507 lb)~ | - | - |
| Full Turn Tip Load (1) | 9203 kg (20,289 lb)** | - | - |
| Operating Weight | - | 116858 lb | - |
| Rated Payload - Quarry Face | - | 12.5 ton (US) | - |
| Bucket Capacity Range | - | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Cat Truck Match - High Lift | - | 772/773/775 | - |
| Breakout Force | - | - | 51008 lbf |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | - | - | 20965 kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | - | - | 43432 lb |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | EH - Load Sense | - |
| Lift/Tilt System | - | 2X x 145 cc Variable displacement piston | - |
| Maximum Flow at 2,165 rpm | - | 159 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 4598 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | 190 mm x 1216 mm (7.5 in x 48 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | 170 mm x 722 mm (6.7 in x 28.4 in) | - |
| Pilot System | - | Variable displacement piston | - |
| Tilt Cylinder - Stroke | - | 27 in | - |
Hydraulic Cycle Times |
|||
| Rack Back | - | 3.8 s | - |
| Raise | - | 7.5 s | - |
| Dump | - | 3 s | - |
| Lower Float Down | - | 4.6 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 18.9 s | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Pilot, load sensing | - |
| Steering System - Pump | - | Piston, variable displacement | - |
| Maximum Flow | - | 52 gal (US) | - |
| Relief Valve Setting - Steering | - | 4000 psi | - |
| Total Steering Angle | - | 70° | - |
| Steering Cycle Times - High Idle | - | 3 s | - |
| Steering Cycle Times - Low Idle | - | 5.2 s | - |
Axles |
|||
| Front | - | Fixed | - |
| Rear | - | Trunnion | - |
| Oscillation Angle | - | +/-12.5° | - |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | - |
Operator's Cab |
|||
| ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
| Note (1) | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
| Note (2) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
| Note (3) | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
Dimensions (Approximate) - High Lift |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Front Axle Centerline to Bucket Tip | - | 15.7 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 39.5 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Clearance at Maximum Lift | - | 12 ft | - |
| B-Pin Height - Maximum Lift | - | 18.7 ft | - |
| Maximum Overall Height - Bucket Raised | - | 25 ft | - |
| Reach - Maximum Lift | - | 7.7 ft | - |
| Note | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - |
Bucket Capacities |
|||
| Bucket Range | - | - | 4.0-14.5 m³ 5.25-19 yd³ |
Sound |
|||
| Note (1) | - | - | For machines in European Union countries and in countries that adopt the EU Directives. |
| Note (2) | - | - | European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | - | - | 110 |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | - | - | 70 dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | - | - | 107 dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | - | - | 75 |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | - | - | 70 dB(A) |
Hydraulic System |
|||
| Implement System - Maximum Operating Pressure | - | - | 4975 psi |
| Hydraulic Cycle Time - Total | - | - | 10.1 seconds |
Dimensions |
|||
| Note | - | - | All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
Dimensions - High Lift |
|||
| Centerline of Rear Axle to Edge of Counterweight | - | - | 8.9 ft |
| Centerline of Rear Axle to Hitch | - | - | 6.3 ft |
| Ground Clearance | - | - | 1.5 ft |
| Height - Top of Exhaust Pipe | - | - | 12.5 ft |
| Height - Top of Hood | - | - | 10.1 ft |
| Height - Top of ROPS | - | - | 12.7 ft |
| Hinge Pin Height at Carry | - | - | 2.2 ft |
| Hinge Pin Height at Maximum Lift | - | - | 15.7 ft |
| Lift Arm Clearance at Maximum Lift | - | - | 13.6 ft |
| Overall Length - Without Bucket | - | - | 27.5 ft |
| Tread Width | - | - | 8 ft |
| Wheel Base | - | - | 12.6 ft |
| Width over Tires (Loaded) | - | - | 10.9 ft |
Dimensions - Standard Lift |
|||
| Centerline of Rear Axle to Edge of Counterweight | - | - | 8.7 ft |
| Centerline of Rear Axle to Hitch | - | - | 6.3 ft |
| Ground Clearance | - | - | 456 mm |
| Height - Top of Exhaust Pipe | - | - | 3764 mm |
| Height - Top of Hood | - | - | 3064 mm |
| Height - Top of ROPS | - | - | 3829 mm |
| Hinge Pin Height at Carry | - | - | 2 ft |
| Hinge Pin Height at Maximum Lift | - | - | 4554 mm |
| Lift Arm Clearance at Maximum Lift | - | - | 3881 mm |
| Overall Length - Without Bucket | - | - | 8155 mm |
| Tread Width | - | - | 8 ft |
| Wheel Base | - | - | 3800 mm |
| Width over Tires (Loaded) | - | - | 10.9 ft |
