Compare Equipment Go Back
 930M Aggregate Handler Small Wheel Loader |
 982 |
|
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Bore | 4 in | - | - |
| Stroke | 5 in | - | - |
| Displacement | 427 in³ | - | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 | 168 HP | - | - |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Engine Model | Cat® C7.1 | Cat C13 | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | - | - |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 HP | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 HP | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 162 HP | - | - |
| Net Power (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Net Power (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 | - | 404 HP | - |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | - | 1636 lb/ft | - |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | - | 1620 lb/ft | - |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | - | 1515 lb/ft | - |
| Engine Power @ 1,700 rpm – ISO 14396:2002 | - | 432 HP | - |
| Gross Power @ 1,700 rpm – SAE J1995:2014 | - | 436 HP | - |
Weights |
|||
| Operating Weight | 31848 lb | 78264 lb | - |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - |
| Operating Weight (1) | 14 374 kg (31,689 lb)** | - | - |
| Operating Weight (2) | 14 446 kg (31,848 lb)~ | - | - |
| Note | - | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun | - |
Buckets |
|||
| Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| Declared Sound Levels | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- | - |
| FOPS | ISO 3449:2005 LEVEL II | - | - |
| Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - | - |
Loader Hydraulic System |
|||
| Lift Cylinder, Double Acting - Rod Diameter | 2.6 in | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.1/5.7 seconds | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds | - | - |
| Lift Cylinder, Double Acting - Stroke | 28.7 in | - | - |
| Tilt Cylinder, Double Acting - Rod Diameter | 3.5 in | - | - |
| Tilt Cylinder, Double Acting - Stroke | 21.9 in | - | - |
| Lift Cylinder, Double Acting - Bore Diameter | 4.7 in | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.7/2.7 seconds | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Tilt Cylinder, Double Acting - Bore Diameter | 5.9 in | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.3/10.1 seconds | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
Power Train |
|||
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Traction Aid - Optional | Limited slip differential | - | - |
| Front Axle | Fixed | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Note (2) | Offset rims available to meet European roading requirements. | - | - |
| Front Axle - Traction Aid* | Locking differential (standard) | - | - |
| Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M. | - | - |
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees | - | - |
| Rear Axle | Oscillating | - | - |
Transmission |
|||
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. | - |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Forward - 1 | - | 3.9 mile/h | - |
| Forward - 2 | - | 7.4 mile/h | - |
| Forward - 3 | - | 13.1 mile/h | - |
| Forward - 4 | - | 23.3 mile/h | - |
| Reverse - 1 | - | 4.3 mile/h | - |
| Reverse - 2 | - | 8.5 mile/h | - |
| Reverse - 3 | - | 15 mile/h | - |
| Reverse - 4 | - | 24.5 mile/h | - |
Service Refill Capacities |
|||
| Rear Axles | 6.6 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Fuel Tank | 51.5 Gal | 112.5 gal (US) | - |
| Hydraulic Tank | 23.8 gal (US) | 40.4 gal (US) | - |
| Engine Crankcase | 5.3 gal (US) | - | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Cooling System | 7.9 gal (US) | 13.7 gal (US) | - |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Crankcase | - | 9.8 gal (US) | - |
| DEF Tank | - | 5.5 gal (US) | - |
| Differential - Final Drives - Front | - | 24.3 gal (US) | - |
| Differential - Final Drives - Rear | - | 24.3 gal (US) | - |
| Transmission | - | 20.3 gal (US) | - |
Steering |
|||
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). | - |
Sustainability |
|||
| Recyclability | 94% | - | - |
Operating Specifications |
|||
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. | - |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | For a machine configuration as defined under �Weight.� | - |
| Full Turn Tip Load (2) | 9302 kg (20,507 lb)~ | - | - |
| Full Turn Tip Load (1) | 9203 kg (20,289 lb)** | - | - |
| Breakout Force | - | 59060 lbf | - |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | - | 22418 kg | - |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | - | 46526 lb | - |
Bucket Capacities |
|||
| Bucket Range | - | 4.8-17.2 m³ 6.25-22.5 yd³ | - |
Sound |
|||
| Note (1) | - | ** For machines in European Union countries and in countries that adopt the �EU Directives.� | - |
| Note (2) | - | ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� | - |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | - | 109 | - |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | - | 72 dB(A) | - |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | - | 112 dB(A) | - |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | - | 78 | - |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | - | 72 dB(A) | - |
Hydraulic System |
|||
| Implement System - Maximum Operating Pressure | - | 4975 psi | - |
| Implement System - Maximum Pump Output at 2,250 rpm | - | 119 gal/min | - |
Dimensions |
|||
| Note | - | All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. | - |
Dimensions - High Lift |
|||
| Centerline of Rear Axle to Edge of Counterweight | - | 9.4 ft | - |
| Centerline of Rear Axle to Hitch | - | 6.3 ft | - |
| Ground Clearance | - | 1.4 ft | - |
| Height - Top of Exhaust Pipe | - | 12.4 ft | - |
| Height - Top of Hood | - | 10 ft | - |
| Height - Top of ROPS | - | 12.6 ft | - |
| Hinge Pin Height at Carry | - | 2.11 ft | - |
| Hinge Pin Height at Maximum Lift | - | 16.1 ft | - |
| Lift Arm Clearance at Maximum Lift | - | 13.4 ft | - |
| Overall Length - Without Bucket | - | 29.11 ft | - |
| Tread Width | - | 8.4 ft | - |
| Wheel Base | - | 12.6 ft | - |
| Width over Tires (Loaded) | - | 11.5 ft | - |
Dimensions - Standard Lift |
|||
| Centerline of Rear Axle to Edge of Counterweight | - | 8.9 ft | - |
| Centerline of Rear Axle to Hitch | - | 6.3 ft | - |
| Ground Clearance | - | 428 mm | - |
| Height - Top of Exhaust Pipe | - | 3736 mm | - |
| Height - Top of Hood | - | 3036 mm | - |
| Height - Top of ROPS | - | 3801 mm | - |
| Hinge Pin Height at Carry | - | 2.7 ft | - |
| Hinge Pin Height at Maximum Lift | - | 4741 mm | - |
| Lift Arm Clearance at Maximum Lift | - | 3902 mm | - |
| Overall Length - Without Bucket | - | 8597 mm | - |
| Tread Width | - | 8.4 ft | - |
| Wheel Base | - | 3800 mm | - |
| Width over Tires (Loaded) | - | 11.5 ft | - |
