Compare Equipment Go Back
 930M Small Wheel Loader |
 986 Wheel Loader |
 990 Wheel Loader |
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170 mhp | - | - |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Displacement (Performance Power Mode: Speed Range 1-4) | 427 in³ | - | - |
| Note (2) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 mhp | - | - |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Engine Model | Cat C7.1** | C15 Cat® | C27 Cat® |
| Displacement (Standard Power Mode: Speed Range 1-3*) | 427 in³ | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 mhp | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (3) | **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards. | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 162 mhp | - | - |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Peak Power Speed | - | 1600 | - |
| Peak Power Speed - Gross - SAE J1995 | - | 456 HP | - |
| Engine Power - ISO 14396 | - | 449 HP | 752 HP |
| Net Power - SAE J1349 | - | 373 HP | - |
| Rated Speed | - | 2000 | 1,800/min |
| Rated Speed - 2,000 rpm - EEC 80/1269 | - | 373 HP | - |
| Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | - | 378 HP | - |
| Rated Speed - 2,000 rpm - ISO 9249 | - | 373 HP | - |
| Rated Speed - 2,000 rpm - ISO 9249 (DIN) | - | 378 HP | - |
| Bore | - | 5.4 in | 5.4 in |
| Stroke | - | 6.75 in | 6 in |
| Displacement | - | 927 in² | 1649.5 in³ |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 lb/ft | - |
| Torque Rise | - | 16% | 18 % |
| Emissions | - | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA | U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent |
| Gross Power - SAE J1995 | - | - | 766 HP |
| Net Power - SAE J1349 - Standard Ambient | - | - | 699 HP |
| Net Power - SAE J1349 - High Ambient | - | - | 648 HP |
| Peak Torque - 1,200 rpm | - | - | 2624 lb/ft |
Weights |
|||
| Operating Weight | 31382 lb | - | - |
Buckets |
|||
| Bucket Capacities | 2.1-5.0 m3 (2.7-6.5 yd3) | - | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) | - | - |
| Bucket Capacities - General Purpose | 2.1-2.7 m³ (2.7-3.5 yd³) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| FOPS | ISO 3449:2005 Level II | - | - |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
- | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - | - |
| Note (3) | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. | - | - |
Service Refill Capacities |
|||
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | - | - |
| Rear Axles | 6.6 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. | - | All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
| Fuel Tank | 51.5 gal (US) | 141 gal (US) | 294.3 gal (US) |
| Engine Crankcase | 5.3 gal (US) | - | 20 gal (US) |
| Cooling System | 7.9 gal (US) | - | 54.9 gal (US) |
| Fuel Tank - Short Lift | - | 127 gal (US) | - |
| Cooling Systems | - | 26 gal (US) | - |
| Crankcase | - | 9 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 6 gal (US) | - |
| Transmission | - | 20 gal (US) | 29.1 gal (US) |
| Axle Oil - Differentials and Final Drives - Front | - | 49 gal (US) | - |
| Axle Oil - Differentials and Final Drives - Rear | - | 45 gal (US) | - |
| Hydraulic System Factory Fill | - | 87 gal (US) | 210 gal (US) |
| Hydraulic System - Tank Only | - | 34 gal (US) | - |
| Differential - Final Drives - Front | - | - | 71.6 gal (US) |
| Differential - Final Drives - Rear | - | - | 68.9 gal (US) |
| Hydraulic Tank - Implement and Hydraulic Fan | - | - | 68.9 gal (US) |
| Hydraulic Tank - Steering and Braking | - | - | 34.9 gal (US) |
Sustainability |
|||
| Recyclability | 94% | - | - |
Steering |
|||
| Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Maximum Steering Torque - 40° (Full Turn) | 27747 ft·lbf | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5 turns | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Maximum Steering Torque - 0° (Straight Machine) | 37155 ft·lbf | - | - |
| Steering Articulation Angle - Each Direction | 40° | - | - |
Loader Hydraulic System |
|||
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | 2.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | 5.7 s | - | - |
| Note (1) | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.1 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | 10.1 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | 1.7 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | 9.3 s | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
Sound |
|||
| Note (1) | European Union Directive “2000/14/EC” | - | - |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101 dB(A) | - | - |
| Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
Axles |
|||
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) | Trunnion | Trunnion |
| Front | Fixed; Locking differential (standard) | Fixed | Fixed |
| Oscillation Angle | - | ±12.5° | 8.5° |
| Oscillation Angle - Chain Arrangement | - | ±8.5° | - |
Transmission |
|||
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). | - | Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Transmission Type | - | Cat planetary power shift | Cat planetary power shift |
| Forward - 1 | - | 5 mile/h | 4.5 mile/h |
| Forward - 2 | - | 8 mile/h | 8.3 mile/h |
| Direct Drive - Forward 2 | - | 8 mile/h | 8.5 mile/h |
| Direct Drive - Forward 3 | - | 14 mile/h | 15.2 mile/h |
| Direct Drive - Forward 4 | - | 24 mile/h | - |
| Reverse - 1 | - | 5 mile/h | 4.9 mile/h |
| Reverse - 2 | - | 8 mile/h | 9.1 mile/h |
| Direct Drive - Reverse 2 | - | 9 mile/h | 9.6 mile/h |
| Direct Drive - Reverse 3 | - | 16 mile/h | 16.4 mile/h |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
| Forward - 3 | - | - | 14.2 mile/h |
| Reverse - 3 | - | - | 15.5 mile/h |
| Direct Drive - Forward 1 | - | - | Lock-up disabled |
| Direct Drive - Reverse 1 | - | - | 5.4 mile/h |
Tires |
|||
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. | - | - |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. | - | - |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. | - | - |
| Other Choices Include | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires | - | - |
| Standard Size | 20.5 R25, radial (L-3) | - | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). |
Operating Specifications |
|||
| Operating Weight - Standard | - | 97785 lb | - |
| Operating Weight - High Lift | - | 104005 lb | - |
| Rated Payload - Standard (Quarry Face) | - | 11 ton (US) | - |
| Rated Payload - Loose Material (Standard) | - | 14 ton (US) | - |
| Rated Payload - High Lift (Quarry Face) | - | 11 ton (US) | - |
| Rated Payload - Loose Material (High Lift) | - | 12.1 ton (US) | - |
| Bucket Capacity Range | - | 5-10,3 m³ (6,5-13,5 yd.³) | 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
| Cat Truck Match - Standard | - | 770/735/740/745 | 773-775 |
| Cat Truck Match - High Lift | - | 772/773 | 775-777 |
| Operating Weight | - | - | 178517 lb |
| Rated Payload - Standard | - | - | 17.5 ton (US) |
| Rated Payload - High Lift | - | - | 17.5 ton (US) |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | Load Sense | Positive flow control |
| Lift/Tilt System - Pump | - | 2 × 110 cc variable displacement | - |
| Maximum Flow at 2,165 rpm | - | 123 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 4050 psi | 4786 psi |
| Lift Cylinder - Bore | - | 7.5 in | - |
| Lift Cylinder - Stroke | - | 45 in | - |
| Tilt Cylinder - Bore | - | 6.7 in | - |
| Tilt Cylinder - Stroke | - | 28.4 in | - |
| Lift/Tilt System | - | - | Variable displacement piston |
| Maximum Flow at 1,800 rpm (1) | - | - | 240 gal/min |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | - | 235 mm × 1287 mm (9.3 in × 50.7 in) |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | - | 292.1 mm × 820 mm (11.5 in × 32.3 in) |
| Pilot System | - | - | Open loop and pressure reducing |
| Relief Valve Setting - Main | - | - | 507 psi |
Hydraulic Cycle Times |
|||
| Rack Back | - | 4.5 s | 4.3 s |
| Raise | - | 9 s | 8.2 s |
| Dump | - | 3.5 s | 2.9 s |
| Lower | - | 5.2 s | 3.7 s |
| Lower Float Down | - | 4.3 s | 3.6 s |
| Total Hydraulic Cycle Time | - | 21.3 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | - | 13.8 s |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Load Sense | Pilot, load sensing |
| Steering System - Pump | - | Piston, variable displacement | Piston, variable displacement |
| Maximum Flow at 1,400 rpm | - | 52 gal/min | 96.2 gal/min |
| Steering Cut Off Pressure | - | 4000 psi | - |
| Total Steering Angle | - | 70° | 70° |
| Relief Valve Setting - Steering | - | - | 5004 psi |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | ISO 3450: 2011 |
Operator's Cab |
|||
| ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) | - |
Sound Performance - Standard |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 112 dB(A) | - |
| Note | - |
|
- |
| Operator Sound Level (ISO 6396:2008) | - | - | 65.5 dB(A) |
| Machine Sound Level (ISO 6395:2008) | - | - | 115 dB(A) |
Sound Performance - Suppression |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
| Note | - |
|
- |
| Operator Sound Level (ISO 6396:2008) | - | - | 65.5 dB(A) |
| Machine Sound Level (ISO 6395:2008) | - | - | 113 dB(A) |
Dimensions (Approximate) - Standard Lift Linkage |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Ground to Center of Front Axle | - | 3.2 ft | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Reach - Maximum Lift | - | 7.1 ft | - |
| Clearance at Maximum Lift | - | 10.1 ft | - |
| B-Pin Height - Maximum Lift | - | 16.1 ft | - |
| Maximum Overall Height - Bucket Raised | - | 22.4 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 36.6 ft | - |
| Front Axle Centerline to Bucket Tip | - | 13.8 ft | - |
| Note | - |
|
- |
Dimensions (Approximate) - High Lift Linkage |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Ground to Center of Front Axle | - | 3.2 ft | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Reach - Maximum Lift | - | 7.4 ft | - |
| Clearance at Maximum Lift | - | 11.6 ft | - |
| B-Pin Height - Maximum Lift | - | 17.6 ft | - |
| Maximum Overall Height - Bucket Raised | - | 23.9 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 38 ft | - |
| Front Axle Centerline to Bucket Tip | - | 15.3 ft | - |
| Note | - |
|
- |
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Ground to Center of Rear Axle | - | 3.2 ft | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Reach at Maximum Lift | - | 8 ft | - |
| Clearance at Maximum Lift | - | 10.7 ft | - |
| B-Pin Height at Maximum Lift | - | 15 ft | - |
| Maximum Overall Height, Bucket Raised | - | 20.9 ft | - |
| Rear Axle Center Line to Bumper | - | 10.3 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 35 ft | - |
| Front Axle Centerline to Bucket Tip | - | 12.2 ft | - |
Dimensions (Approximate) - Quick Coupler and Fork |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Ground to Center of Rear Axle | - | 3.2 ft | - |
| Ground to Fuel Tank Clearance | - | 2.3 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| B-Pin Height at Maximum Lift | - | 15 ft | - |
| Rear Axle Center Line to Bumper | - | 10.3 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 35.4 ft | - |
| Front Axle Centerline to Bucket Tip | - | 12.6 ft | - |
