Compare Equipment Go Back
 930M Small Wheel Loader |
 988 GC Wheel Loader |
|
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170 mhp | - | - |
| Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Displacement (Performance Power Mode: Speed Range 1-4) | 427 in³ | - | - |
| Note (2) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 mhp | - | - |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Engine Model | Cat C7.1** | Cat® C15 | - |
| Displacement (Standard Power Mode: Speed Range 1-3*) | 427 in³ | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 mhp | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (3) | **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards. | - | - |
| Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) | 162 mhp | - | - |
| Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Rated Speed | - | 2000 | - |
| Peak Power Speed | - | 1600 | - |
| Engine Power - ISO 14396 | - | 449 HP | - |
| Gross Power - SAE J1995 | - | 456 HP | - |
| Net Power - SAE J1349 | - | 373 HP | - |
| Emissions | - | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 | - |
| Bore | - | 5.4 in | - |
| Stroke | - | 6.75 in | - |
| Displacement | - | 927 in³ | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 1778 ft·lbf | - |
| Torque Rise | - | 16% | - |
Weights |
|||
| Operating Weight | 31382 lb | - | - |
Buckets |
|||
| Bucket Capacities | 2.1-5.0 m3 (2.7-6.5 yd3) | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) | - | - |
| Bucket Capacities - General Purpose | 2.1-2.7 m³ (2.7-3.5 yd³) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| FOPS | ISO 3449:2005 Level II | - | - |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) |
- | - |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | - | - |
| Note (3) | *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. | - | - |
Service Refill Capacities |
|||
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | - | - |
| Rear Axles | 6.6 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. | Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a | - |
| Fuel Tank | 51.5 gal (US) | 141 gal (US) | - |
| Engine Crankcase | 5.3 gal (US) | 9 gal (US) | - |
| Cooling System | 7.9 gal (US) | 27 gal (US) | - |
| Diesel Exhaust Fluid Tank | - | 5.5 gal (US) | - |
| Transmission | - | 20 gal (US) | - |
| Differential - Final Drives - Front | - | 49 gal (US) | - |
| Differential - Final Drives - Rear | - | 45 gal (US) | - |
Sustainability |
|||
| Recyclability | 94% | 96% | - |
Steering |
|||
| Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Maximum Steering Torque - 40° (Full Turn) | 27747 ft·lbf | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5 turns | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Maximum Steering Torque - 0° (Straight Machine) | 37155 ft·lbf | - | - |
| Steering Articulation Angle - Each Direction | 40° | - | - |
Loader Hydraulic System |
|||
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level | 2.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift | 5.7 s | - | - |
| Note (1) | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.1 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.7 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time | 10.1 s | - | - |
| Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height | 1.7 s | - | - |
| Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time | 9.3 s | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
Sound |
|||
| Note (1) | European Union Directive “2000/14/EC” | - | - |
| Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101 dB(A) | - | - |
Axles |
|||
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) | Trunnion | - |
| Front | Fixed; Locking differential (standard) | Fixed | - |
| Oscillation Angle | - | +/-12.5° | - |
Transmission |
|||
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). | - | - |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Transmission Type | - | Cat planetary power shift | - |
| Forward - 1 | - | 5 mile/h | - |
| Forward - 2 | - | 8 mile/h | - |
| Reverse - 1 | - | 5 mile/h | - |
| Reverse - 2 | - | 8 mile/h | - |
| Direct Drive - Forward 1 | - | Lock-up disabled | - |
| Direct Drive - Forward 2 | - | 8 mile/h | - |
| Direct Drive - Forward 3 | - | 14 mile/h | - |
| Direct Drive - Forward 4 | - | 24 mile/h | - |
| Direct Drive - Reverse 1 | - | Lock-up disabled | - |
| Direct Drive - Reverse 2 | - | 9 mile/h | - |
| Direct Drive - Reverse 3 | - | 16 mile/h | - |
| Direct Drive - Reverse 4 | - | 25.4 mile/h | - |
Tires |
|||
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. | - | - |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. | - | - |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. | - | - |
| Other Choices Include | 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires | - | - |
| Standard Size | 20.5 R25, radial (L-3) | - | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | - |
Operating Specifications |
|||
| Operating Weight | - | 116858 lb | - |
| Rated Payload - Quarry Face | - | 12.5 ton (US) | - |
| Bucket Capacity Range | - | 6.4-7.6 m3 (8.3-10 yd3) | - |
| Cat Truck Match - High Lift | - | 772/773/775 | - |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | EH - Load Sense | - |
| Lift/Tilt System | - | 2X x 145 cc Variable displacement piston | - |
| Maximum Flow at 2,165 rpm | - | 159 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 4598 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | 190 mm x 1216 mm (7.5 in x 48 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | 170 mm x 722 mm (6.7 in x 28.4 in) | - |
| Pilot System | - | Variable displacement piston | - |
| Tilt Cylinder - Stroke | - | 27 in | - |
Hydraulic Cycle Times |
|||
| Rack Back | - | 3.8 s | - |
| Raise | - | 7.5 s | - |
| Dump | - | 3 s | - |
| Lower Float Down | - | 4.6 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 18.9 s | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Pilot, load sensing | - |
| Steering System - Pump | - | Piston, variable displacement | - |
| Maximum Flow | - | 52 gal (US) | - |
| Relief Valve Setting - Steering | - | 4000 psi | - |
| Total Steering Angle | - | 70° | - |
| Steering Cycle Times - High Idle | - | 3 s | - |
| Steering Cycle Times - Low Idle | - | 5.2 s | - |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | - |
Operator's Cab |
|||
| ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | - |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
|||
| Operator Sound Level (ISO 6396) | - | 72 dB(A) | - |
| Machine Sound Level (ISO 6395) | - | 110 dB(A) | - |
| Note (1) | - | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
| Note (2) | - | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. | - |
| Note (3) | - | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. | - |
Dimensions (Approximate) - High Lift |
|||
| Ground to Top of ROPS | - | 13.5 ft | - |
| Ground to Top of Exhaust Stacks | - | 13.3 ft | - |
| Ground to Top of Hood | - | 10.7 ft | - |
| Rear Axle - Centerline to Bumper | - | 10.3 ft | - |
| Front Axle Centerline to Bucket Tip | - | 15.7 ft | - |
| Wheel Base | - | 12.5 ft | - |
| Maximum Overall Length | - | 39.5 ft | - |
| Ground to Lower Hitch Clearance | - | 1.5 ft | - |
| Clearance at Maximum Lift | - | 12 ft | - |
| B-Pin Height - Maximum Lift | - | 18.7 ft | - |
| Maximum Overall Height - Bucket Raised | - | 25 ft | - |
| Reach - Maximum Lift | - | 7.7 ft | - |
| Note | - | Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. | - |
