CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    990 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ 1649.5 in³ 4766 in³
    Bore 3.85 in 5.4 in 6.7 in
    Stroke 4.72 in 6 in 8.5 in
    Engine Model Cat C3.6 C27 Cat® Cat® 3516E
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Rated Speed - 1,800/min -
    Engine Power - ISO 14396 - 752 HP 1847 HP
    Gross Power - SAE J1995 - 766 HP 1870 HP
    Net Power - SAE J1349 - Standard Ambient - 699 HP 1739 HP
    Net Power - SAE J1349 - High Ambient - 648 HP 1696 HP
    Peak Torque - 1,200 rpm - 2624 lb/ft -
    Torque Rise - 18 % 39%
    Peak Torque - 1,200 rpm - SAE J1995 - - 8549 lb/ft
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 19103 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) 54.9 gal (US) -
    Fuel Tank 43.6 gal (US) 294.3 gal (US) -
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l -
    Axles - Rear Center Differential 2 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Engine Crankcase 2.6 gal (US) 20 gal (US) -
    Hydraulic Tank 14.5 gal (US) - -
    Transmission 0.8 gal (US) 29.1 gal (US) -
    Axles - Front Center Differential 2 gal (US) - -
    Differential - Final Drives - Front - 71.6 gal (US) -
    Differential - Final Drives - Rear - 68.9 gal (US) -
    Hydraulic System Factory Fill - 210 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - 68.9 gal (US) -
    Hydraulic Tank - Steering and Braking - 34.9 gal (US) -

    Steering
    Maximum Flow - Steering Pump 22 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - -
    Maximum Working Pressure - Steering Pump 3263 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump 39 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. Travel speeds based on 58/85-57 tires.
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 - 4.5 mile/h 4.6 mile/h
    Forward - 2 - 8.3 mile/h 8 mile/h
    Forward - 3 - 14.2 mile/h 13.6 mile/h
    Reverse - 1 - 4.9 mile/h 5 mile/h
    Reverse - 2 - 9.1 mile/h 8.8 mile/h
    Reverse - 3 - 15.5 mile/h 14.9 mile/h
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disables
    Direct Drive - Forward 2 - 8.5 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 15.2 mile/h 15.2 mile/h
    Direct Drive - Reverse 1 - 5.4 mile/h Lock-up disables
    Direct Drive - Reverse 2 - 9.6 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 16.4 mile/h 16.8 mile/h

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - 8.5° 9°

    Operating Specifications
    Operating Weight - 178517 lb -
    Rated Payload - Standard - 17.5 ton (US) -
    Rated Payload - High Lift - 17.5 ton (US) -
    Bucket Capacity Range - 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 773-775 785/789
    Cat Truck Match - High Lift - 775-777 789/793/794
    Operating Weight - Standard - - 543772 lb
    Operating Weight - High Lift - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive flow control Positive Flow Control
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,800 rpm (1) - 240 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 235 mm × 1287 mm (9.3 in × 50.7 in) 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 292.1 mm × 820 mm (11.5 in × 32.3 in) 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - Open loop and pressure reducing Open Loop and Pressure Reducing
    Relief Valve Setting - Main - 507 psi -
    Relief Valve Setting - Lift/Tilt - 4786 psi 5004 psi
    Lift/Tilt System - Pump - - Variable Displacement Piston
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min

    Hydraulic Cycle Times
    Rack Back - 4.3 s 4.9 s
    Raise - 8.2 s 12.6 s
    Dump - 2.9 s 3.1 s
    Lower - 3.7 s -
    Lower Float Down - 3.6 s 4.2 s
    Total Hydraulic Cycle Time - Empty Bucket - 13.8 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400 rpm - 96.2 gal/min -
    Relief Valve Setting - Steering - 5004 psi -
    Total Steering Angle - 70° 80 degrees
    Steering Cycle Times - Low Idle - - 7.6 s
    Steering Cycle Times - High Idle - - 4.3 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). -

    Brakes
    Brakes - ISO 3450: 2011 ISO 3450:2011

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 65.5 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) 119 dB(A)
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 65.5 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) 117 dB(A)
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product: