CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    914 Compact Wheel Loader
    View Product
    986 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - -
    Rated Net Power - Rated Engine Speed 2200 r/min - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - -
    Rated Net Power - SAE J1349 99 HP - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - -
    Rated Net Power - ISO 9249 98 HP - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - -
    Displacement 220 in³ 927 in² 4766 in³
    Bore 3.85 in 5.4 in 6.7 in
    Stroke 4.72 in 6.75 in 8.5 in
    Engine Model Cat C3.6 C15 Cat® Cat® 3516E
    Emissions Engine meets Tier 4 Final/Stage V emission standards. U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - -
    Maximum Gross Power - ISO 14396 110 HP - -
    Peak Power Speed - 1600 -
    Peak Power Speed - Gross - SAE J1995 - 456 HP -
    Engine Power - ISO 14396 - 449 HP 1847 HP
    Net Power - SAE J1349 - 373 HP -
    Rated Speed - 2000 -
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft 8549 lb/ft
    Torque Rise - 16% 39%
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 19103 lb - -

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - -

    Sustainability
    Recyclability 95% - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) - -
    Fuel Tank 43.6 gal (US) 141 gal (US) -
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Axles - Rear Center Differential 2 gal (US) - -
    Hydraulic System - Including Tank 25.9 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - -
    Engine Crankcase 2.6 gal (US) - -
    Hydraulic Tank 14.5 gal (US) - -
    Transmission 0.8 gal (US) 20 gal (US) -
    Axles - Front Center Differential 2 gal (US) - -
    Fuel Tank - Short Lift - 127 gal (US) -
    Cooling Systems - 26 gal (US) -
    Crankcase - 9 gal (US) -
    Diesel Exhaust Fluid Tank - 6 gal (US) -
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) -
    Hydraulic System Factory Fill - 87 gal (US) -
    Hydraulic System - Tank Only - 34 gal (US) -

    Steering
    Maximum Flow - Steering Pump 22 gal/min - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s - -
    Maximum Working Pressure - Steering Pump 3263 psi - -
    Steering Articulation Angle - Each Direction 40 ° - -

    Loader Hydraulic System
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - -
    Maximum Flow - Implement Pump 39 gal/min - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - -
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - -
    Relief Pressure - Tilt Cylinder 4931 psi - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min - -
    Maximum Working Pressure - Implement Pump 4061 psi - -
    Hydraulic Cycle Time - Rackback 2.2 s - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. - Travel speeds based on 58/85-57 tires.
    Forward and Reverse - Speed Range 3 25 mile/h - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - -
    Transmission Type - Cat planetary power shift Cat Planetary Power Shift
    Forward - 1 - 5 mile/h 4.6 mile/h
    Forward - 2 - 8 mile/h 8 mile/h
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - 24 mile/h -
    Reverse - 1 - 5 mile/h 5 mile/h
    Reverse - 2 - 8 mile/h 8.8 mile/h
    Direct Drive - Reverse 2 - 9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 16 mile/h 16.8 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Forward - 3 - - 13.6 mile/h
    Reverse - 3 - - 14.9 mile/h
    Direct Drive - Forward 1 - - Lock-up disables
    Direct Drive - Reverse 1 - - Lock-up disables

    Tires
    Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - -
    Standard Size 17.5 R25 L2 XTLA - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - -
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - -

    Axles
    Rear Oscillating ±11 degrees; Locking differential (Standard) Trunnion Trunnion
    Front Fixed; Locking differential (standard) Fixed Fixed
    Oscillation Angle - ±12.5° 9°
    Oscillation Angle - Chain Arrangement - ±8.5° -

    Operating Specifications
    Operating Weight - Standard - 97785 lb 543772 lb
    Operating Weight - High Lift - 104005 lb 547675 lb
    Rated Payload - Standard (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) -
    Bucket Capacity Range - 5-10,3 m³ (6,5-13,5 yd.³) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 770/735/740/745 785/789
    Cat Truck Match - High Lift - 772/773 789/793/794
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Load Sense Positive Flow Control
    Lift/Tilt System - Pump - 2 × 110 cc variable displacement Variable Displacement Piston
    Maximum Flow at 2,165 rpm - 123 gal/min -
    Relief Valve Setting - Lift/Tilt - 4050 psi 5004 psi
    Lift Cylinder - Bore - 7.5 in -
    Lift Cylinder - Stroke - 45 in -
    Tilt Cylinder - Bore - 6.7 in -
    Tilt Cylinder - Stroke - 28.4 in -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back - 4.5 s 4.9 s
    Raise - 9 s 12.6 s
    Dump - 3.5 s 3.1 s
    Lower - 5.2 s -
    Lower Float Down - 4.3 s 4.2 s
    Total Hydraulic Cycle Time - 21.3 s -

    Hydraulic System - Steering
    Steering System - Circuit - Load Sense Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400 rpm - 52 gal/min -
    Steering Cut Off Pressure - 4000 psi -
    Total Steering Angle - 70° 80 degrees
    Steering Cycle Times - Low Idle - - 7.6 s
    Steering Cycle Times - High Idle - - 4.3 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.1 ft -
    Clearance at Maximum Lift - 10.1 ft -
    B-Pin Height - Maximum Lift - 16.1 ft -
    Maximum Overall Height - Bucket Raised - 22.4 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 36.6 ft -
    Front Axle Centerline to Bucket Tip - 13.8 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.4 ft -
    Clearance at Maximum Lift - 11.6 ft -
    B-Pin Height - Maximum Lift - 17.6 ft -
    Maximum Overall Height - Bucket Raised - 23.9 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 38 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach at Maximum Lift - 8 ft -
    Clearance at Maximum Lift - 10.7 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Maximum Overall Height, Bucket Raised - 20.9 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35 ft -
    Front Axle Centerline to Bucket Tip - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35.4 ft -
    Front Axle Centerline to Bucket Tip - 12.6 ft -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product: